component
REF5010IDGKR
Public Made by Adomby adom
Texas Instruments Voltage Reference, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownREF5010IDGKR
Texas Instruments · Voltage Reference · VSSOP-8
REF5010IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect; this pin must be left unconnected. |
| 2 | VIN | power_in | Input supply voltage; recommended range is VOUT + 0.2V to 18V and the absolute maximum is 18V for the REF50xxI. |
| 3 | TEMP | output | Temperature-monitoring output with VTEMP = 509mV + 2.64mV/°C × T and about 60kΩ source impedance, so low-impedance loads cause measurement error and should be buffered. |
| 4 | GND | power_in | Ground reference pin for the device. |
| 5 | TRIM/NR | passive | Output adjustment or noise-reduction pin; the datasheet gives no separate numeric limit for this pin on the REF50xxI variant. |
| 6 | VOUT | power_out | Reference voltage output, rated for an output current of ±10mA with an absolute maximum output voltage of -0.3V to 5.5V. |
| 7 | NC | unconnected | No internal connection. |
| 8 | DNC | unconnected | Do not connect; this pin must be left unconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
REF5010IDGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ref5010idgkr-etched.step/ref5010idgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref5010idgkr.step/ref5010idgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (52 pp, sha256
6c25f3e72085f076, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).