main
Ray
Publish 0.1.2
cb0c3fd
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182
{
"slug": "ref02au",
"version": "0.1.2",
"type": "component",
"description": "Texas Instruments Voltage Reference, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"ref02au"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ref02au.kicad_sym",
"ref02au.kicad_mod",
"ref02au.glb",
"ref02au.step",
"ref02au.lbr",
"docs/hero.png",
"docs/ref02au-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ref02au-etched.step",
"ref02au-etched.glb",
"ref02au-hero.glb",
"ref02au-hero.overlay.json"
],
"visibility": "public",
"author": {
"name": "Ray"
},
"component": {
"mpn": "REF02AU",
"manufacturer": "Texas Instruments",
"package": "SOIC-8",
"pin_count": 8,
"category": "Voltage Reference",
"datasheet": "https://www.ti.com/lit/ds/symlink/ref02au.pdf",
"parts": {
"symbol": "ref02au.kicad_sym",
"footprint": "ref02au.kicad_mod",
"model_3d": "ref02au-hero.glb",
"model_3d_plain": "ref02au.glb",
"model_3d_step": "ref02au-etched.step",
"model_3d_step_plain": "ref02au.step",
"lbr": "ref02au.lbr"
},
"pins": [
{
"number": "1",
"name": "NC",
"type": "unconnected",
"description": "No internal connection. Leave floating or tie to ground per board policy."
},
{
"number": "2",
"name": "VIN",
"type": "power_in",
"description": "Positive supply input. Accepts +8V to +40V (absolute maximum +40V). Typical quiescent current is 1.0mA (1.4mA max) with no load. A 0.1µF bypass capacitor to GND is recommended per the typical application circuit."
},
{
"number": "3",
"name": "Temp",
"type": "output",
"description": "Temperature-proportional voltage output. Typically 630mV at +25°C with a temperature coefficient of approximately 2.1mV/°C (−55°C to +125°C). Pin is insensitive to capacitive loading; the temperature voltage is modified by 7mV per µA of loading, so keep the load current very small."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Device ground return. Common reference for VIN, VOUT, and the Trim network."
},
{
"number": "5",
"name": "Trim",
"type": "input",
"description": "Output trim/adjust input. Connect the wiper of a 10kΩ potentiometer wired between VOUT (pin 6) and GND (pin 4) to this pin to trim the output over approximately ±150mV (±3% typ, ±6% max) around +5V. Leave floating if trimming is not used. Adjustment has minimal effect on temperature stability (~0.7ppm/°C per 100mV of trim)."
},
{
"number": "6",
"name": "VOUT",
"type": "output",
"description": "Precision +5V reference output (±15mV initial accuracy for REF02A grade). Sources up to 21mA typ and sinks up to −0.5mA typ; short-circuit protected (~30mA typ to GND or VIN). Line regulation 0.010%/V max, load regulation 0.010%/mA max."
},
{
"number": "7",
"name": "NC",
"type": "unconnected",
"description": "No internal connection. Leave floating or tie to ground per board policy."
},
{
"number": "8",
"name": "NC",
"type": "unconnected",
"description": "No internal connection. Leave floating or tie to ground per board policy."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
"cad": "KiCad official (CC-BY-SA 4.0)",
"cad_basis": {
"from": [
"README CAD section (factory cad_wording)",
".kicad_mod model path agrees"
],
"missing": []
},
"datasheet": {
"maker_url_dead": "https://www.ti.com/lit/ds/symlink/ref02au.pdf",
"url": "docs/ref02au-datasheet.pdf",
"citation": "Texas Instruments datasheet",
"citation_note": "maker link no longer resolves; copy stored with this page"
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": "REF02AU-ND",
"mouser": "595-REF02AU"
},
"distributor_check": {
"checked_at": "2026-10-05T19:14:37Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": "REF02AU-ND",
"status": "found"
},
"mouser": {
"pn": "595-REF02AU",
"status": "found"
}
},
"models_3d": [
{
"file": "ref02au.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ref02au-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "c319bb7c25a83fbce701192d926e3c88ef45a5325b9df9ae4ced95d93fd788e2",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"org": "adom"
}