main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ref3212aidbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ref3212aidbvr: viewers · Ray
package.json ref3212aidbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json ref3212aidbvr: specified limits as data (metadata.characteristics, 21 rows from the datasheet) · Ray
README.md ref3212aidbvr: specified limits as data (metadata.characteristics, 21 rows from the datasheet) · Ray
ref3212aidbvr-etched.fit.json ref3212aidbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ref3212aidbvr-etched.glb ref3212aidbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ref3212aidbvr-etched.step ref3212aidbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ref3212aidbvr.glb Publish 0.1.0 · Ray
ref3212aidbvr.kicad_mod Publish 0.1.0 · Ray
ref3212aidbvr.kicad_sym Publish 0.1.0 · Ray
ref3212aidbvr.lbr Publish 0.1.0 · Ray
ref3212aidbvr.step Publish 0.1.0 · Ray

REF3212AIDBVR

Texas Instruments · Voltage Reference · SOT-23-6

REF3212AIDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND_F power_in Device ground reference connection providing the 0V bias point for the internal circuitry.
2 GND_S input Remote load-end ground sensing input; differential voltage from GND_F must remain ≤200mV to prevent ESD diode conduction.
3 ENABLE input Digital enable/disable control input; device enters shutdown mode at ENABLE<0.7V, operates normally at ENABLE>1.5V.
4 IN power_in Positive power supply input; operating range from VOUT+50mV (minimum 1.8V for REF3212) to 5.5V, absolute maximum rating 7.5V.
5 OUT_S input Remote load-end voltage sensing input for 4-wire Kelvin measurement; enables device compensation for PCB trace voltage drops.
6 OUT_F output Reference voltage output; sources ±10mA output current with nominal 1.25V for REF3212 and 50mV minimum dropout voltage.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VOUT 1.2475 1.25 1.2525 V TA = +25°C, ILOAD = 0mA, VIN = 5V (table default) 4
Initial accuracy -0.2 0.01 0.2 % TA = +25°C, ILOAD = 0mA, VIN = 5V (table default) 4
Output voltage drift dVOUT/dT dVOUT/dT 4 7 ppm/°C 0°C ≤ TA ≤ +125°C 5
Output voltage drift dVOUT/dT dVOUT/dT 10.5 20 ppm/°C -40°C ≤ TA ≤ +125°C 5
Line regulation -65 15 65 ppm/V VOUT + 0.05(1) ≤ VIN ≤ 5.5V 5
Load regulation, sourcing dVOUT/dILOAD -40 3 40 µV/mA 0mA < ILOAD < 10mA, VIN = VOUT + 250mV 5
Load regulation, sinking dVOUT/dILOAD -60 20 60 µV/mA -10mA < ILOAD < 0mA, VIN = VOUT + 100mV 5
Dropout voltage VIN - VOUT 5 50 mV 0°C ≤ TA ≤ +125°C 5
Output current ILOAD -10 10 mA VIN = VOUT + 250mV 5
Enable/shutdown low threshold (reference shutdown) VL 0 0.7 V Reference in shutdown mode 5
Enable/shutdown high threshold (reference active) VH 1.5 V Reference active; max printed as VIN (not a numeric value) 5
Input voltage VIN 1.8 5.5 V Minimum supply for REF3212 is 1.8 V (footnote 1); max 5.5 V 6
Quiescent current IQ 110 130 µA ENABLE > 1.5V 6
Quiescent current over temperature IQ 125 145 µA 0°C ≤ TA ≤ +125°C 6
Shutdown current IS 0.1 1 µA ENABLE < 0.7V 6
Input voltage (absolute maximum) 7.5 V 4
Operating temperature (absolute maximum) -55 135 °C 4
Storage temperature -65 150 °C 4
Junction temperature 150 °C 4
Rated operating temperature range -40 125 °C Rated temperature range (额定值) 6
Thermal resistance, junction-to-ambient θJA 200 °C/W SOT23-6 6

CAD (KiCad official)

  • Symbol: REF3212AIDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ref3212aidbvr-etched.step / ref3212aidbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ref3212aidbvr.step / ref3212aidbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 4085cf61cd12affb, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF