main
Ray
Publish 0.1.0
6cd5f4d
REF4132B40DBVR
Texas Instruments · Voltage Reference · SOT-23-5
REF4132B40DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No-connect pin that should be left floating. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | EN | input | Enable pin that turns the device on or off; it must not be pulled higher than VIN, with logic high at 1.6 V or higher and logic low at 0.5 V or lower. |
| 4 | VIN | power_in | Reference voltage input, specified from VREF + VDO up to 5.5 V with an absolute maximum of 6 V. |
| 5 | VREF | power_in | Reference voltage output, specified for ±10 mA output current and limited to 18 mA under short-circuit conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (TA = 25°C) | -0.05 | 0.05 | % | TA = 25°C | 5 | ||
| Output voltage temperature coefficient, B grade | 30 | ppm/℃ | -40°C ≤ TA ≤ 125°C, REF4132 B grade | 5 | |||
| Input voltage | VIN | 5.5 | V | VREF + VDO to 5.5 V; minimum printed as VREF + VDO | 5 | ||
| Quiescent current, active mode | IQ | 80 | 100 | µA | Active mode | 5 | |
| Quiescent current, shutdown mode | IQ | 2.5 | 5 | µA | Shutdown mode, VEN = 0 V | 5 | |
| Enable pin voltage, active mode | VEN | 1.6 | V | Voltage reference in active mode (EN=1) | 5 | ||
| Enable pin voltage, shutdown mode | VEN | 0.5 | V | Voltage reference in shutdown mode (EN=0) | 5 | ||
| Enable pin current | IEN | 1 | 2 | µA | VEN = 5.5 V | 5 | |
| Short circuit current | ISC | 11.5 | 18 | mA | VREF = 0 V | 5 | |
| Stable output capacitor range | CL | 0.1 | 10 | µF | 5 | ||
| Input voltage (absolute maximum) | VIN | -0.3 | 6 | V | 4 | ||
| Enable voltage (absolute maximum) | VEN | -0.3 | V | Upper limit printed as VIN + 0.3 V | 4 | ||
| Output voltage (absolute maximum) | VREF | -0.3 | 5.5 | V | 4 | ||
| Output short circuit current (absolute maximum) | ISC | 20 | mA | 4 | |||
| Operating temperature range (absolute maximum) | TA | -55 | 150 | °C | Operating free-air temperature range | 4 | |
| Storage temperature range | Tstg | -65 | 170 | °C | 4 | ||
| Input voltage (recommended) | VIN | 5.5 | V | Minimum printed as VREF + VDO | 4 | ||
| Enable voltage (recommended) | VEN | 0 | V | Maximum printed as VIN | 4 | ||
| Output current (recommended) | IL | -10 | 10 | mA | 4 | ||
| Operating temperature (recommended) | TA | -40 | 25 | 125 | ℃ | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 185 | °C/W | DBV 5-pin package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 156 | °C/W | DBV 5-pin package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 29.6 | °C/W | DBV 5-pin package | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 33.8 | °C/W | DBV 5-pin package | 4 | ||
| Junction-to-board characterization parameter | ΨJB | 29.1 | °C/W | DBV 5-pin package | 4 |
CAD (KiCad official)
- Symbol:
REF4132B40DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ref4132b40dbvr-etched.step/ref4132b40dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref4132b40dbvr.step/ref4132b40dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
5a3e7477054b0e9d, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# REF4132B40DBVR
**Texas Instruments** · Voltage Reference · SOT-23-5
REF4132B40DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No-connect pin that should be left floating. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | EN | input | Enable pin that turns the device on or off; it must not be pulled higher than VIN, with logic high at 1.6 V or higher and logic low at 0.5 V or lower. |
| 4 | VIN | power_in | Reference voltage input, specified from VREF + VDO up to 5.5 V with an absolute maximum of 6 V. |
| 5 | VREF | power_in | Reference voltage output, specified for ±10 mA output current and limited to 18 mA under short-circuit conditions. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (TA = 25°C) | | -0.05 | | 0.05 | % | TA = 25°C | 5 |
| Output voltage temperature coefficient, B grade | | | | 30 | ppm/℃ | -40°C ≤ TA ≤ 125°C, REF4132 B grade | 5 |
| Input voltage | VIN | | | 5.5 | V | VREF + VDO to 5.5 V; minimum printed as VREF + VDO | 5 |
| Quiescent current, active mode | IQ | | 80 | 100 | µA | Active mode | 5 |
| Quiescent current, shutdown mode | IQ | | 2.5 | 5 | µA | Shutdown mode, VEN = 0 V | 5 |
| Enable pin voltage, active mode | VEN | 1.6 | | | V | Voltage reference in active mode (EN=1) | 5 |
| Enable pin voltage, shutdown mode | VEN | | | 0.5 | V | Voltage reference in shutdown mode (EN=0) | 5 |
| Enable pin current | IEN | | 1 | 2 | µA | VEN = 5.5 V | 5 |
| Short circuit current | ISC | 11.5 | 18 | | mA | VREF = 0 V | 5 |
| Stable output capacitor range | CL | 0.1 | | 10 | µF | | 5 |
| Input voltage (absolute maximum) | VIN | -0.3 | | 6 | V | | 4 |
| Enable voltage (absolute maximum) | VEN | -0.3 | | | V | Upper limit printed as VIN + 0.3 V | 4 |
| Output voltage (absolute maximum) | VREF | -0.3 | | 5.5 | V | | 4 |
| Output short circuit current (absolute maximum) | ISC | | | 20 | mA | | 4 |
| Operating temperature range (absolute maximum) | TA | -55 | | 150 | °C | Operating free-air temperature range | 4 |
| Storage temperature range | Tstg | -65 | | 170 | °C | | 4 |
| Input voltage (recommended) | VIN | | | 5.5 | V | Minimum printed as VREF + VDO | 4 |
| Enable voltage (recommended) | VEN | 0 | | | V | Maximum printed as VIN | 4 |
| Output current (recommended) | IL | -10 | | 10 | mA | | 4 |
| Operating temperature (recommended) | TA | -40 | 25 | 125 | ℃ | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 185 | | °C/W | DBV 5-pin package | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 156 | | °C/W | DBV 5-pin package | 4 |
| Junction-to-board thermal resistance | RθJB | | 29.6 | | °C/W | DBV 5-pin package | 4 |
| Junction-to-top characterization parameter | ΨJT | | 33.8 | | °C/W | DBV 5-pin package | 4 |
| Junction-to-board characterization parameter | ΨJB | | 29.1 | | °C/W | DBV 5-pin package | 4 |
## CAD (KiCad official)
- Symbol: `REF4132B40DBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ref4132b40dbvr-etched.step` / `ref4132b40dbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ref4132b40dbvr.step` / `ref4132b40dbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ref4132.pdf) (26 pp, sha256 `5a3e7477054b0e9d`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ref4132b40dbvr-datasheet.pdf)