component
REF5020AQDRQ1
Public Made by Adomby adom
Texas Instruments Voltage Reference, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownREF5020AQDRQ1
Texas Instruments · Voltage Reference · SOIC-8
REF5020AQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect; this pin must not be used. |
| 2 | VIN | power_in | Input supply voltage, which must be at least VOUT + 0.2 V (2.7 V minimum for VOUT ≤ 2.5 V) and no more than 18 V. |
| 3 | TEMP | output | Temperature-dependent voltage output with approximately 60 kΩ source impedance, following VTEMP = 509 mV + 2.64 mV/°C × T and accurate to about ±15°C; it must be buffered when loaded. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | TRIM/NR | input | Trim and noise reduction pin that provides a ±15-mV adjustment of VOUT, and a capacitor to GND with the internal 1-kΩ resistor forms a low-pass noise filter. |
| 6 | VOUT | output | Reference voltage output, rated for up to ±10 mA sourcing and sinking. |
| 7 | NC | unconnected | No internal connection; this pin must not be used. |
| 8 | DNC | unconnected | Do not connect; this pin must not be used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
REF5020AQDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ref5020aqdrq1-etched.step/ref5020aqdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref5020aqdrq1.step/ref5020aqdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
908e1bb3275e2398, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).