main
Ray Publish 0.1.0 3850b85
{
  "slug": "re46c141sw16tf",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Specialized Sensors, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "re46c141sw16tf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "re46c141sw16tf.kicad_sym",
    "re46c141sw16tf.kicad_mod",
    "re46c141sw16tf.glb",
    "re46c141sw16tf.step",
    "re46c141sw16tf.lbr",
    "docs/hero.png",
    "docs/re46c141sw16tf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "re46c141sw16tf-hero.glb",
    "re46c141sw16tf-hero.overlay.json"
  ],
  "component": {
    "mpn": "RE46C141SW16TF",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Sensors",
    "subcategory": "Specialized Sensors",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/017f349904d3a3b218297f5bceb5a3e9.pdf",
    "parts": {
      "symbol": "re46c141sw16tf.kicad_sym",
      "footprint": "re46c141sw16tf.kicad_mod",
      "model_3d": "re46c141sw16tf-hero.glb",
      "model_3d_plain": "re46c141sw16tf.glb",
      "model_3d_step": "re46c141sw16tf-etched.step",
      "model_3d_step_plain": "re46c141sw16tf.step",
      "lbr": "re46c141sw16tf.lbr"
    },
    "distributor_links": {
      "lcsc": "C632256"
    },
    "distributor_check": {
      "checked_at": "2026-11-20T23:26:31Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 930 calls left today"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C1",
        "type": "passive",
        "description": "The capacitor on this pin sets the high photo-amplifier gain used for push-to-test and chamber sensitivity test, with A = 1 + (C1/10) where C1 is in pF, and the gain should be <10000."
      },
      {
        "number": "2",
        "name": "C2",
        "type": "passive",
        "description": "The capacitor on this pin sets the normal photo-amplifier gain during standby, with A = 1 + (C2/10) where C2 is in pF."
      },
      {
        "number": "3",
        "name": "DETECT",
        "type": "input",
        "description": "Positive input to the photo amplifier, normally connected to the cathode of an external photodiode operated at zero bias."
      },
      {
        "number": "4",
        "name": "STROBE",
        "type": "output",
        "description": "Regulated output voltage of VDD-5 that is active during a smoke test and forms the negative side of the photo amplifier circuitry."
      },
      {
        "number": "5",
        "name": "VDD",
        "type": "power_in",
        "description": "Connect to the positive supply voltage."
      },
      {
        "number": "6",
        "name": "IRED",
        "type": "output",
        "description": "Provides a regulated pulsed output voltage pre-driver for the infrared emitter, usually driving the base of an NPN transistor."
      },
      {
        "number": "7",
        "name": "IO",
        "type": "bidirectional",
        "description": "Bidirectional pin that allows many detectors to be interconnected in a single system and has an internal pull-down device."
      },
      {
        "number": "8",
        "name": "HORNB",
        "type": "output",
        "description": "Connected to the metal electrode of a piezoelectric transducer."
      },
      {
        "number": "9",
        "name": "HORNS",
        "type": "output",
        "description": "Complementary output to HORNB that connects to the ceramic electrode of the piezoelectric transducer."
      },
      {
        "number": "10",
        "name": "FEED",
        "type": "input",
        "description": "Usually connected to the feedback electrode through a current limiting resistor; if not used, this pin must be connected to VDD or VSS."
      },
      {
        "number": "11",
        "name": "LED",
        "type": "output",
        "description": "Open-drain NMOS output used to drive a visible LED."
      },
      {
        "number": "12",
        "name": "COSC",
        "type": "passive",
        "description": "A capacitor connected to this pin with a parallel resistor sets the internal clock low time, which is approximately the clock period."
      },
      {
        "number": "13",
        "name": "ROSC",
        "type": "passive",
        "description": "A resistor between this pin and COSC (pin 12) sets the internal clock high time and also sets the IRED pulse width (100-200 uS)."
      },
      {
        "number": "14",
        "name": "VSS",
        "type": "power_in",
        "description": "Connect to the negative supply voltage."
      },
      {
        "number": "15",
        "name": "LBSET",
        "type": "input",
        "description": "Input connected to a VDD reference voltage to set the low battery warning voltage."
      },
      {
        "number": "16",
        "name": "TEST",
        "type": "input",
        "description": "Input used to invoke two test modes; it has an internal pull-down."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin names differ between sources: the pin configuration figure (page 1) prints HORNB and HORNS, whil; The datasheet shows one pin configuration diagram and does not map the ordering code suffix (SW16TF); Pin types for FEED, COSC and ROSC are inferred from their functional descriptions because the datash",
          "2/16 pins cited to the wrong page (name found elsewhere): ['8:HORNB@p6', '9:HORNS@p6']"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0616,
        "at": "2026-11-20T23:26:23"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/017f349904d3a3b218297f5bceb5a3e9.pdf",
        "pages": 12,
        "sha256": "adf2921c8e518841",
        "source_tier": "mfr",
        "citation": "Microchip Tech datasheet, copy hosted by LCSC"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "re46c141sw16tf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "re46c141sw16tf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6a4ddeeb1eeba31075b231df89da8c2bac44f5416c5cfd445a1682928a947984",
        "checked": "2026-11-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}