main
Ray
ref5010aidr: specified limits as data (metadata.characteristics, 24 rows from the datasheet)
fcaf610
REF5010AIDR
Texas Instruments · Voltage Reference · SOIC-8
REF5010AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do Not Connect. This pin must be left floating; internal connections are used by TI and any external connection can disturb device operation. |
| 2 | VIN | power_in | Input supply voltage. Recommended range is (VOUT + 0.2V) to 18V (minimum 2.7V for all except REF5020). Absolute maximum -0.2V to +18V. Bypass with 1µF ceramic capacitor to GND. |
| 3 | TEMP | output | Temperature monitor output. Provides a temperature-dependent voltage of ~575mV at 25°C with a temperature coefficient of ~2.64mV/°C over -40°C to +125°C. Used for ambient/junction temperature sensing. |
| 4 | GND | power_in | Ground reference for the device. Connect directly to the analog ground plane. |
| 5 | TRIM/NR | input | Output trim and noise-reduction pin. Allows fine adjustment of VOUT via an external resistor network, and connection of an external capacitor to reduce output noise. |
| 6 | VOUT | output | Reference voltage output. Nominal 10.0V for REF5010. Supports ±10mA source/sink capability. Bypass with 1µF (or larger, e.g. 22µF for improved transient response) to GND. Short-circuit current is typically 25mA. |
| 7 | NC | unconnected | No internal connection. May be left floating or connected to any potential without affecting device operation. |
| 8 | DNC | unconnected | Do Not Connect. This pin must be left floating; internal connections are used by TI and any external connection can disturb device operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
REF5010AIDRREF5010AIDRAIDGKREF5010AIDRAIDGKRREF5010AIDRIDGKREF5010AIDRIDGKR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial accuracy, standard grade (AID) | -0.1 | 0.1 | % | All voltage options(1) | 5 | ||
| Line regulation | ΔVO(ΔVI) | 0.1 | 1 | ppm/V | VIN = (VOUT + 0.2) 至 18V | 5 | |
| Line regulation over temperature | ΔVO(ΔVI) | 0.2 | 1 | ppm/V | VIN = VOUT + 0.2V, TA = –40°C 至 125°C | 5 | |
| Load regulation | ΔVO(ΔIL) | 20 | 30 | ppm/mA | –10mA < ILOAD < 10mA, VIN = VOUT + 0.75V | 5 | |
| Output voltage temperature drift, standard grade | dVOUT/dT | 3 | 8 | ppm/°C | 5 | ||
| Quiescent current | 0.8 | 1 | mA | 6 | |||
| Quiescent current over temperature | 1.2 | mA | TA = –40°C 至 125°C | 6 | |||
| Power supply voltage VS | VS | 18 | V | See note (1) | 6 | ||
| Recommended input voltage VIN | VIN | 18 | V | 4 | |||
| Recommended output current | IOUT | -10 | 10 | mA | 4 | ||
| Specified temperature range | -40 | 125 | °C | 6 | |||
| Input voltage (absolute maximum) | VIN | -0.2 | 18 | V | 4 | ||
| Output short-circuit current (absolute maximum) | -30 | 30 | mA | 4 | |||
| Operating temperature range (absolute maximum) | -55 | 125 | °C | 4 | |||
| Junction temperature (absolute maximum) | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD, human body model (HBM) | V(ESD) | -3000 | 3000 | V | ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD, charged device model (CDM) | V(ESD) | -1000 | 1000 | V | JEDEC JESD22-C101 | 4 | |
| Junction-to-ambient thermal resistance (D, SOIC) | RθJA | 115 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (D, SOIC) | RθJC(top) | 63.4 | °C/W | 4 | |||
| Junction-to-board thermal resistance (D, SOIC) | RθJB | 57.1 | °C/W | 4 | |||
| Junction-to-top characterization parameter (D, SOIC) | ψJT | 15.4 | °C/W | 4 | |||
| Junction-to-board characterization parameter (D, SOIC) | ψJB | 56.2 | °C/W | 4 | |||
| Output voltage, REF5010 nominal | VOUT | 10 | V | 5 |
CAD (KiCad official)
- Symbol:
REF5010AIDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ref5010aidr-etched.step/ref5010aidr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref5010aidr.step/ref5010aidr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
39d19fe7464a6867, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# REF5010AIDR
**Texas Instruments** · Voltage Reference · SOIC-8
REF5010AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do Not Connect. This pin must be left floating; internal connections are used by TI and any external connection can disturb device operation. |
| 2 | VIN | power_in | Input supply voltage. Recommended range is (VOUT + 0.2V) to 18V (minimum 2.7V for all except REF5020). Absolute maximum -0.2V to +18V. Bypass with 1µF ceramic capacitor to GND. |
| 3 | TEMP | output | Temperature monitor output. Provides a temperature-dependent voltage of ~575mV at 25°C with a temperature coefficient of ~2.64mV/°C over -40°C to +125°C. Used for ambient/junction temperature sensing. |
| 4 | GND | power_in | Ground reference for the device. Connect directly to the analog ground plane. |
| 5 | TRIM/NR | input | Output trim and noise-reduction pin. Allows fine adjustment of VOUT via an external resistor network, and connection of an external capacitor to reduce output noise. |
| 6 | VOUT | output | Reference voltage output. Nominal 10.0V for REF5010. Supports ±10mA source/sink capability. Bypass with 1µF (or larger, e.g. 22µF for improved transient response) to GND. Short-circuit current is typically 25mA. |
| 7 | NC | unconnected | No internal connection. May be left floating or connected to any potential without affecting device operation. |
| 8 | DNC | unconnected | Do Not Connect. This pin must be left floating; internal connections are used by TI and any external connection can disturb device operation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `REF5010AIDR`
- `REF5010AIDRAIDGK`
- `REF5010AIDRAIDGKR`
- `REF5010AIDRIDGK`
- `REF5010AIDRIDGKR`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial accuracy, standard grade (AID) | | -0.1 | | 0.1 | % | All voltage options(1) | 5 |
| Line regulation | ΔVO(ΔVI) | | 0.1 | 1 | ppm/V | VIN = (VOUT + 0.2) 至 18V | 5 |
| Line regulation over temperature | ΔVO(ΔVI) | | 0.2 | 1 | ppm/V | VIN = VOUT + 0.2V, TA = –40°C 至 125°C | 5 |
| Load regulation | ΔVO(ΔIL) | | 20 | 30 | ppm/mA | –10mA < ILOAD < 10mA, VIN = VOUT + 0.75V | 5 |
| Output voltage temperature drift, standard grade | dVOUT/dT | | 3 | 8 | ppm/°C | | 5 |
| Quiescent current | | | 0.8 | 1 | mA | | 6 |
| Quiescent current over temperature | | | | 1.2 | mA | TA = –40°C 至 125°C | 6 |
| Power supply voltage VS | VS | | | 18 | V | See note (1) | 6 |
| Recommended input voltage VIN | VIN | | | 18 | V | | 4 |
| Recommended output current | IOUT | -10 | | 10 | mA | | 4 |
| Specified temperature range | | -40 | | 125 | °C | | 6 |
| Input voltage (absolute maximum) | VIN | -0.2 | | 18 | V | | 4 |
| Output short-circuit current (absolute maximum) | | -30 | | 30 | mA | | 4 |
| Operating temperature range (absolute maximum) | | -55 | | 125 | °C | | 4 |
| Junction temperature (absolute maximum) | TJ | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| ESD, human body model (HBM) | V(ESD) | -3000 | | 3000 | V | ANSI/ESDA/JEDEC JS-001 | 4 |
| ESD, charged device model (CDM) | V(ESD) | -1000 | | 1000 | V | JEDEC JESD22-C101 | 4 |
| Junction-to-ambient thermal resistance (D, SOIC) | RθJA | | 115 | | °C/W | | 4 |
| Junction-to-case (top) thermal resistance (D, SOIC) | RθJC(top) | | 63.4 | | °C/W | | 4 |
| Junction-to-board thermal resistance (D, SOIC) | RθJB | | 57.1 | | °C/W | | 4 |
| Junction-to-top characterization parameter (D, SOIC) | ψJT | | 15.4 | | °C/W | | 4 |
| Junction-to-board characterization parameter (D, SOIC) | ψJB | | 56.2 | | °C/W | | 4 |
| Output voltage, REF5010 nominal | VOUT | | 10 | | V | | 5 |
## CAD (KiCad official)
- Symbol: `REF5010AIDR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ref5010aidr-etched.step` / `ref5010aidr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ref5010aidr.step` / `ref5010aidr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](docs/ref5010aidr-datasheet.pdf) (39 pp, sha256 `39d19fe7464a6867`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ref5010aidr-datasheet.pdf)