main
Ray Publish 0.1.2 cb0c3fd
{
  "slug": "ref02au",
  "version": "0.1.2",
  "type": "component",
  "description": "Texas Instruments Voltage Reference, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "ref02au"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ref02au.kicad_sym",
    "ref02au.kicad_mod",
    "ref02au.glb",
    "ref02au.step",
    "ref02au.lbr",
    "docs/hero.png",
    "docs/ref02au-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ref02au-etched.step",
    "ref02au-etched.glb",
    "ref02au-hero.glb",
    "ref02au-hero.overlay.json"
  ],
  "component": {
    "mpn": "REF02AU",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Voltage Reference",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ref02au.pdf",
    "parts": {
      "symbol": "ref02au.kicad_sym",
      "footprint": "ref02au.kicad_mod",
      "model_3d": "ref02au-hero.glb",
      "model_3d_plain": "ref02au.glb",
      "model_3d_step": "ref02au-etched.step",
      "model_3d_step_plain": "ref02au.step",
      "lbr": "ref02au.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection. Leave floating or tie to ground per board policy."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Positive supply input. Accepts +8V to +40V (absolute maximum +40V). Typical quiescent current is 1.0mA (1.4mA max) with no load. A 0.1µF bypass capacitor to GND is recommended per the typical application circuit."
      },
      {
        "number": "3",
        "name": "Temp",
        "type": "output",
        "description": "Temperature-proportional voltage output. Typically 630mV at +25°C with a temperature coefficient of approximately 2.1mV/°C (−55°C to +125°C). Pin is insensitive to capacitive loading; the temperature voltage is modified by 7mV per µA of loading, so keep the load current very small."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground return. Common reference for VIN, VOUT, and the Trim network."
      },
      {
        "number": "5",
        "name": "Trim",
        "type": "input",
        "description": "Output trim/adjust input. Connect the wiper of a 10kΩ potentiometer wired between VOUT (pin 6) and GND (pin 4) to this pin to trim the output over approximately ±150mV (±3% typ, ±6% max) around +5V. Leave floating if trimming is not used. Adjustment has minimal effect on temperature stability (~0.7ppm/°C per 100mV of trim)."
      },
      {
        "number": "6",
        "name": "VOUT",
        "type": "output",
        "description": "Precision +5V reference output (±15mV initial accuracy for REF02A grade). Sources up to 21mA typ and sinks up to −0.5mA typ; short-circuit protected (~30mA typ to GND or VIN). Line regulation 0.010%/V max, load regulation 0.010%/mA max."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection. Leave floating or tie to ground per board policy."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection. Leave floating or tie to ground per board policy."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      },
      "datasheet": {
        "maker_url_dead": "https://www.ti.com/lit/ds/symlink/ref02au.pdf",
        "url": "docs/ref02au-datasheet.pdf",
        "citation": "Texas Instruments datasheet",
        "citation_note": "maker link no longer resolves; copy stored with this page"
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": "REF02AU-ND",
      "mouser": "595-REF02AU"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:14:37Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "REF02AU-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-REF02AU",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "ref02au.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ref02au-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c319bb7c25a83fbce701192d926e3c88ef45a5325b9df9ae4ced95d93fd788e2",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}