Generated by kicad-footprint-generator · KiCad file format 20260206
REF4132B25DBVRQ1
Texas Instruments · Voltage References · SOT-23-5
REF4132B25DBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | No connect pin, leave floating. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Enable pin that enables or disables the device; enable voltage range is 0 V to VIN (absolute max -0.3 V to VIN + 0.3 V). |
| 4 | VIN | power_in | Input supply, from VREF + dropout voltage up to 5.5 V recommended (absolute max 6 V). |
| 5 | VREF | power_out | Reference output, rated for ±10 mA output current (absolute max output voltage 5.5 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | -0.05 | 0.05 | % | TA = 25°C | 5 | ||
| Output voltage temperature coefficient (B grade) | 30 | ppm/℃ | -40°C ≤ TA ≤ 125°C REF4132 B grade | 5 | |||
| Input voltage | VIN | 5.5 | V | min is VREF + VDO | 5 | ||
| Quiescent current, active mode | IQ | 80 | 100 | µA | Active mode | 5 | |
| Quiescent current, shutdown mode | IQ | 2.5 | 5 | µA | Shutdown mode, VEN = 0 V | 5 | |
| Enable pin voltage, active mode | VEN | 1.6 | V | Voltage reference in active mode (EN=1) | 5 | ||
| Enable pin voltage, shutdown mode | VEN | 0.5 | V | Voltage reference in shutdown mode (EN=0) | 5 | ||
| Enable pin current | IEN | 1 | 2 | µA | VEN = 5.5 V | 5 | |
| Dropout voltage | VDO | 50 | 100 | mV | IL = 0 mA | 5 | |
| Dropout voltage | VDO | 500 | mV | IL = 10 mA | 5 | ||
| Short circuit current | ISC | 11.5 | 18 | mA | VREF = 0 V | 5 | |
| Stable output capacitor range | CL | 0.1 | 10 | µF | 5 | ||
| Turn-on time | tON | 2.5 | ms | 0.1% settling, CL = 1 µF, 10% to 90% | 5 | ||
| Low frequency noise | en(p-p) | 15 | ppm p-p | ƒ = 0.1 Hz to 10 Hz | 5 | ||
| Wide band noise | en | 24 | µVrms | ƒ = 10 Hz to 10 kHz | 5 | ||
| Long-term stability | 30 | ppm | 0 to 1000h at 35℃ | 5 | |||
| Output voltage hysteresis | VHYST | 35 | ppm | TA= 25℃ to −40℃ to 125℃ to 25℃ | 5 | ||
| Input voltage | VIN | -0.3 | 6 | V | 4 | ||
| Enable voltage | VEN | -0.3 | V | max VIN + 0.3 V | 4 | ||
| Output voltage | VREF | -0.3 | 5.5 | V | 4 | ||
| Output short circuit current | ISC | 20 | mA | 4 | |||
| Operating temperature range | TA | -55 | 150 | °C | 4 | ||
| Storage temperature range | Tstg | -65 | 170 | °C | 4 | ||
| ESD HBM | V(ESD) | -2500 | 2500 | V | Human-body model (HBM), per AEC Q100-002 | 4 | |
| ESD CDM | V(ESD) | -1500 | 1500 | V | Charged-device model (CDM), per AEC Q100-011 | 4 | |
| Input voltage | VIN | 5.5 | V | min is VREF + VDO | 4 | ||
| Enable voltage | VEN | 0 | V | max is VIN | 4 | ||
| Output current | IL | -10 | 10 | mA | 4 | ||
| Operating temperature | TA | -40 | 25 | 125 | ℃ | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 185 | °C/W | DBV 5 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 156 | °C/W | DBV 5 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 29.6 | °C/W | DBV 5 pins | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 33.8 | °C/W | DBV 5 pins | 4 | ||
| Junction-to-board characterization parameter | ΨJB | 29.1 | °C/W | DBV 5 pins | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
REF4132B25DBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ref4132b25dbvrq1-etched.step/ref4132b25dbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref4132b25dbvrq1.step/ref4132b25dbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
501c7fd203a594ac, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).