component
REF6250IDGKR
Public Made by Adomby adom
Texas Instruments Voltage Reference, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownREF6250IDGKR
Texas Instruments · Voltage Reference · MSOP-8
REF6250IDGKR from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input voltage pin; for the REF6250 the supply input range is 5.3 V (min) to 5.5 V (max) at IOUT = 0 mA, and the absolute maximum VIN is 6 V. |
| 2 | EN | input | Enable pin; the enable voltage VEN is specified from 0 V to VIN V in the Recommended Operating Conditions, and VEN is limited to VIN + 0.3 V in the absolute maximum ratings. |
| 3 | SS | passive | Short-circuit current limit pin; connect a resistor to this pin to set the output short-circuit current limit, or connect it to VIN for the highest current limit. |
| 4 | FILT | passive | Filter capacitor pin; a capacitor CFILT of at least 1 µF must be connected between FILT and ground for stability. |
| 5 | OUT_S | input | Output voltage sense pin, used to sense the output voltage at the load. |
| 6 | OUT_F | output | Output voltage force pin, which drives the reference output; output current is specified at -3 mA to 3 mA for the REF6250. |
| 7 | GND_F | power_in | Ground force pin, carrying the reference's ground return current. |
| 8 | GND_S | power_in | Ground sense pin, used as the ground reference for sensing. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | -0.05 | 0.05 | % | 5 | |||
| Load regulation, sourcing and sinking (TA = 25°C) | ΔVO(ΔIL) | 2 | 20 | ppm/mA | IL = 0 mA to 3 mA, VIN = VOUT + 400 mV; TA = 25°C | 5 | |
| Load regulation, sourcing and sinking (TA = 0°C to +70°C) | ΔVO(ΔIL) | 50 | ppm/mA | IL = 0 mA to 3 mA, VIN = VOUT + 400 mV; TA = 0°C to +70°C | 5 | ||
| Line regulation (TA = 25°C) | ΔVO(ΔVI) | 7 | 60 | ppm/V | VOUT + 0.3 V ≤ VIN ≤ 5.5 V; TA = 25°C | 5 | |
| Line regulation (TA = 0°C to +70°C) | ΔVO(ΔVI) | 120 | ppm/V | VOUT + 0.3 V ≤ VIN ≤ 5.5 V; TA = 0°C to +70°C | 5 | ||
| Output voltage temperature coefficient | 3 | ppm/°C | 5 | ||||
| Stable output capacitor value | CL | 10 | 47 | µF | 5 | ||
| Supply current, active mode (TA = 25°C) | ICC | 0.83 | 0.95 | mA | Active mode, VEN = 5 V; TA = 25°C | 6 | |
| Supply current, active mode (TA = –40°C to +125°C) | ICC | 1.15 | mA | Active mode, VEN = 5 V; TA = –40°C to +125°C | 6 | ||
| Supply current, shutdown mode (TA = 25°C) | ICC | 1 | 3 | µA | Shutdown mode, VEN = 0 V; TA = 25°C | 6 | |
| Supply current, shutdown mode (TA = –40°C to +125°C) | ICC | 15 | µA | Shutdown mode, VEN = 0 V; TA = –40°C to +125°C | 6 | ||
| Enable pin current | IEN | 100 | 150 | nA | VEN = 5 V | 6 | |
| Dropout voltage (IL = 0 mA) | VDO | 100 | 300 | mV | IL = 0 mA | 6 | |
| Dropout voltage (IL = 3 mA) | VDO | 400 | mV | IL = 3 mA | 6 | ||
| Supply input voltage | VIN | 5.3 | 5.5 | V | IOUT = 0 mA | 4 | |
| Enable voltage | VEN | 0 | V | 4 | |||
| Output current (REF6250) | IL | -3 | 3 | mA | 4 | ||
| Operating temperature | TA | 0 | 25 | 70 | °C | 4 | |
| Input voltage | VIN | -0.3 | 6 | V | 4 | ||
| Enable voltage | VEN | -0.3 | V | Upper limit printed as VIN + 0.3 V | 4 | ||
| Operating temperature | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | Tj | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 158.5 | °C/W | DGK (VSSOP) 8-pin package | 4 |
CAD (KiCad official)
- Symbol:
REF6250IDGKR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ref6250idgkr-etched.step/ref6250idgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref6250idgkr.step/ref6250idgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
d270593993d712f3, retrieved 2026-10-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).