component
REF192GRUZ-REEL7
Public Made by Adomby adom
Analog Devices Voltage Reference, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
REF192GRUZ-REEL7
Analog Devices · Voltage Reference · TSSOP-8
REF192GRUZ-REEL7 from Analog Devices, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TP | unconnected | Factory Zener-zap test pin reserved for in-package trimming; the user should leave it unconnected. |
| 2 | VS | power_in | Supply input, which must be at least 100 mV above the output voltage for stable regulation, with supply current below 45 µA. |
| 3 | SLEEP | input | Sleep-mode control that turns the output off and reduces supply current to less than 15 µA when a low TTL or CMOS level is applied. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | TP | unconnected | Factory Zener-zap test pin reserved for in-package trimming; the user should leave it unconnected. |
| 6 | OUTPUT | output | Precision voltage reference output, rated for up to 30 mA with short-circuit protection. |
| 7 | NC | unconnected | No connect; leave unconnected. |
| 8 | NC | unconnected | No connect; leave unconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial accuracy, G grade | VO | 2.49 | 2.51 | V | 6 | ||
| Line regulation, G grade (25°C) | ΔVO/ΔVIN | 4 | 8 | ppm/V | 6 | ||
| Load regulation, G grade (25°C) | ΔVO/ΔVLOAD | 6 | 15 | ppm/mA | 6 | ||
| Dropout voltage | VS − VO | 1 | V | VS = 3.5 V, ILOAD = 10 mA | 6 | ||
| Dropout voltage | VS − VO | 1.4 | V | VS = 3.9 V, ILOAD = 30 mA | 6 | ||
| Long-term stability | DVO | 1.2 | mV | 1000 hours @ 125°C | 6 | ||
| Temperature coefficient, G grade (-40°C to +85°C) | TCVO/°C | 10 | 25 | ppm/°C | 7 | ||
| Line regulation, G grade (-40°C to +85°C) | ΔVO/ΔVIN | 10 | 20 | ppm/V | 7 | ||
| Load regulation, G grade (-40°C to +85°C) | ΔVO/ΔVLOAD | 10 | 20 | ppm/mA | 7 | ||
| Dropout voltage (-40°C to +85°C) | VS − VO | 1 | V | VS = 3.5 V, ILOAD = 10 mA | 7 | ||
| Dropout voltage (-40°C to +85°C) | VS − VO | 1.5 | V | VS = 4.0 V, ILOAD = 25 mA | 7 | ||
| Sleep logic high input voltage | VH | 2.4 | V | 7 | |||
| Sleep logic high input current | IH | -8 | μA | 7 | |||
| Sleep logic low input voltage | VL | 0.8 | V | 7 | |||
| Sleep logic low input current | IL | -8 | μA | 7 | |||
| Supply current | 45 | μA | No load | 7 | |||
| Sleep mode supply current | 15 | μA | No load | 7 | |||
| Supply voltage | -0.3 | 18 | V | 16 | |||
| Output to GND (upper limit VS + 0.3 V) | -0.3 | V | 16 | ||||
| Lead temperature (soldering) | 300 | °C | Soldering 60 sec | 16 | |||
| Operating temperature range (REF19x) | -40 | 125 | °C | REF19x | 16 | ||
| Noise voltage | eN | 25 | μV p-p | 0.1 Hz to 10 Hz | 6 | ||
| Temperature coefficient, G grade (-40°C to +125°C) | TCVO/°C | 10 | ppm/°C | 7 | |||
| Line regulation, G grade (-40°C to +125°C) | ΔVO/ΔVIN | 20 | ppm/V | 7 | |||
| Load regulation, G grade (-40°C to +125°C) | ΔVO/ΔVLOAD | 20 | ppm/mA | 7 | |||
| Dropout voltage (-40°C to +125°C) | VS − VO | 1 | V | VS = 3.5 V, ILOAD = 10 mA | 7 | ||
| Dropout voltage (-40°C to +125°C) | VS − VO | 1.5 | V | VS = 4.0 V, ILOAD = 20 mA | 7 | ||
| Thermal resistance, junction to ambient, 8-lead TSSOP (RU) | θJA | 240 | °C/W | Device soldered in circuit board | 16 | ||
| Thermal resistance, junction to case, 8-lead TSSOP (RU) | θJC | 43 | °C/W | 16 |
CAD (KiCad official)
- Symbol:
REF192GRUZ-REEL7 - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ref192gruz-reel7-etched.step/ref192gruz-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref192gruz-reel7.step/ref192gruz-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (28 pp, sha256
71d24ecc74f76ebc, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# REF192GRUZ-REEL7
**Analog Devices** · Voltage Reference · TSSOP-8
REF192GRUZ-REEL7 from Analog Devices, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TP | unconnected | Factory Zener-zap test pin reserved for in-package trimming; the user should leave it unconnected. |
| 2 | VS | power_in | Supply input, which must be at least 100 mV above the output voltage for stable regulation, with supply current below 45 µA. |
| 3 | SLEEP | input | Sleep-mode control that turns the output off and reduces supply current to less than 15 µA when a low TTL or CMOS level is applied. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | TP | unconnected | Factory Zener-zap test pin reserved for in-package trimming; the user should leave it unconnected. |
| 6 | OUTPUT | output | Precision voltage reference output, rated for up to 30 mA with short-circuit protection. |
| 7 | NC | unconnected | No connect; leave unconnected. |
| 8 | NC | unconnected | No connect; leave unconnected. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial accuracy, G grade | VO | 2.49 | | 2.51 | V | | 6 |
| Line regulation, G grade (25°C) | ΔVO/ΔVIN | | 4 | 8 | ppm/V | | 6 |
| Load regulation, G grade (25°C) | ΔVO/ΔVLOAD | | 6 | 15 | ppm/mA | | 6 |
| Dropout voltage | VS − VO | | | 1 | V | VS = 3.5 V, ILOAD = 10 mA | 6 |
| Dropout voltage | VS − VO | | | 1.4 | V | VS = 3.9 V, ILOAD = 30 mA | 6 |
| Long-term stability | DVO | | | 1.2 | mV | 1000 hours @ 125°C | 6 |
| Temperature coefficient, G grade (-40°C to +85°C) | TCVO/°C | | 10 | 25 | ppm/°C | | 7 |
| Line regulation, G grade (-40°C to +85°C) | ΔVO/ΔVIN | | 10 | 20 | ppm/V | | 7 |
| Load regulation, G grade (-40°C to +85°C) | ΔVO/ΔVLOAD | | 10 | 20 | ppm/mA | | 7 |
| Dropout voltage (-40°C to +85°C) | VS − VO | | | 1 | V | VS = 3.5 V, ILOAD = 10 mA | 7 |
| Dropout voltage (-40°C to +85°C) | VS − VO | | | 1.5 | V | VS = 4.0 V, ILOAD = 25 mA | 7 |
| Sleep logic high input voltage | VH | 2.4 | | | V | | 7 |
| Sleep logic high input current | IH | | | -8 | μA | | 7 |
| Sleep logic low input voltage | VL | | | 0.8 | V | | 7 |
| Sleep logic low input current | IL | | | -8 | μA | | 7 |
| Supply current | | | | 45 | μA | No load | 7 |
| Sleep mode supply current | | | | 15 | μA | No load | 7 |
| Supply voltage | | -0.3 | | 18 | V | | 16 |
| Output to GND (upper limit VS + 0.3 V) | | -0.3 | | | V | | 16 |
| Lead temperature (soldering) | | | | 300 | °C | Soldering 60 sec | 16 |
| Operating temperature range (REF19x) | | -40 | | 125 | °C | REF19x | 16 |
| Noise voltage | eN | | 25 | | μV p-p | 0.1 Hz to 10 Hz | 6 |
| Temperature coefficient, G grade (-40°C to +125°C) | TCVO/°C | | 10 | | ppm/°C | | 7 |
| Line regulation, G grade (-40°C to +125°C) | ΔVO/ΔVIN | | 20 | | ppm/V | | 7 |
| Load regulation, G grade (-40°C to +125°C) | ΔVO/ΔVLOAD | | 20 | | ppm/mA | | 7 |
| Dropout voltage (-40°C to +125°C) | VS − VO | | 1 | | V | VS = 3.5 V, ILOAD = 10 mA | 7 |
| Dropout voltage (-40°C to +125°C) | VS − VO | | 1.5 | | V | VS = 4.0 V, ILOAD = 20 mA | 7 |
| Thermal resistance, junction to ambient, 8-lead TSSOP (RU) | θJA | | 240 | | °C/W | Device soldered in circuit board | 16 |
| Thermal resistance, junction to case, 8-lead TSSOP (RU) | θJC | | 43 | | °C/W | | 16 |
## CAD (KiCad official)
- Symbol: `REF192GRUZ-REEL7`
- Footprint: `Package_SO:TSSOP-8_3x3mm_P0.65mm`
- 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files: `ref192gruz-reel7-etched.step` / `ref192gruz-reel7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ref192gruz-reel7.step` / `ref192gruz-reel7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588914530676592640) (28 pp, sha256 `71d24ecc74f76ebc`, retrieved 2026-10-20, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ref192gruz-reel7-datasheet.pdf)