component
REF5025AIDGKT
Public Made by Adomby adom
Texas Instruments Voltage Reference, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
REF5025AIDGKT
Texas Instruments · Voltage Reference · VSSOP-8-0.65mm
REF5025AIDGKT from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect; this pin must be left unconnected on the REF50xxAI/REF50xxI VSSOP-8 package. |
| 2 | VIN | power_in | Input supply voltage; for REF5025AI it must be at least VOUT + 0.2V (2.7V minimum applies only to REF5020) and no more than 18V. |
| 3 | TEMP | output | Temperature-dependent voltage output (VTEMP = 509mV + 2.64mV/°C × T) with about 60kΩ source impedance and roughly ±15°C accuracy; low-impedance loads cause measurement error, so buffer it with a low-drift op amp. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | TRIM/NR | passive | Output trim or noise-reduction pin; a 1µF capacitor from this pin to GND forms a low-pass filter with a 10Hz to 20Hz corner that reduces output noise (at the cost of longer startup time), and the datasheet shows a typical trim of ±15mV using a resistor network. |
| 6 | VOUT | power_out | Reference voltage output (2.5V for REF5025); sources and sinks up to ±10mA, and requires a load capacitor CL of 1µF to 50µF from VOUT to GND with ESR of 1Ω to 1.5Ω recommended. |
| 7 | NC | unconnected | No internal connection; may be left floating or connected to GND. |
| 8 | DNC | unconnected | Do not connect; this pin must be left unconnected on the REF50xxAI/REF50xxI VSSOP-8 package. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
REF5025AIDGKT - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
ref5025aidgkt-etched.step/ref5025aidgkt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref5025aidgkt.step/ref5025aidgkt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (51 pp, sha256
4545890dc0416afc, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# REF5025AIDGKT
**Texas Instruments** · Voltage Reference · VSSOP-8-0.65mm
REF5025AIDGKT from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect; this pin must be left unconnected on the REF50xxAI/REF50xxI VSSOP-8 package. |
| 2 | VIN | power_in | Input supply voltage; for REF5025AI it must be at least VOUT + 0.2V (2.7V minimum applies only to REF5020) and no more than 18V. |
| 3 | TEMP | output | Temperature-dependent voltage output (VTEMP = 509mV + 2.64mV/°C × T) with about 60kΩ source impedance and roughly ±15°C accuracy; low-impedance loads cause measurement error, so buffer it with a low-drift op amp. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | TRIM/NR | passive | Output trim or noise-reduction pin; a 1µF capacitor from this pin to GND forms a low-pass filter with a 10Hz to 20Hz corner that reduces output noise (at the cost of longer startup time), and the datasheet shows a typical trim of ±15mV using a resistor network. |
| 6 | VOUT | power_out | Reference voltage output (2.5V for REF5025); sources and sinks up to ±10mA, and requires a load capacitor CL of 1µF to 50µF from VOUT to GND with ESR of 1Ω to 1.5Ω recommended. |
| 7 | NC | unconnected | No internal connection; may be left floating or connected to GND. |
| 8 | DNC | unconnected | Do not connect; this pin must be left unconnected on the REF50xxAI/REF50xxI VSSOP-8 package. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `REF5025AIDGKT`
- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`
- 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files: `ref5025aidgkt-etched.step` / `ref5025aidgkt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ref5025aidgkt.step` / `ref5025aidgkt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com.cn/cn/lit/ds/symlink/ref50.pdf) (51 pp, sha256 `4545890dc0416afc`, retrieved 2026-10-08, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ref5025aidgkt-datasheet.pdf)