main
Ray
Publish 0.1.0
6d18bd6
REF5020MDREP
Texas Instruments · Voltage References · SOIC-8
REF5020MDREP from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect; this pin must be left unconnected. |
| 2 | VIN | power_in | Power supply voltage, range from VOUT + 0.2 V up to 18 V, with a recommended bypass capacitor from 1 µF up to 10 µF. |
| 3 | TEMP | output | Temperature monitoring pin provides a temperature-dependent voltage output with approximately 60-kΩ source impedance. |
| 4 | GND | power_in | System ground. |
| 5 | TRIM/NR | input | Output adjustment and noise reduction input; connecting 1 µF to this pin creates a low-pass filter at the bandgap and reduces output noise. |
| 6 | VOUT | output | Very accurate, factory-trimmed voltage output, with a recommended bypass capacitor from 1 µF up to 50 µF with ESR between 1 and 1.5 Ω. |
| 7 | NC | unconnected | No internal connection. |
| 8 | DNC | unconnected | Do not connect; this pin must be left unconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 2.048 | V | 2.7 V < VIN < 18 V, TA = 25°C | 4 | ||
| Initial Accuracy | -0.05 | 0.05 | % | TA = 25°C | 4 | ||
| Output Voltage Accuracy Over Temperature | -0.08 | 0.08 | % | TA = -55°C to 125°C | 4 | ||
| Output Voltage Noise | 6 | μVPP | f = 0.1 Hz to 10 Hz | 4 | |||
| Output Voltage Temperature Drift | dVOUT/dT | 3 | 5 | ppm/°C | All other devices | 5 | |
| Line Regulation | dVOUT/dVIN | 0.1 | 1 | ppm/V | REF5020, VIN = 2.7 V to 18V | 5 | |
| Line Regulation Over Temperature | dVOUT/dVIN | 3 | ppm/V | Over Temperature | 5 | ||
| Load Regulation | dVOUT/dILOAD | 20 | 30 | ppm/mA | REF5020, -10 mA < ILOAD < +10 mA, VIN = 3 V | 5 | |
| Load Regulation Over Temperature | dVOUT/dILOAD | 60 | ppm/mA | Over Temperature | 5 | ||
| Short-Circuit Current | ISC | 25 | mA | VOUT = 0 | 5 | ||
| TEMP Pin Voltage Output | 575 | mV | At TA = 25°C | 5 | |||
| TEMP Pin Temperature Sensitivity | 2.64 | mV/°C | 5 | ||||
| Turnon Settling Time | 200 | μs | To 0.1% with CL = 1 μF | 5 | |||
| Supply Voltage | VIN | 2.7 | 18 | V | For VOUT ≤ 2.5 V, minimum supply voltage is 2.7 V | 5 | |
| Quiescent Current | 0.8 | 1 | mA | 5 | |||
| Quiescent Current Over Temperature | 1.25 | mA | Over Temperature | 5 | |||
| Specified Temperature Range | -55 | 125 | °C | 5 | |||
| Operating Temperature Range | -55 | 125 | °C | 5 | |||
| Thermal Resistance θJA (electrical table) | θJA | 150 | °C/W | 5 | |||
| Input voltage | VIN | 18 | V | 3 | |||
| Output short-circuit | 30 | mA | 3 | ||||
| Operating temperature | -55 | 125 | °C | 3 | |||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| ESD HBM | V(ESD) | -3000 | 3000 | V | Human body model, ANSI/ESDA/JEDEC JS-001 | 3 | |
| ESD CDM | V(ESD) | -1000 | 1000 | V | Charged-device model, JESD22-C101 | 3 | |
| Input voltage (recommended) | VIN | 2.7 | 18 | V | VOUT + 0.2 V min; for VOUT ≤ 2.5 V min is 2.7 V | 4 | |
| Output current | IOUT | -10 | 10 | mA | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 97.1 | °C/W | D (SOIC) 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 42.2 | °C/W | D (SOIC) 8 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 34.6 | °C/W | D (SOIC) 8 pins | 4 |
CAD (KiCad official)
- Symbol:
REF5020MDREP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ref5020mdrep-etched.step/ref5020mdrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref5020mdrep.step/ref5020mdrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
08f0a34fd368f66b, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# REF5020MDREP
**Texas Instruments** · Voltage References · SOIC-8
REF5020MDREP from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect; this pin must be left unconnected. |
| 2 | VIN | power_in | Power supply voltage, range from VOUT + 0.2 V up to 18 V, with a recommended bypass capacitor from 1 µF up to 10 µF. |
| 3 | TEMP | output | Temperature monitoring pin provides a temperature-dependent voltage output with approximately 60-kΩ source impedance. |
| 4 | GND | power_in | System ground. |
| 5 | TRIM/NR | input | Output adjustment and noise reduction input; connecting 1 µF to this pin creates a low-pass filter at the bandgap and reduces output noise. |
| 6 | VOUT | output | Very accurate, factory-trimmed voltage output, with a recommended bypass capacitor from 1 µF up to 50 µF with ESR between 1 and 1.5 Ω. |
| 7 | NC | unconnected | No internal connection. |
| 8 | DNC | unconnected | Do not connect; this pin must be left unconnected. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | | 2.048 | | V | 2.7 V < VIN < 18 V, TA = 25°C | 4 |
| Initial Accuracy | | -0.05 | | 0.05 | % | TA = 25°C | 4 |
| Output Voltage Accuracy Over Temperature | | -0.08 | | 0.08 | % | TA = -55°C to 125°C | 4 |
| Output Voltage Noise | | | 6 | | μVPP | f = 0.1 Hz to 10 Hz | 4 |
| Output Voltage Temperature Drift | dVOUT/dT | | 3 | 5 | ppm/°C | All other devices | 5 |
| Line Regulation | dVOUT/dVIN | | 0.1 | 1 | ppm/V | REF5020, VIN = 2.7 V to 18V | 5 |
| Line Regulation Over Temperature | dVOUT/dVIN | | | 3 | ppm/V | Over Temperature | 5 |
| Load Regulation | dVOUT/dILOAD | | 20 | 30 | ppm/mA | REF5020, -10 mA < ILOAD < +10 mA, VIN = 3 V | 5 |
| Load Regulation Over Temperature | dVOUT/dILOAD | | | 60 | ppm/mA | Over Temperature | 5 |
| Short-Circuit Current | ISC | | 25 | | mA | VOUT = 0 | 5 |
| TEMP Pin Voltage Output | | | 575 | | mV | At TA = 25°C | 5 |
| TEMP Pin Temperature Sensitivity | | | 2.64 | | mV/°C | | 5 |
| Turnon Settling Time | | | 200 | | μs | To 0.1% with CL = 1 μF | 5 |
| Supply Voltage | VIN | 2.7 | | 18 | V | For VOUT ≤ 2.5 V, minimum supply voltage is 2.7 V | 5 |
| Quiescent Current | | | 0.8 | 1 | mA | | 5 |
| Quiescent Current Over Temperature | | | | 1.25 | mA | Over Temperature | 5 |
| Specified Temperature Range | | -55 | | 125 | °C | | 5 |
| Operating Temperature Range | | -55 | | 125 | °C | | 5 |
| Thermal Resistance θJA (electrical table) | θJA | | 150 | | °C/W | | 5 |
| Input voltage | VIN | | | 18 | V | | 3 |
| Output short-circuit | | | | 30 | mA | | 3 |
| Operating temperature | | -55 | | 125 | °C | | 3 |
| Junction temperature | TJ | | | 150 | °C | | 3 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 3 |
| ESD HBM | V(ESD) | -3000 | | 3000 | V | Human body model, ANSI/ESDA/JEDEC JS-001 | 3 |
| ESD CDM | V(ESD) | -1000 | | 1000 | V | Charged-device model, JESD22-C101 | 3 |
| Input voltage (recommended) | VIN | 2.7 | | 18 | V | VOUT + 0.2 V min; for VOUT ≤ 2.5 V min is 2.7 V | 4 |
| Output current | IOUT | -10 | | 10 | mA | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 97.1 | | °C/W | D (SOIC) 8 pins | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 42.2 | | °C/W | D (SOIC) 8 pins | 4 |
| Junction-to-board thermal resistance | RθJB | | 34.6 | | °C/W | D (SOIC) 8 pins | 4 |
## CAD (KiCad official)
- Symbol: `REF5020MDREP`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ref5020mdrep-etched.step` / `ref5020mdrep-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ref5020mdrep.step` / `ref5020mdrep.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ref5020mdrep.pdf) (30 pp, sha256 `08f0a34fd368f66b`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ref5020mdrep-datasheet.pdf)