3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownREF3225AIDBVT
Texas Instruments · Voltage Reference · SOT-23-6
REF3225AIDBVT from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND_F | power_in | Device ground connection; GND_F and GND_S differential voltage must not exceed 200mV to prevent ESD protection diode conduction. |
| 2 | GND_S | input | Load end ground remote sensing input; connects to load ground junction with maximum 200mV differential vs GND_F for Kelvin sensing. |
| 3 | ENABLE | input | Digital enable/disable input; output disabled when voltage is below 0.7V, enabled when voltage exceeds 1.5V. |
| 4 | IN | power_in | Positive power supply input; operating range from VOUT + 50mV (minimum 2.55V for REF3225) to 5.5V. |
| 5 | OUT_S | input | Remote output sensing input; connects to load output junction for Kelvin feedback regulation to compensate for trace resistance. |
| 6 | OUT_F | output | Reference voltage output; nominal 2.5V (2.495V to 2.505V typical range) with ±10mA sourcing/sinking capability when VIN ≥ VOUT + 250mV. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (REF3225, 2.5V) | VOUT | 2.495 | 2.5 | 2.505 | V | TA = +25°C, ILOAD = 0mA, VIN = 5V unless otherwise noted | 4 |
| Initial accuracy | -0.2 | 0.01 | 0.2 | % | TA = +25°C, ILOAD = 0mA, VIN = 5V unless otherwise noted | 4 | |
| Output voltage temperature drift, 0°C to +125°C | dVOUT/dT | 4 | 7 | ppm/°C | 0°C ≤ TA ≤ +125°C | 5 | |
| Output voltage temperature drift, -40°C to +125°C | dVOUT/dT | 10.5 | 20 | ppm/°C | -40°C ≤ TA ≤ +125°C | 5 | |
| Line regulation | -65 | 15 | 65 | ppm/V | VOUT + 0.05(1) ≤ VIN ≤ 5.5V | 5 | |
| Load regulation, sourcing | dVOUT/dILOAD | -40 | 3 | 40 | µV/mA | 0mA < ILOAD < 10mA, VIN = VOUT + 250mV | 5 |
| Load regulation, sinking | dVOUT/dILOAD | -60 | 20 | 60 | µV/mA | -10mA < ILOAD < 0mA, VIN = VOUT + 100mV | 5 |
| Dropout voltage | VIN – VOUT | 5 | 50 | mV | 0°C ≤ TA ≤ +125°C | 5 | |
| Output current | ILOAD | -10 | 10 | mA | VIN = VOUT + 250mV | 5 | |
| Enable threshold, reference in shutdown (VL) | VL | 0 | 0.7 | V | Reference in shutdown mode | 5 | |
| Enable threshold, reference active (VH) | VH | 1.5 | V | Reference active; the printed maximum is VIN | 5 | ||
| Input voltage | VIN | 5.5 | V | Printed minimum is VOUT + 0.05(1) | 6 | ||
| Quiescent current | IQ | 110 | 130 | µA | ENABLE > 1.5V, ILOAD = 0mA, TA = +25°C unless otherwise noted | 6 | |
| Quiescent current over temperature | IQ | 125 | 145 | µA | 0°C ≤ TA ≤ +125°C | 6 | |
| Shutdown supply current | IS | 0.1 | 1 | µA | ENABLE < 0.7V | 6 | |
| Input voltage, absolute maximum | VIN | 7.5 | V | 4 | |||
| Operating temperature, absolute maximum | TA | -55 | 135 | °C | Operating, ambient, natural convection | 4 | |
| Storage temperature, absolute maximum | TSTG | -65 | 150 | °C | 4 | ||
| Junction temperature, absolute maximum | TJ | 150 | °C | 4 | |||
| Specified operating temperature range (rating) | TA | -40 | 125 | °C | 6 | ||
| Thermal resistance, junction-to-ambient, SOT-23-6 | θJA | 200 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
REF3225AIDBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ref3225aidbvt-etched.step/ref3225aidbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref3225aidbvt.step/ref3225aidbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
4085cf61cd12affb, retrieved 2026-10-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).