component
READ2302GSP#GC3
Public Made by Adomby adom
RENESAS Operational Amplifier, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
READ2302GSP#GC3
RENESAS · Operational Amplifier · TSSOP-8
READ2302GSP#GC3 from RENESAS, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT1 | output | Channel 1 output, swings VSS+0.1V to VDD-0.1V at Io=5mA, with no built-in over-current protection so a series resistor is advised. |
| 2 | VIN1(-) | input | Channel 1 inverting input, common mode range VSS to VDD. |
| 3 | VIN1(+) | input | Channel 1 non-inverting input, common mode range VSS to VDD. |
| 4 | VSS | power_in | Negative supply or ground pin; supply VDD-VSS must be 2.5V to 5.5V. |
| 5 | VIN2(+) | input | Channel 2 non-inverting input, common mode range VSS to VDD. |
| 6 | VIN2(-) | input | Channel 2 inverting input, common mode range VSS to VDD. |
| 7 | VOUT2 | output | Channel 2 output, swings VSS+0.1V to VDD-0.1V at Io=5mA, with no built-in over-current protection so a series resistor is advised. |
| 8 | VDD | power_in | Positive supply pin, 2.5V to 5.5V operating with absolute maximum of -0.3 to +6.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | TSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD - VSS | 2.5 | 5.5 | V | VDD=5V, TA=25°C | 3 | |
| Input offset voltage | VIO | -6 | 6 | mV | VDD=5V, TA=25°C | 3 | |
| Voltage gain | AV | 60 | 90 | dB | RL≥100kΩ | 3 | |
| Channel supply current | IDD/ch | 0.75 | 1.5 | mA | RL=∞, IO=0 | 3 | |
| Common mode rejection ratio | CMRR | 60 | 80 | dB | 3 | ||
| Supply voltage rejection ratio | SVRR | 60 | 80 | dB | 3 | ||
| Supply voltage | VDD | -0.3 | 6.5 | V | TA=25°C | 2 | |
| Maximum output current | IO | 20 | mA | TA=25°C | 2 | ||
| Power dissipation | PT | 440 | mW | TA=25°C, glass epoxy board 100mm×100mm, 1mm thick, 15% copper pattern | 2 | ||
| Junction temperature | Tj | 150 | °C | TA=25°C | 2 | ||
| Operating temp. range | TA | -40 | 105 | °C | 2 | ||
| Storage temp. range | Tstg | -55 | 150 | °C | 2 | ||
| Input offset current | IIO | 1 | pA | reference value of design | 3 | ||
| Input bias current | IB | 1 | pA | reference value of design | 3 | ||
| Gain bandwidth product | GBW | 6 | MHz | CL=20pF | 3 | ||
| Slew rate | SR | 8 | V/μs | CL=20pF | 3 |
CAD (KiCad official)
- Symbol:
READ2302GSP#GC3 - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
read2302gsp-gc3-etched.step/read2302gsp-gc3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);read2302gsp-gc3.step/read2302gsp-gc3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (9 pp, sha256
2be90860ec93ad1b, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# READ2302GSP#GC3
**RENESAS** · Operational Amplifier · TSSOP-8
READ2302GSP#GC3 from RENESAS, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT1 | output | Channel 1 output, swings VSS+0.1V to VDD-0.1V at Io=5mA, with no built-in over-current protection so a series resistor is advised. |
| 2 | VIN1(-) | input | Channel 1 inverting input, common mode range VSS to VDD. |
| 3 | VIN1(+) | input | Channel 1 non-inverting input, common mode range VSS to VDD. |
| 4 | VSS | power_in | Negative supply or ground pin; supply VDD-VSS must be 2.5V to 5.5V. |
| 5 | VIN2(+) | input | Channel 2 non-inverting input, common mode range VSS to VDD. |
| 6 | VIN2(-) | input | Channel 2 inverting input, common mode range VSS to VDD. |
| 7 | VOUT2 | output | Channel 2 output, swings VSS+0.1V to VDD-0.1V at Io=5mA, with no built-in over-current protection so a series resistor is advised. |
| 8 | VDD | power_in | Positive supply pin, 2.5V to 5.5V operating with absolute maximum of -0.3 to +6.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | TSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD - VSS | 2.5 | | 5.5 | V | VDD=5V, TA=25°C | 3 |
| Input offset voltage | VIO | -6 | | 6 | mV | VDD=5V, TA=25°C | 3 |
| Voltage gain | AV | 60 | 90 | | dB | RL≥100kΩ | 3 |
| Channel supply current | IDD/ch | | 0.75 | 1.5 | mA | RL=∞, IO=0 | 3 |
| Common mode rejection ratio | CMRR | 60 | 80 | | dB | | 3 |
| Supply voltage rejection ratio | SVRR | 60 | 80 | | dB | | 3 |
| Supply voltage | VDD | -0.3 | | 6.5 | V | TA=25°C | 2 |
| Maximum output current | IO | | | 20 | mA | TA=25°C | 2 |
| Power dissipation | PT | | | 440 | mW | TA=25°C, glass epoxy board 100mm×100mm, 1mm thick, 15% copper pattern | 2 |
| Junction temperature | Tj | | | 150 | °C | TA=25°C | 2 |
| Operating temp. range | TA | -40 | | 105 | °C | | 2 |
| Storage temp. range | Tstg | -55 | | 150 | °C | | 2 |
| Input offset current | IIO | | 1 | | pA | reference value of design | 3 |
| Input bias current | IB | | 1 | | pA | reference value of design | 3 |
| Gain bandwidth product | GBW | | 6 | | MHz | CL=20pF | 3 |
| Slew rate | SR | | 8 | | V/μs | CL=20pF | 3 |
## CAD (KiCad official)
- Symbol: `READ2302GSP#GC3`
- Footprint: `Package_SO:TSSOP-8_3x3mm_P0.65mm`
- 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files: `read2302gsp-gc3-etched.step` / `read2302gsp-gc3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `read2302gsp-gc3.step` / `read2302gsp-gc3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/read2302gsp-gc3-datasheet.pdf) (9 pp, sha256 `2be90860ec93ad1b`, retrieved 2026-10-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/read2302gsp-gc3-datasheet.pdf)