component

RC0402FR-07102KL - YAGEO

Public Made by Adom

by adom

Thick film chip resistor 102 kOhm +/-1 %, 1/16 W, 0402 (1005 metric)

hardwarecomponentpassiveresistor0402yageo
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
rc0402fr-07102kl / README.md
History Download
John Lauer Component record for rc0402fr-07102kl: files batch 1 0f35891 1d ago

RC0402FR-07102KL

YAGEO RC0402FR-07102KL: Thick film chip resistor 102 kOhm +/-1 %, 1/16 W, 0402 (1005 metric).

Field Value
Manufacturer YAGEO Corporation
Manufacturer part number RC0402FR-07102KL
Type Thick film chip resistor
Value 102 kOhm
Tolerance +/-1 % (F)
Voltage 50 V max working, 100 V max overload
Power rating 1/16 W (0.0625 W) at 70 C
Operating temperature -55 to 155 C
Package 0402 (1005 metric)
Datasheet YAGEO General Purpose Chip Resistors RC_L series, product specification V.14, Nov. 14, 2025

Key specifications

Parameter Value Datasheet
Resistance 102 kOhm (code 102K), E96 value p.2 ordering information (6)
Tolerance +/-1 % (code F); the 1 % range for RC0402 is 1 Ohm to 10 MOhm (E24/E96) p.2 (2), p.5 Table 2
Rated power 1/16 W (0.0625 W) at 70 C, standard power (reel code 07); derated linearly to 0 at 155 C p.2 (5), p.5 Table 2, p.7 Fig. 10-1
Continuous working voltage at this value 50 V: the max working voltage applies, because sqrt(P x R) with P = 0.0625 W gives 79.8 V p.7 rated voltage formula, p.5 Table 2
Max working voltage 50 V p.5 Table 2
Max overload voltage 100 V p.5 Table 2
Dielectric withstanding voltage 100 V p.5 Table 2
Temperature coefficient +/-100 ppm/C (row 10 Ohm < R <= 10 MOhm) p.5 Table 2
Operating temperature -55 to 155 C p.5 Table 2, p.7
Technology thick film on ceramic substrate, matte tin on nickel-barrier terminations p.4 Construction
Size L 1.00 +/-0.05, W 0.50 +/-0.05, H 0.35 +/-0.05, I1 0.20 +/-0.10, I2 0.25 +/-0.10 (mm) p.4 Table 1
Packaging (R, 07) 7 inch (178 mm) paper taping reel, 10000 pcs p.2 (3) (5), p.7 Table 4
Moisture sensitivity MSL 1 p.2 Features

All page numbers refer to the PDF in docs/ unless stated otherwise.

Notes

  • Mouser lists the part as 'RoHS Compliant By Exemption'; the datasheet (p.2) says Pb-glass contained in electrodes, resistor element and glass is exempted by RoHS. DigiKey lists it as ROHS3 compliant.
  • The DigiKey number is the full-reel (TR) listing; DigiKey usually also offers cut tape (CT) and Digi-Reel under sibling numbers.

Ordering

Distributor Part number Stock seen 2026-10-21
Mouser 603-RC0402FR-07102KL 26,338
DigiKey YAG2944TR-ND 148,215
LCSC / JLCPCB none found n/a

LCSC: Not found on 2026-10-21: the Adom parts search (JLCPCB/LCSC catalog) returned no hit for this exact part number; LCSC's own web search refused plain HTTP (403). Check LCSC before ordering; a C number can be added later.

Stock figures are a snapshot from the Adom parts search on 2026-10-21; check the distributor before ordering.

Manufacturer and resources

Resource Link
Product page https://yageogroup.com/products/productDetail/RC0402FR-07102KL
Datasheet YAGEO General Purpose Chip Resistors RC_L series, product specification V.14, Nov. 14, 2025, PDF (source)
Supporting document YAGEO Chip Resistors Mounting, product specification V.10, Feb. 13, 2018, PDF (source)

Pins

Pin Function
1 terminal (non-polar)
2 terminal (non-polar)

A resistor of this kind has no polarity and no pin 1 orientation: either terminal may face either way. The KiCad symbol is the standard resistor graphic with its pin ends at (0, +5.08) and (0, -5.08) mm, on the 2.54 mm grid.

Land pattern: KiCad footprint vs YAGEO

Land pattern
    Land pattern    		 The footprint is KiCad's standard `R_0402_1005Metric`, and this guide lays its pads over the land pattern recommended by YAGEO, at true scale. It matches the maker closely. Use it to decide whether to keep the KiCad pads or shrink them to the maker's numbers before layout.

The comparison, with the numbers

3D model

No manufacturer STEP for this exact part number could be fetched over plain HTTP: YAGEO's product page builds its CAD links in the browser through a SamacSys (componentsearchengine.com) plugin, and that site answered 403 to a plain request on 2026-10-21. The page therefore uses KiCad's library model for the package, R_0402_1005Metric.step, with its bytes unchanged, renamed RC0402FR-07102KL.step. It was checked against the datasheet table before use (next section). The GLB for the page viewer was made from it with step2glb convert. YAGEO states 'No Marking' for RC0402 (Fig. 1) (searched: RC_L product specification V.14, p.3 'Marking'), so the model shows a plain body and no part number was etched on it.

The page's 3D view shows rc0402fr-07102kl-hero.glb: the same package with nonphysical footprint artwork drawn just below the seating plane (teal dashed pad outlines, the footprint's silkscreen lines and the pad numbers 1 and 2), following the adom-hero 1.4 layout. That artwork is only for reading the page; package-reference.glb and the lod/ files are the clean board-use models.

Hero preview, top and oblique

Model checked against the datasheet

The model was rendered in orthographic top, bottom, side and end views at true scale and laid over a drawing made at the same scale from the printed table (nominal outline, tolerance limits, allowed terminal band). Every dimension is inside the printed range: L 1.000 mm (datasheet 0.95 to 1.05), W 0.500 mm (datasheet 0.45 to 0.55), T/H 0.350 mm (datasheet 0.30 to 0.40), I1 (terminal on top) 0.165 mm (datasheet 0.10 to 0.30), I2 (terminal on bottom) 0.165 mm (datasheet 0.15 to 0.35). The model is Z-up, seated on z = 0, centred on the footprint origin, long axis on X.

Model over the datasheet dimensions

Source: YAGEO General Purpose Chip Resistors RC_L series, product specification V.14, Nov. 14, 2025, p.4 Table 1, RC0402: L 1.00 +/-0.05, W 0.50 +/-0.05, H 0.35 +/-0.05, I1 0.20 +/-0.10, I2 0.25 +/-0.10 (mm).

Board levels of detail

Clean board-use GLBs (no footprint pads, outlines, labels or silkscreen; no marking) in four levels, all in the same Z-up, metre, footprint-origin pose as the STEP. Previews are rendered from each GLB.

Datasheet pages cited

Crops of the pages this record cites, rendered from the PDFs in docs/ (index with page numbers and PDF hashes: docs/figures/figures.json).

p.2 ordering information: global part number fields (rc0402fr-07102kl-datasheet.pdf, page 2)

p.2 ordering information: global part number fields

p.3 marking: RC0402 'No Marking' (Fig. 1) (rc0402fr-07102kl-datasheet.pdf, page 3)

p.3 marking: RC0402 'No Marking' (Fig. 1)

p.4 construction, Fig. 9 outline and Table 1 dimensions (rc0402fr-07102kl-datasheet.pdf, page 4)

p.4 construction, Fig. 9 outline and Table 1 dimensions

p.5 Table 2 electrical characteristics, RC0402 rows (rc0402fr-07102kl-datasheet.pdf, page 5)

p.5 Table 2 electrical characteristics, RC0402 rows

p.7 Table 4 packing, power rating, derating curve, rated voltage formula (rc0402fr-07102kl-datasheet.pdf, page 7)

p.7 Table 4 packing, power rating, derating curve, rated voltage formula

Mounting V.10 p.4 Fig. 4 and Table 1 reflow footprint dimensions (yageo-chip-resistors-mounting-v10.pdf, page 4)

Mounting V.10 p.4 Fig. 4 and Table 1 reflow footprint dimensions

CAD files

File What it is
RC0402FR-07102KL.kicad_sym KiCad symbol (standard resistor graphic) with MPN, Manufacturer, Mouser, DigiKey and LCSC fields
R_0402_1005Metric_RC0402FR-07102KL.kicad_mod KiCad footprint (KiCad library R_0402_1005Metric, renamed; model path ${KIPRJMOD}/RC0402FR-07102KL.step)
RC0402FR-07102KL.lbr Fusion / EAGLE library made from the KiCad symbol and footprint with adom-lbr generate (carries MPN, MANUFACTURER, MOUSER_PN, DIGIKEY_PN, LCSC_PN)
RC0402FR-07102KL.step 3D package model, STEP
package-reference.glb 3D package model, GLB, clean (board use)
rc0402fr-07102kl-hero.glb annotated hero GLB for the page viewer, with rc0402fr-07102kl-hero.overlay.json describing its artwork
altium/RC0402FR-07102KL.SchLib, altium/RC0402FR-07102KL.PcbLib Altium symbol and footprint libraries (native files from adom-lbr import-kicad and export-altium), with the hub file altium/RC0402FR-07102KL.adom-lbr.json
lod/ board-use GLBs in four levels of detail, with previews and manifest

Sources and license

Original Adom content is CC-BY-4.0. The KiCad footprint and 3D files keep their upstream license (CC-BY-SA 4.0 with the KiCad library exception) and the PDFs remain the publishers' documents; see LICENSE. provenance.json records every source and file hash; the scripts that built the checks are in provenance/tools/.

This is a catalog record for the part, not a manufacturing approval: check the maker's current datasheet for your design.