main
Ray
ref5025mdtep: specified limits as data (metadata.characteristics, 24 rows from the datasheet)
3a38602
REF5025MDTEP
Texas Instruments · Voltage Reference · SOIC-8
REF5025MDTEP from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect to any circuit |
| 2 | VIN | power_in | Power supply voltage input ranging from VOUT + 0.2 V to 18 V maximum; recommended bypass capacitor 1 µF to 10 µF |
| 3 | TEMP | output | Temperature monitoring output providing temperature-dependent voltage nominally 575 mV at 25°C with temperature coefficient 2.64 mV/°C |
| 4 | GND | power_in | System ground reference |
| 5 | TRIM/NR | input | Trim and noise reduction input; connect 1 µF capacitor to ground to create low-pass filter and reduce output noise |
| 6 | VOUT | output | Precision voltage reference output 2.5 V factory-trimmed with ±0.05% initial accuracy, capable of sourcing and sinking ±10 mA; bypass with 1 µF to 50 µF capacitor with ESR 1 to 1.5 Ω |
| 7 | NC | unconnected | No internal connection; do not use |
| 8 | DNC | unconnected | Do not connect to any circuit |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial Accuracy | -0.05 | 0.05 | % | TA = 25°C | 4 | ||
| Output Voltage Temperature Drift | dVOUT/dT | 4 | 6.5 | ppm/°C | 5 | ||
| Line Regulation | dVOUT/dVIN | 0.1 | 1 | ppm/V | VIN = VOUT + 0.2 V | 5 | |
| Line Regulation Over Temperature | dVOUT/dVIN | 1 | 3 | ppm/V | 5 | ||
| Load Regulation | dVOUT/dILOAD | 20 | 30 | ppm/mA | –10 mA < ILOAD < +10 mA, VIN = VOUT + 0.75 V | 5 | |
| Load Regulation Over Temperature | dVOUT/dILOAD | 60 | ppm/mA | 5 | |||
| Supply Voltage | VIN | 2.7 | 18 | V | VOUT ≤ 2.5 V, see Note (1) | 5 | |
| Quiescent Current | 0.8 | 1 | mA | 5 | |||
| Quiescent Current Over Temperature | 1.25 | mA | 5 | ||||
| Specified Temperature Range | -55 | 125 | °C | 5 | |||
| Operating Temperature Range | -55 | 125 | °C | 5 | |||
| Input Voltage | VIN | 18 | V | 3 | |||
| Output Short-Circuit | 30 | mA | 3 | ||||
| Operating Temperature | -55 | 125 | °C | 3 | |||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature | Tstg | -65 | 150 | °C | 3 | ||
| ESD Human Body Model | V(ESD) | -3000 | 3000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 3 | |
| ESD Charged-Device Model | V(ESD) | -1000 | 1000 | V | CDM, per JEDEC JESD22-C101 | 3 | |
| Recommended Input Voltage | VIN | 18 | V | VIN ≥ VOUT + 0.2 V | 4 | ||
| Recommended Output Current | IOUT | -10 | 10 | mA | 4 | ||
| Junction-to-Ambient Thermal Resistance (SOIC) | RθJA | 97.1 | °C/W | D (SOIC) package, 8 pins | 4 | ||
| Junction-to-Case (Top) Thermal Resistance (SOIC) | RθJC(top) | 42.2 | °C/W | D (SOIC) package, 8 pins | 4 | ||
| Junction-to-Board Thermal Resistance (SOIC) | RθJB | 34.6 | °C/W | D (SOIC) package, 8 pins | 4 | ||
| Thermal Resistance (Electrical Table) | θJA | 150 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
REF5025MDTEP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ref5025mdtep-etched.step/ref5025mdtep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref5025mdtep.step/ref5025mdtep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
57d711031fe8f29e, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# REF5025MDTEP
**Texas Instruments** · Voltage Reference · SOIC-8
REF5025MDTEP from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect to any circuit |
| 2 | VIN | power_in | Power supply voltage input ranging from VOUT + 0.2 V to 18 V maximum; recommended bypass capacitor 1 µF to 10 µF |
| 3 | TEMP | output | Temperature monitoring output providing temperature-dependent voltage nominally 575 mV at 25°C with temperature coefficient 2.64 mV/°C |
| 4 | GND | power_in | System ground reference |
| 5 | TRIM/NR | input | Trim and noise reduction input; connect 1 µF capacitor to ground to create low-pass filter and reduce output noise |
| 6 | VOUT | output | Precision voltage reference output 2.5 V factory-trimmed with ±0.05% initial accuracy, capable of sourcing and sinking ±10 mA; bypass with 1 µF to 50 µF capacitor with ESR 1 to 1.5 Ω |
| 7 | NC | unconnected | No internal connection; do not use |
| 8 | DNC | unconnected | Do not connect to any circuit |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial Accuracy | | -0.05 | | 0.05 | % | TA = 25°C | 4 |
| Output Voltage Temperature Drift | dVOUT/dT | | 4 | 6.5 | ppm/°C | | 5 |
| Line Regulation | dVOUT/dVIN | | 0.1 | 1 | ppm/V | VIN = VOUT + 0.2 V | 5 |
| Line Regulation Over Temperature | dVOUT/dVIN | | 1 | 3 | ppm/V | | 5 |
| Load Regulation | dVOUT/dILOAD | | 20 | 30 | ppm/mA | –10 mA < ILOAD < +10 mA, VIN = VOUT + 0.75 V | 5 |
| Load Regulation Over Temperature | dVOUT/dILOAD | | | 60 | ppm/mA | | 5 |
| Supply Voltage | VIN | 2.7 | | 18 | V | VOUT ≤ 2.5 V, see Note (1) | 5 |
| Quiescent Current | | | 0.8 | 1 | mA | | 5 |
| Quiescent Current Over Temperature | | | | 1.25 | mA | | 5 |
| Specified Temperature Range | | -55 | | 125 | °C | | 5 |
| Operating Temperature Range | | -55 | | 125 | °C | | 5 |
| Input Voltage | VIN | | | 18 | V | | 3 |
| Output Short-Circuit | | | | 30 | mA | | 3 |
| Operating Temperature | | -55 | | 125 | °C | | 3 |
| Junction Temperature | TJ | | | 150 | °C | | 3 |
| Storage Temperature | Tstg | -65 | | 150 | °C | | 3 |
| ESD Human Body Model | V(ESD) | -3000 | | 3000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 3 |
| ESD Charged-Device Model | V(ESD) | -1000 | | 1000 | V | CDM, per JEDEC JESD22-C101 | 3 |
| Recommended Input Voltage | VIN | | | 18 | V | VIN ≥ VOUT + 0.2 V | 4 |
| Recommended Output Current | IOUT | -10 | | 10 | mA | | 4 |
| Junction-to-Ambient Thermal Resistance (SOIC) | RθJA | | 97.1 | | °C/W | D (SOIC) package, 8 pins | 4 |
| Junction-to-Case (Top) Thermal Resistance (SOIC) | RθJC(top) | | 42.2 | | °C/W | D (SOIC) package, 8 pins | 4 |
| Junction-to-Board Thermal Resistance (SOIC) | RθJB | | 34.6 | | °C/W | D (SOIC) package, 8 pins | 4 |
| Thermal Resistance (Electrical Table) | θJA | | 150 | | °C/W | | 5 |
## CAD (KiCad official)
- Symbol: `REF5025MDTEP`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ref5025mdtep-etched.step` / `ref5025mdtep-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ref5025mdtep.step` / `ref5025mdtep.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ref5020-ep) (30 pp, sha256 `57d711031fe8f29e`, retrieved 2026-09-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ref5025mdtep-datasheet.pdf)