main
History Download
Ray Publish 0.1.0 eca1ad5

REG113NA-5

The maker sells this part only as REG113NA-5/250, REG113NA-5/3K (TI package option addendum / ordering table: the slash suffix is the reel quantity (tape and reel); the bare code is not orderable (p.13)). The DigiKey and Mouser numbers on this page are for REG113NA-5/250.

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

REG113NA-5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Supply input voltage with operating range 1.8V to 10V and absolute maximum rating -0.3V to 12V
2 GND power_in Ground reference
3 Enable input Enable input, active high; output enabled when 1.8V to VIN, disabled when -0.2V to 0.5V
4 NR output Noise reduction reference output pin for optional external filtering capacitor to ground, voltage range -0.3V to 6.0V
5 VOUT power_out Regulated output voltage (5.0V nominal), 400mA peak current capability, 250mV typical dropout at 400mA

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Accuracy -1.5 0.5 1.5 % 3
Accuracy over temperature -2.3 2.3 % Over temperature 3
VOUT temperature coefficient vs temperature dVOUT/dT -2.3 50 2.3 ppm/°C vs temperature 3
Output voltage vs line and load -2.3 1 2.3 % IOUT = 5mA to 400mA, VIN = (VOUT + 0.4V) to 10V 3
Output voltage vs line and load over temperature -3 3 % Over temperature, IOUT = 5mA to 400mA, VIN = (VOUT + 0.6V) to 10V 3
DC dropout voltage VDROP 4 10 mV IOUT = 5mA 3
DC dropout voltage VDROP 250 325 mV IOUT = 400mA 3
DC dropout voltage over temperature VDROP 410 mV Over temperature, IOUT = 400mA 3
Current limit ICL 425 500 575 mA 3
Current limit over temperature ICL 600 mA Over temperature 3
Enable voltage high (output enabled) VENABLE 1.8 V VENABLE HIGH (output enabled); maximum printed as VIN 3
Enable voltage low (output disabled) VENABLE -0.2 0.5 V VENABLE LOW (output disabled) 3
Enable pin input current high IENABLE 1 100 nA VENABLE = 1.8V to VIN, VIN = 1.8V to 6.5(4) 3
Enable pin input current low IENABLE 2 100 nA VENABLE = 0V to 0.5V 3
Ground pin current IGND 400 500 µA IOUT = 5mA 3
Ground pin current IGND 850 1000 µA IOUT = 400mA 3
Ground pin current with enable pin low IGND 0.01 0.2 µA VENABLE ≤ 0.5V 3
Operating input voltage range VIN 1.8 10 V 3
Specified input voltage range VIN 10 V VIN > 1.8V; minimum printed as VOUT + 0.4 3
Specified input voltage range over temperature VIN 10 V Over temperature, VIN > 1.8V; minimum printed as VOUT + 0.6 3
Specified temperature range TJ -40 85 °C 3
Operating temperature range TJ -55 125 °C 3
Storage temperature range TA -65 150 °C 3
Supply input voltage VIN -0.3 12 V 2
Enable input voltage VEN -0.3 V maximum printed as VIN 2
NR pin voltage VNR -0.3 6 V 2
Operating temperature range (TJ) TJ -55 125 °C 2
Storage temperature range (TA) TA -65 150 °C 2
Lead temperature (soldering) 240 °C soldering, 3s 2
Junction-to-ambient thermal resistance, SOT23-5 θJA 200 °C/W SOT23-5 surface-mount, junction-to-ambient 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper connected to fused leads 5 to 8. See Figure 7 for thermal resistance for varying areas of copper. Using heavier copper 10

CAD (KiCad official)

  • Symbol: REG113NA-5
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: reg113na-5-etched.step / reg113na-5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); reg113na-5.step / reg113na-5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (22 pp, sha256 c0da90b6895895f3, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF