Generated by kicad-footprint-generator · KiCad file format 20260206
REF5025AQDRQ1
Texas Instruments · Voltage Reference · SOIC-8
REF5025AQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect; internal no-connection pin. |
| 2 | VIN | power_in | Input supply voltage; minimum (VOUT + 0.2 V) to maximum 18 V. |
| 3 | TEMP | output | Temperature-dependent voltage output with 60-kΩ source impedance; voltage = 509 mV + 2.64 mV/°C × T(°C). |
| 4 | GND | power_in | Ground reference. |
| 5 | TRIM/NR | input | Trim and noise reduction input for ±15-mV output voltage adjustment; internal 1-kΩ resistor to ground for noise filtering with capacitor. |
| 6 | VOUT | output | Reference voltage output at nominal 2.5 V with ±0.1% initial accuracy and 7.5 μVPP noise (0.1 Hz to 10 Hz). |
| 7 | NC | unconnected | No internal connection; do not use. |
| 8 | DNC | unconnected | Do not connect; internal no-connection pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial accuracy, standard grade | -0.1 | 0.1 | % | 5 | |||
| Output voltage temperature drift, standard grade | dVOUT/dT | 3 | 8 | ppm/°C | Over temperature | 6 | |
| Line regulation | dVOUT/dVIN | 0.1 | 1 | ppm/V | All other devices; VIN = VOUT + 0.2 V | 6 | |
| Line regulation | dVOUT/dVIN | 0.2 | 1 | ppm/V | Over temperature | 6 | |
| Load regulation | dVOUT/dILOAD | 20 | 30 | ppm/mA | –10 mA < ILOAD < +10 mA; VIN = VOUT + 0.75 V | 6 | |
| Load regulation | dVOUT/dILOAD | 50 | ppm/mA | Over temperature, all devices, –10 mA < ILOAD < +10 mA | 6 | ||
| Supply input voltage | VIN | 2.7 | 18 | V | For VOUT ≤ 2.5 V (note 1); otherwise VOUT + 0.2 V | 5 | |
| Power supply voltage | VS | 18 | V | See Note (1) | 6 | ||
| Power supply, quiescent current | IQ | 0.8 | 1 | mA | 6 | ||
| Power supply, quiescent current | IQ | 1.2 | mA | Over temperature | 6 | ||
| Specified temperature range | -40 | 125 | °C | 6 | |||
| Operating temperature range | -55 | 125 | °C | 6 | |||
| Input voltage | VIN | 18 | V | 4 | |||
| Output short-circuit | 30 | mA | 4 | ||||
| Operating temperature | -40 | 125 | °C | 4 | |||
| Junction temperature (TJ max) | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Short-circuit current | ISC | 25 | mA | VOUT = 0 V | 6 | ||
| Output voltage | VOUT | 2.5 | V | 5 | |||
| Output voltage noise | 7.5 | μVPP | f = 0.1 Hz to 10 Hz | 5 | |||
| Thermal hysteresis, standard grade, cycle 1 | 10 | ppm | Cycle 1 | 6 | |||
| Thermal hysteresis, standard grade, cycle 2 | 5 | ppm | Cycle 2 | 6 | |||
| Long-term stability | 90 | ppm/1000 hr | 0 to 1000 hours | 6 | |||
| Long-term stability | 10 | ppm/1000 hr | 1000 to 2000 hours | 6 | |||
| Voltage output, TEMP pin | 575 | mV | At TA = 25°C | 6 | |||
| Temperature sensitivity, TEMP pin | 2.64 | mV/°C | Over temperature | 6 | |||
| Turn-on settling time | 200 | μs | To 0.1% with CL = 1 μF | 6 | |||
| Junction-to-ambient thermal resistance | RθJA | 107.1 | °C/W | D (SOIC), 8 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 48.8 | °C/W | D (SOIC), 8 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 48.3 | °C/W | D (SOIC), 8 pins | 5 | ||
| Junction-to-top characterization parameter | ψJT | 6.8 | °C/W | D (SOIC), 8 pins | 5 | ||
| Junction-to-board characterization parameter | ψJB | 47.6 | °C/W | D (SOIC), 8 pins | 5 |
CAD (KiCad official)
- Symbol:
REF5025AQDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ref5025aqdrq1-etched.step/ref5025aqdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref5025aqdrq1.step/ref5025aqdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
908e1bb3275e2398, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).