3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownREF3425QDGKRQ1
Texas Instruments · Voltage Reference · VSSOP-8 (DGK)
REF3425QDGKRQ1 from Texas Instruments, in a VSSOP-8 (DGK). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENABLE | input | Enable/disable logic input; EN ≥1.6V enables normal operation (IQ 72-95µA), EN ≤0.5V enables shutdown mode (IQ 2.5-3µA); VEN range 0V to VIN. |
| 2 | GND_S | power_in | Ground sense connection (Kelvin detection) for remote sensing of ground potential at the load location. |
| 3 | GND_F | power_in | Ground force connection (Kelvin force) establishing ground reference potential at the integrated circuit. |
| 4 | NIC | unconnected | No internal connection; test pad functional 0V to 18V; leave unconnected or tie to ground. |
| 5 | NIC | unconnected | No internal connection; test pad functional 0V to 18V; leave unconnected or tie to ground. |
| 6 | OUT_F | output | Reference voltage output force connection (Kelvin force); provides 2.5V ±0.05% at TA=25°C with output current capability ±10mA and short-circuit current limit 18-22mA. |
| 7 | OUT_S | output | Reference voltage output sense connection (Kelvin detect) for remote load voltage sensing and feedback compensation. |
| 8 | IN | power_in | Power supply input; operate from VOUT + VDO (50mV at IL=0, 500mV at IL=±10mA) minimum to 12V maximum with quiescent current 72-95µA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 (DGK) |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (absolute maximum) | IN | -0.3 | 13 | V | 5 | ||
| Enable voltage (absolute maximum) | EN | -0.3 | V | max printed as IN + 0.3 V | 5 | ||
| Output voltage (absolute maximum) | VOUT | -0.3 | 5.5 | V | 5 | ||
| Output short-circuit current | 20 | mA | 5 | ||||
| Operating temperature range (absolute maximum) | TA | -55 | 150 | °C | 5 | ||
| Storage temperature range | Tstg | -65 | 170 | °C | 5 | ||
| ESD human body model | V(ESD) | -2500 | 2500 | V | HBM, AEC Q100-002 | 5 | |
| ESD charged device model | V(ESD) | -1500 | 1500 | V | CDM, AEC Q100-011 | 5 | |
| Input voltage (recommended) | IN | 12 | V | min printed as VOUT + VDO | 5 | ||
| Enable voltage (recommended) | EN | 0 | V | max printed as IN | 5 | ||
| Output current (recommended) | IL | -10 | 10 | mA | 5 | ||
| Operating temperature (recommended) | TA | -40 | 25 | 125 | °C | 5 | |
| Output voltage accuracy | -0.05 | 0.05 | % | TA = 25°C | 6 | ||
| Output voltage temperature coefficient | 2.5 | 6 | ppm/°C | box method, see note 1 | 6 | ||
| Line regulation | ΔVO/ΔVIN | 2 | 15 | ppm/V | VIN = VOUT + VDO (2) to 12V; VDO = 50 mV per note 2 | 6 | |
| Load regulation, sourcing | ΔVO/ΔIL | 20 | 30 | ppm/mA | IL = 0mA to 10mA, VIN = VOUT + VDO (3); VDO = 500 mV per note 3 | 6 | |
| Load regulation, sinking (REF3425-Q1) | ΔVO/ΔIL | 40 | 70 | ppm/mA | IL = 0mA to -10mA, VIN = VOUT + VDO (3); VDO = 500 mV per note 3 | 6 | |
| Stable output capacitor range | CL | 0.1 | 10 | µF | 6 | ||
| Input voltage | VIN | 12 | V | min printed as VOUT + VDO | 7 | ||
| Output current capability | IL | -10 | 10 | mA | VIN = VOUT + VDO to 12V | 7 | |
| Quiescent current, operating mode | IQ | 72 | 95 | µA | 工作模式 (operating mode) | 7 | |
| Quiescent current, shutdown mode | IQ | 2.5 | 3 | µA | 关断模式 (shutdown mode); note 7: not applicable to REF34xxS | 7 | |
| Dropout voltage | VDO | 50 | 100 | mV | IL = 0mA | 7 | |
| Enable pin voltage, reference on | VEN | 1.6 | V | operating mode, EN = 1 | 7 | ||
| Enable pin voltage, reference off | VEN | 0.5 | V | shutdown mode, EN = 0 | 7 | ||
| Enable pin leakage current | IEN | 1 | 2 | µA | VEN = VIN = 12V | 7 | |
| Short-circuit current | ISC | 18 | 22 | mA | TA = 25°C, VOUT = 0V | 7 | |
| Thermal resistance, junction-to-ambient | RθJA | 174.1 | °C/W | DGK 8-pin VSSOP | 5 | ||
| Thermal resistance, junction-to-case (top) | RθJC(top) | 61.3 | °C/W | DGK 8-pin VSSOP | 5 | ||
| Thermal resistance, junction-to-board | RθJB | 95.5 | °C/W | DGK 8-pin VSSOP | 5 | ||
| Thermal characterization, junction-to-top | ΨJT | 8.5 | °C/W | DGK 8-pin VSSOP | 5 | ||
| Thermal characterization, junction-to-board | ΨJB | 93.9 | °C/W | DGK 8-pin VSSOP | 5 |
CAD (Adom-generated)
- Symbol:
REF3425QDGKRQ1 - Footprint:
Adom_Gen:Texas_Instruments_DGK0008A - 3D model: generated to fit the land (STEP)
- 3D model files:
ref3425qdgkrq1-etched.step/ref3425qdgkrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref3425qdgkrq1.step/ref3425qdgkrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
addb0b3508cd0c2e, retrieved 2026-11-21) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: TI DGK0008A EXAMPLE BOARD LAYOUT (4214862/A), ZHCSIH3C p.35, LAND PATTERN EXAMPLE: 8X pads 1.4 x 0.45 mm, (R0.05) TYP corners, 6X pitch 0.65 mm, pad row centre-to-centre (4.4) mm, so pads at x = +/-2.2, y = +/-0.325, +/-0.975. Body from PACKAGE OUTLINE p.34: 3.0 x 3.0 (2.9-3.1) mm, 1.1 mm max height, lead span 4.75-5.05. Task master ruling 2026-11-21: the maker's printed land wins over VSSOP-8_2.3x2mm_P0.5mm (a 0.5-pitch land) and KiCad's VSSOP-8_3x3mm_P0.65mm (1.625 x 0.5 at +/-2.1125).