RC0603FR-075M11L - YAGEO

{
 "schema": "adom/verification@1",
 "part": "RC0603FR-075M11L",
 "variants": [],
 "entries": [
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "3D model matches the datasheet package dimensions",
   "scope": [
    "3d-model"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "L: model 1.600 mm, datasheet 1.50 to 1.70 mm",
     "result": "pass"
    },
    {
     "text": "W: model 0.800 mm, datasheet 0.70 to 0.90 mm",
     "result": "pass"
    },
    {
     "text": "T/H: model 0.450 mm, datasheet 0.35 to 0.55 mm",
     "result": "pass"
    },
    {
     "text": "I1 (terminal on top): model 0.255 mm, datasheet 0.10 to 0.40 mm",
     "result": "pass"
    },
    {
     "text": "I2 (terminal on bottom): model 0.255 mm, datasheet 0.10 to 0.40 mm",
     "result": "pass"
    },
    {
     "text": "Z-up, seated on z = 0, centred on the footprint origin, long axis on X",
     "result": "pass"
    },
    {
     "text": "no YAGEO STEP is reachable by plain HTTP for this part number (the product page builds its CAD links in the browser); the model is KiCad's library package, bytes unchanged, checked against the datasheet table",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "overlay (top, bottom, side, end at true scale)",
     "href": "docs/verify/rc0603fr-075m11l-overlay.png"
    },
    {
     "label": "numbers",
     "href": "docs/verify/rc0603fr-075m11l-check.json"
    },
    {
     "label": "datasheet p.4 Table 1",
     "href": "docs/figures/rc-p04-dimensions.png"
    },
    {
     "label": "datasheet (YAGEO General Purpose Chip Resistors RC_L series, product specification V.14, Nov. 14, 2025)",
     "href": "docs/rc0603fr-075m11l-datasheet.pdf"
    }
   ],
   "files": {
    "RC0603FR-075M11L.step": "1875571c326d0d9e96f36b4efeb8094068ef7619f0a449c781caf0b49c2e5861",
    "docs/rc0603fr-075m11l-datasheet.pdf": "7b6f0ae72708ca4b38126f84b5407a3e970a94cb60bc1a0afdaeb25a23d839bb"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "open",
   "title": "Footprint compared with YAGEO's recommended land pattern (KiCad IPC pads differ from YAGEO's nominal)",
   "scope": [
    "footprint"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "gap between lands: KiCad 0.85 mm, YAGEO 0.80 mm (difference +0.05 mm)",
     "result": "pass"
    },
    {
     "text": "land length: KiCad 0.80 mm, YAGEO 0.90 mm (difference -0.10 mm)",
     "result": "note"
    },
    {
     "text": "land width: KiCad 0.95 mm, YAGEO 0.80 mm (difference +0.15 mm)",
     "result": "note"
    },
    {
     "text": "overall length: KiCad 2.45 mm, YAGEO 2.60 mm (difference -0.15 mm)",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "comparison drawing",
     "href": "land-pattern/land-pattern.png"
    },
    {
     "label": "numbers",
     "href": "land-pattern/land-check.json"
    },
    {
     "label": "write-up",
     "href": "land-pattern/README.md"
    },
    {
     "label": "YAGEO Mounting p.4",
     "href": "docs/figures/mount-p04-land.png"
    }
   ],
   "files": {
    "R_0603_1608Metric_RC0603FR-075M11L.kicad_mod": "4a344201fd2f8914bf94fe757431768de19d72f796fc72807159fc1b78076d81"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Marking: datasheet code 69E on the top coat",
   "scope": [
    "3d-model",
    "marking"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "YAGEO marks RC0603 1 % parts with the EIA-96 code (p.3 Fig. 3); for 5.11 MOhm that is 69E (code 69 = 511, multiplier E = x10000) (RC_L product specification V.14, p.3 'Marking', Fig. 3; EIA-96 code table (IEC 60062))",
     "result": "pass"
    },
    {
     "text": "the marked display copy RC0603FR-075M11L-marked.step adds the code 69E as a separate flat solid group (Adom.LaserEtch) 5 um above the top coat, reading along the long axis; the unmarked KiCad STEP is kept for board CAD",
     "result": "pass"
    },
    {
     "text": "the code was derived from the EIA-96 table (value = 100 x 10^((n-1)/96), rounded); YAGEO's separate 'Chip resistors marking' sheet was not reachable to confirm it",
     "result": "note"
    },
    {
     "text": "real parts may be placed either way round; the code's reading direction on a board is not fixed",
     "result": "note"
    },
    {
     "text": "no AI-added part-number etch: the real marking is the identification shown",
     "result": "pass"
    }
   ],
   "evidence": [
    {
     "label": "datasheet p.3 Marking",
     "href": "docs/figures/rc-p03-marking.png"
    }
   ],
   "files": {
    "RC0603FR-075M11L-marked.step": "6fe72eee8676d70e73d43321ed50d42258a47b37f79ca8da842ece8bc9d7f1b6",
    "RC0603FR-075M11L.step": "1875571c326d0d9e96f36b4efeb8094068ef7619f0a449c781caf0b49c2e5861"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Board-use LOD GLBs are clean and share the STEP pose",
   "scope": [
    "lod"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "four levels written, read back, bounds equal the STEP (Z-up, metres, seat z = 0)",
     "result": "pass"
    },
    {
     "text": "no footprint, pad outline, label or silkscreen helpers; terminals present at every level",
     "result": "pass"
    },
    {
     "text": "marking code 69E kept in high and medium, omitted in low and super-low (unreadable there)",
     "result": "pass"
    },
    {
     "text": "previews looked at by the AI agent, not yet by a person",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "manifest",
     "href": "lod/manifest.json"
    }
   ],
   "files": {
    "lod/high.glb": "e68f2d77d3ce26e6e287b2f6df577580169eab1ab83ae84c2e3a335f32160faf",
    "lod/medium.glb": "b318868d6491953522ba1f29d8f3f244e86ad5f58f969abc7ea7e0fa6004f98e",
    "lod/low.glb": "284e9017acde2bcfa3285c1ab84e7c892180d543e59cbdd96d941e451ef3ddcb",
    "lod/super-low.glb": "034c2fc80d14668e84fcb3aec3eb66bad9117f565815685eb2936957d104f960"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Pin 1, polarity and symbol",
   "scope": [
    "footprint",
    "3d-model",
    "symbol"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "non-polar two-terminal resistor: pads 1 and 2 are interchangeable; symbol pins 1 and 2 map to pads 1 and 2",
     "result": "pass"
    },
    {
     "text": "symbol pin ends at (0, +5.08) and (0, -5.08) mm, on the 2.54 mm grid",
     "result": "pass"
    },
    {
     "text": "symbol fields MPN, Manufacturer, Mouser, DigiKey, LCSC, Datasheet and Footprint filled",
     "result": "pass"
    },
    {
     "text": "model terminals sit on the footprint pads (both centred on the origin, long axis on X)",
     "result": "pass"
    }
   ],
   "evidence": [],
   "files": {
    "R_0603_1608Metric_RC0603FR-075M11L.kicad_mod": "4a344201fd2f8914bf94fe757431768de19d72f796fc72807159fc1b78076d81",
    "RC0603FR-075M11L.kicad_sym": "0cb7e440b08a686d2e1d7dca2992690bcafef68d2273748e4130b02a1e4fce71",
    "RC0603FR-075M11L.step": "1875571c326d0d9e96f36b4efeb8094068ef7619f0a449c781caf0b49c2e5861"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Hero GLB built to the adom-hero standard",
   "scope": [
    "3d-model",
    "hero"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "built with component-hero hero_glb.py from package-reference.glb, the footprint and page.json; alignment check OK",
     "result": "pass"
    },
    {
     "text": "teal dashed pad outlines (alpha 0.5), silkscreen (alpha 0.3) and pad-number labels 1 and 2 (alpha 0.5); no pin-1 dot because the part is non-polar",
     "result": "pass"
    },
    {
     "text": "preview looked at by the AI agent; the live wiki viewer still needs a person's look",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "preview",
     "href": "docs/verify/hero-preview.png"
    },
    {
     "label": "overlay record",
     "href": "rc0603fr-075m11l-hero.overlay.json"
    }
   ],
   "files": {
    "rc0603fr-075m11l-hero.glb": "4ec57941fced156a5bf38d143f314d401d3ecd5e8b17d7596787308c8d159df1",
    "package-reference.glb": "fe254617aace0e21a6c4c60bbcdb105dd5c8e71580c7b0796d9f9d61ba7bb1f5"
   }
  },
  {
   "date": "2026-10-21",
   "by": {
    "name": "Claude (AI agent) for John Lauer",
    "handle": "john"
   },
   "status": "verified",
   "title": "Fusion and Altium libraries generated from the KiCad symbol and footprint",
   "scope": [
    "symbol",
    "footprint"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "adom-lbr generate --part-metadata page.json: .lbr lint passed (MPN, MANUFACTURER, MOUSER_PN, DIGIKEY_PN, LCSC_PN attributes)",
     "result": "pass"
    },
    {
     "text": "adom-lbr import-kicad then assemble-altium --no-dedupe: native .SchLib and .PcbLib written, STEP body embedded (models.embedded 1); the KiCad fields carried as Altium parameters",
     "result": "pass"
    },
    {
     "text": "not yet opened in Fusion or Altium (no desktop app used for this page)",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {
    "RC0603FR-075M11L.lbr": "8785d3874c042307ecf4bf46254c5b6170342f358cd0b6430233a4a1b02ec57c",
    "altium/RC0603FR-075M11L.SchLib": "71aa54bd5e6a5470ad898e745365cad39e9e1089446d3845bcaa21791379fb8d",
    "altium/RC0603FR-075M11L.PcbLib": "c33f8caebb7365a712c0bfc5767dd3b9a2080cb5f4e41136ea3782636a2156fe",
    "RC0603FR-075M11L.adom-lbr.json": "d41012a11ea1a1cc7f84fc85d0b1cf0a882c2f94bf011ff5be82ec8e4631a9d3"
   }
  }
 ]
}