main
Ray
Publish 0.1.0
2bffec9
RBL06FTR030
TA-I Tech · Pre-Ordered RLCs · 0603
RBL06FTR030 from TA-I Tech, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | First terminal of the RB06 (0603) thin film chip resistor, one of two Sn-plated end electrodes (C = 0.30 ±0.20 mm), non-polarized and interchangeable with the other terminal. |
| 2 | 2 | passive | Second terminal of the RB06 (0603) thin film chip resistor, one of two Sn-plated end electrodes (C = 0.30 ±0.20 mm), non-polarized and interchangeable with the other terminal. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TA-I Tech |
| Package | 0603 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance (code F) | -1 | 1 | % | Tolerance code F = ±1.00% (part-number table) | 1 | ||
| Temperature coefficient of resistance (code R) | -100 | 100 | ppm/°C | Code R = ±100 ppm/°C; TCR measured +25 to +125 ℃ (section 6) | 1 | ||
| Power rating at 70℃ (1/10 W) | P | 0.1 | W | RB06 rated power at 70℃; derate above 70℃ per Figure 1 | 3 | ||
| Rated voltage (RB06) | E | 75 | V | E = P × R (section 5.2) | 3 | ||
| Max working voltage (RB06) | 150 | V | RB06 standard ratings table | 3 | |||
| Operating temperature | -55 | 155 | ℃ | Operating temp range as printed | 3 | ||
| Rapid change of temperature: resistance change | ΔR/R | -0.5 | 0.5 | % | -55℃(30 min)/+155℃(30 min), 300 cycles; limit printed ±(0.5%+0.05Ω) | 5 | |
| Short time overload: resistance change | ΔR/R | -0.5 | 0.5 | % | 2.5 × rated voltage for 5 sec; limit printed ±(0.5%+0.05Ω) | 5 | |
| Resistance to dry heat: resistance change | ΔR/R | -0.5 | 0.5 | % | 155±5℃ for 96±4 hrs; limit printed ±(0.5%+0.05Ω) | 5 | |
| Load life: resistance change | ΔR/R | -0.5 | 0.5 | % | 1000 hours at rated power, 70℃, 1.5 h ON / 0.5 h OFF; limit printed ±(0.5%+0.05Ω) | 5 | |
| Load life with humidity: resistance change | ΔR/R | -0.5 | 0.5 | % | 40±2℃/90~95% RH for 1000 hours, RCWV 1.5 h ON / 0.5 h OFF; limit printed ±(0.5%+0.05Ω) | 5 | |
| Resistance to solder heat: resistance change (≦0.25% initial) | ΔR/R | -0.25 | 0.25 | % | 260±5℃ solder, 10±1 sec dwell; limit ±(0.25%+0.05Ω) for initial change ≦0.25% | 5 | |
| Insulation resistance | IR | 1 | GΩ | Applying voltage 100V for 1 minute | 5 | ||
| Storage temperature | 5 | 35 | ℃ | Storage; humidity 40%~75% | 10 | ||
| Reflow peak temperature (Tp) | Tp | 260 | ℃ | Pb-free IR reflow profile, Sn96.5/Ag3/Cu0.5 solder; peak temperature MAX | 11 |
CAD (KiCad official)
- Symbol:
RBL06FTR030 - Footprint:
Inductor_SMD:L_0603_1608Metric - 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files:
rbl06ftr030-etched.step/rbl06ftr030-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rbl06ftr030.step/rbl06ftr030.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TA-I Tech datasheet (12 pp, sha256
20c24b6d60beb1da, retrieved 2026-11-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RBL06FTR030
**TA-I Tech** · Pre-Ordered RLCs · 0603
RBL06FTR030 from TA-I Tech, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | First terminal of the RB06 (0603) thin film chip resistor, one of two Sn-plated end electrodes (C = 0.30 ±0.20 mm), non-polarized and interchangeable with the other terminal. |
| 2 | 2 | passive | Second terminal of the RB06 (0603) thin film chip resistor, one of two Sn-plated end electrodes (C = 0.30 ±0.20 mm), non-polarized and interchangeable with the other terminal. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TA-I Tech |
| Package | 0603 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance (code F) | | -1 | | 1 | % | Tolerance code F = ±1.00% (part-number table) | 1 |
| Temperature coefficient of resistance (code R) | | -100 | | 100 | ppm/°C | Code R = ±100 ppm/°C; TCR measured +25 to +125 ℃ (section 6) | 1 |
| Power rating at 70℃ (1/10 W) | P | | | 0.1 | W | RB06 rated power at 70℃; derate above 70℃ per Figure 1 | 3 |
| Rated voltage (RB06) | E | | | 75 | V | E = P × R (section 5.2) | 3 |
| Max working voltage (RB06) | | | | 150 | V | RB06 standard ratings table | 3 |
| Operating temperature | | -55 | | 155 | ℃ | Operating temp range as printed | 3 |
| Rapid change of temperature: resistance change | ΔR/R | -0.5 | | 0.5 | % | -55℃(30 min)/+155℃(30 min), 300 cycles; limit printed ±(0.5%+0.05Ω) | 5 |
| Short time overload: resistance change | ΔR/R | -0.5 | | 0.5 | % | 2.5 × rated voltage for 5 sec; limit printed ±(0.5%+0.05Ω) | 5 |
| Resistance to dry heat: resistance change | ΔR/R | -0.5 | | 0.5 | % | 155±5℃ for 96±4 hrs; limit printed ±(0.5%+0.05Ω) | 5 |
| Load life: resistance change | ΔR/R | -0.5 | | 0.5 | % | 1000 hours at rated power, 70℃, 1.5 h ON / 0.5 h OFF; limit printed ±(0.5%+0.05Ω) | 5 |
| Load life with humidity: resistance change | ΔR/R | -0.5 | | 0.5 | % | 40±2℃/90~95% RH for 1000 hours, RCWV 1.5 h ON / 0.5 h OFF; limit printed ±(0.5%+0.05Ω) | 5 |
| Resistance to solder heat: resistance change (≦0.25% initial) | ΔR/R | -0.25 | | 0.25 | % | 260±5℃ solder, 10±1 sec dwell; limit ±(0.25%+0.05Ω) for initial change ≦0.25% | 5 |
| Insulation resistance | IR | 1 | | | GΩ | Applying voltage 100V for 1 minute | 5 |
| Storage temperature | | 5 | | 35 | ℃ | Storage; humidity 40%~75% | 10 |
| Reflow peak temperature (Tp) | Tp | | | 260 | ℃ | Pb-free IR reflow profile, Sn96.5/Ag3/Cu0.5 solder; peak temperature MAX | 11 |
## CAD (KiCad official)
- Symbol: `RBL06FTR030`
- Footprint: `Inductor_SMD:L_0603_1608Metric`
- 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files: `rbl06ftr030-etched.step` / `rbl06ftr030-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rbl06ftr030.step` / `rbl06ftr030.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TA-I Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757133596123774976) (12 pp, sha256 `20c24b6d60beb1da`, retrieved 2026-11-01, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/rbl06ftr030-datasheet.pdf)