# REG102UA-5

**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8

REG102UA-5 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output voltage; pin 1 and pin 2 must both be connected, per datasheet note (2). |
| 2 | VOUT | power_out | Regulated output voltage; pin 1 and pin 2 must both be connected, per datasheet note (2). |
| 3 | NR/Adjust | passive | For REG102-A (adjustable) this is the voltage-setting resistor pin; for all other models it is the noise reduction capacitor pin (CNR, 0.01µF used in the datasheet conditions), with an absolute maximum pin voltage of -0.3V to 6.0V. |
| 4 | GND | power_in | Ground reference pin for the regulator. |
| 5 | Enable | input | Enable input: output is enabled when VENABLE is at least 1.8V and disabled when VENABLE is 0.5V or lower; the absolute maximum enable input voltage is -0.3V to VIN. |
| 6 | NC | unconnected | No internal connection. |
| 7 | VIN | power_in | Supply input; pin 7 and pin 8 must both be connected, per datasheet note (3), with an operating input range of 1.8V to 10V and an absolute maximum of 12V. |
| 8 | VIN | power_in | Supply input; pin 7 and pin 8 must both be connected, per datasheet note (3), with an operating input range of 1.8V to 10V and an absolute maximum of 12V. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |

## CAD (KiCad official)

- Symbol: `REG102UA-5`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `reg102ua-5-etched.step` / `reg102ua-5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `reg102ua-5.step` / `reg102ua-5.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/reg102) (31 pp, sha256 `4ed123459903f8b5`, retrieved 2026-10-08, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/reg102ua-5-datasheet.pdf)