← Commit history
ref5045aidr: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+75−1
page.json+75−1@@ -33,5 +33,79 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "REF5045AIDR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Voltage Reference",+ "datasheet": "https://www.ti.com/lit/ds/symlink/ref5045a.pdf",+ "parts": {+ "symbol": "ref5045aidr.kicad_sym",+ "footprint": "ref5045aidr.kicad_mod",+ "model_3d": "ref5045aidr-etched.glb",+ "model_3d_plain": "ref5045aidr.glb",+ "model_3d_step": "ref5045aidr-etched.step",+ "model_3d_step_plain": "ref5045aidr.step",+ "lbr": "ref5045aidr.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "DNC",+ "type": "unconnected",+ "description": "Do not connect. This pin must be left floating; do not tie to any other net, power, or ground."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply voltage. Operating range VOUT+0.2 V up to 18 V (min 2.7 V for VOUT ≤ 2.5 V). Absolute max 18 V, min -0.2 V."+ },+ {+ "number": "3",+ "name": "TEMP",+ "type": "output",+ "description": "Temperature monitoring pin. Provides a temperature-dependent output voltage with typical sensitivity of 2.64 mV/°C over −40°C to 125°C. High-impedance output; buffer before loading."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return for the device. Connect to the analog ground plane."+ },+ {+ "number": "5",+ "name": "TRIM/NR",+ "type": "input",+ "description": "Output adjustment and noise reduction pin. Allows fine trim of VOUT via an external resistor divider, and lowers output noise when bypassed to GND with a capacitor (typ 1 µF). May be left floating if trim/NR is not used."+ },+ {+ "number": "6",+ "name": "VOUT",+ "type": "power_out",+ "description": "Reference voltage output, nominally 4.5 V for the REF5045. Sources or sinks up to ±10 mA. Requires a 1 µF to 10 µF ceramic output capacitor to GND for stability and low noise."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Pin is not bonded internally; may be left floating or tied to GND."+ },+ {+ "number": "8",+ "name": "DNC",+ "type": "unconnected",+ "description": "Do not connect. This pin must be left floating; do not tie to any other net, power, or ground."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}