main
Ray
Publish 0.1.0
fcee31c
RAA7881522GSP#AB0
RENESAS · Linear Voltage Regulators (LDO) · SOIC-8
RAA7881522GSP#AB0 from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: RO is high if A-B ≥ -50mV and low if A-B ≤ -200mV, and it is fail-safe high when A and B are unconnected (open) or shorted. |
| 2 | RE | input | Receiver output enable: RO is enabled when RE is low and is high impedance when RE is high. |
| 3 | DE | input | Driver output enable: the driver outputs Y and Z are enabled by bringing DE high and are high impedance when DE is low. |
| 4 | DI | input | Driver input: a low on DI forces output Y low and output Z high, and a high on DI forces output Y high and output Z low. |
| 5 | GND | power_in | Ground connection. |
| 6 | A/Y | bidirectional | Non-inverting receiver input and non-inverting driver output; the pin is an input when DE = 0 and an output when DE = 1. |
| 7 | B/Z | bidirectional | Inverting receiver input and inverting driver output; the pin is an input when DE = 0 and an output when DE = 1. |
| 8 | VCC | power_in | System power supply input, 4.5V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltages at DI, DE, RE | -0.3 | V | Max printed as VCC + 0.3 V | 5 | |||
| Bus I/O Voltages at A/Y, B/Z, A, B, Y, Z | -9 | 13 | V | 5 | |||
| Transient Pulse Voltages through 100Ω at A/Y, B/Z, A, B, Y, Z | -100 | 100 | V | Through 100Ω, TIA/EIA-485-A 4.2.6 (±100V for 15µs at 1% duty cycle) | 5 | ||
| RO output voltage | -0.3 | V | Max printed as VCC + 0.3 V | 5 | |||
| VCC to Ground | 7 | V | 5 | ||||
| Supply Voltage | VCC | 4.5 | 5.5 | V | 5 | ||
| Temperature Range | -40 | 85 | °C | 5 | |||
| Bus Pin Common-Mode Voltage Range | -7 | 12 | V | 5 | |||
| Maximum Junction Temperature (Plastic Package) | 150 | °C | 5 | ||||
| Maximum Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Driver Differential Output Voltage (RS-422 load) | VOD2 | 2.8 | 3.6 | V | RL = 100Ω (RS-422) (Figure 3) | 6 | |
| Driver Differential Output Voltage (RS-485 load) | VOD2 | 2.4 | 3.1 | V | RL = 54Ω (RS-485) (Figure 3) | 6 | |
| Driver Differential Output Voltage (loaded, common-mode range) | VOD2 | 2.4 | 3 | V | RL = 60Ω, -7V ≤ VCM ≤ 12V (Figure 4) | 6 | |
| Change in Magnitude of Driver Differential Output Voltage | ΔVOD | 0.01 | 0.2 | V | RL = 54Ω or 100Ω (Figure 3) | 6 | |
| Driver Common-Mode Output Voltage | VOC | 3.15 | V | RL = 54Ω or 100Ω (Figure 3) | 6 | ||
| Change in Magnitude of Driver Common-Mode Output Voltage | ΔVOC | 0.01 | 0.2 | V | RL = 54Ω or 100Ω (Figure 3) | 6 | |
| Logic Input High Voltage | VIH | 2 | V | DE, DI, RE | 6 | ||
| Logic Input Low Voltage | VIL | 0.8 | V | DE, DI, RE | 6 | ||
| Logic Input Current | IIN1 | -2 | 2 | µA | DE, DI, RE | 6 | |
| Input Current (A, B, A/Y, B/Z) | IIN2 | 70 | 125 | µA | DE = 0V, VCC = 0V or 5.5V; VIN = 12V | 6 | |
| Input Current (A, B, A/Y, B/Z) | IIN2 | -75 | µA | DE = 0V, VCC = 0V or 5.5V; VIN = -7V | 6 | ||
| Driver Short-Circuit Current, VO = High or Low | IOSD1 | -250 | 250 | mA | DE = VCC, -7V ≤ VY or VZ ≤ 12V (peak current) | 6 | |
| Receiver Differential Threshold Voltage | VTH | -200 | -90 | -50 | mV | -7V ≤ VCM ≤ 12V | 6 |
| Receiver Output High Voltage | VOH | 4.3 | V | IO = -8mA, VID = -50mV; min printed as VCC - 1.2 V | 6 | ||
| Receiver Output Low Voltage | VOL | 0.25 | 0.4 | V | IO = -8mA, VID = -200mV | 6 | |
| Receiver Output Low Current | IOL | 20 | 28 | mA | VO = 1V, VID = -200mV | 6 | |
| Three-State (High Impedance) Receiver Output Current | IOZR | -1 | 0.03 | 1 | µA | 0.4V ≤ VO ≤ 2.4V | 7 |
| Receiver Input Resistance | RIN | 96 | 160 | kΩ | -7V ≤ VCM ≤ 12V | 7 | |
| Receiver Short-Circuit Current | IOSR | -7 | 65 | 85 | mA | 0V ≤ VO ≤ VCC | 7 |
| No-Load Supply Current (half duplex versions) | ICC | 650 | 800 | µA | DE = VCC, RE = X, DI = 0V or VCC | 7 | |
| No-Load Supply Current (all versions, driver disabled) | ICC | 550 | 700 | µA | DE = 0V, RE = 0V | 7 | |
| Shutdown Supply Current | ISHDN | 0.07 | 3 | µA | DE = 0V, RE = VCC, DI = 0V or VCC | 7 | |
| EFT Immunity RS-485 Pins (5kHz) | -5 | 5 | kV | IEC61000-4-4 Electrical Fast Transient Immunity, 5kHz | 7 | ||
| EFT Immunity RS-485 Pins (100kHz) | -5 | 5 | kV | IEC61000-4-4 Electrical Fast Transient Immunity, 100kHz | 7 | ||
| ESD RS-485 Pins, Half Duplex Air-Gap Discharge | -16.5 | 16.5 | kV | IEC61000-4-2 Air-Gap Discharge, half duplex | 7 | ||
| ESD RS-485 Pins, IEC61000-4-2 Contact Discharge | -9 | 9 | kV | IEC61000-4-2 Contact Discharge Method | 7 | ||
| ESD RS-485 Pins, Human Body Model (bus pins to GND) | -16.5 | 16.5 | kV | Human Body Model, from bus pins to GND | 7 | ||
| ESD All Pins, Human Body Model | -7 | 7 | kV | Human Body Model per MIL-STD-883 Method 3015 | 7 | ||
| Driver Differential Output Delay | tPLH, tPHL | 500 | 970 | 1300 | ns | RDIFF = 54Ω, CL = 100pF (Figure 5); 115kbps versions | 7 |
| Driver Differential Output Skew | tSKEW | 12 | 50 | ns | RDIFF = 54Ω, CL = 100pF (Figure 5); 115kbps versions | 7 | |
| Driver Differential Rise or Fall Time | tR, tF | 700 | 1100 | 1600 | ns | RDIFF = 54Ω, CL = 100pF (Figure 5); 115kbps versions | 7 |
| Maximum Data Rate (driver, 115kbps) | fMAX | 115.2 | 2000 | kbps | CD = 820pF (Figure 7) | 7 | |
| Driver Enable to Output High (115kbps) | tZH | 300 | 600 | ns | RL = 500Ω, CL = 100pF, SW = GND (Figure 6) | 7 | |
| Driver Enable to Output Low (115kbps) | tZL | 130 | 500 | ns | RL = 500Ω, CL = 100pF, SW = VCC (Figure 6) | 8 | |
| Driver Disable from Output Low (115kbps) | tLZ | 50 | 65 | ns | RL = 500Ω, CL = 15pF, SW = VCC (Figure 6) | 8 | |
| Driver Disable from Output High (115kbps) | tHZ | 35 | 60 | ns | RL = 500Ω, CL = 15pF, SW = GND (Figure 6) | 8 | |
| Time to Shutdown | tSHDN | 60 | 160 | 600 | ns | Driver and receiver | 8 |
| Driver Enable from Shutdown to Output High | tZH(SHDN) | 250 | ns | RL = 500Ω, CL = 100pF, SW = GND (Figure 6) | 8 | ||
| Driver Enable from Shutdown to Output Low | tZL(SHDN) | 250 | ns | RL = 500Ω, CL = 100pF, SW = VCC (Figure 6) | 8 | ||
| Maximum Data Rate (receiver, 115kbps and 1Mbps versions) | fMAX | 1 | 12 | Mbps | Figure 8 | 9 | |
| Receiver Input to Output Delay | tPLH, tPHL | 100 | 150 | ns | Figure 8 | 9 | |
| Receiver Skew | tSKD | 4 | 10 | ns | / tPLH - tPHL / Figure 8 | 9 | |
| Receiver Enable to Output Low | tZL | 9 | 20 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 9) | 9 | |
| Receiver Enable to Output High | tZH | 7 | 20 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 9) | 9 | |
| Receiver Disable from Output Low | tLZ | 8 | 15 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 9) | 9 | |
| Receiver Disable from Output High | tHZ | 8 | 15 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 9) | 9 | |
| Receiver Enable from Shutdown to Output High | tZH(SHDN) | 200 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 9) | 10 | ||
| Receiver Enable from Shutdown to Output Low | tZL(SHDN) | 200 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 9) | 10 | ||
| Thermal Resistance θJA, 8 Ld SOIC | θJA | 105 | °C/W | Measured on high-effective thermal conductivity test board in free air | 5 |
CAD (KiCad official)
- Symbol:
RAA7881522GSP#AB0 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
raa7881522gsp-ab0-etched.step/raa7881522gsp-ab0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);raa7881522gsp-ab0.step/raa7881522gsp-ab0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (33 pp, sha256
108ae75d47993818, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed (audit)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RAA7881522GSP#AB0
**RENESAS** · Linear Voltage Regulators (LDO) · SOIC-8
RAA7881522GSP#AB0 from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: RO is high if A-B ≥ -50mV and low if A-B ≤ -200mV, and it is fail-safe high when A and B are unconnected (open) or shorted. |
| 2 | RE | input | Receiver output enable: RO is enabled when RE is low and is high impedance when RE is high. |
| 3 | DE | input | Driver output enable: the driver outputs Y and Z are enabled by bringing DE high and are high impedance when DE is low. |
| 4 | DI | input | Driver input: a low on DI forces output Y low and output Z high, and a high on DI forces output Y high and output Z low. |
| 5 | GND | power_in | Ground connection. |
| 6 | A/Y | bidirectional | Non-inverting receiver input and non-inverting driver output; the pin is an input when DE = 0 and an output when DE = 1. |
| 7 | B/Z | bidirectional | Inverting receiver input and inverting driver output; the pin is an input when DE = 0 and an output when DE = 1. |
| 8 | VCC | power_in | System power supply input, 4.5V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltages at DI, DE, RE | | -0.3 | | | V | Max printed as VCC + 0.3 V | 5 |
| Bus I/O Voltages at A/Y, B/Z, A, B, Y, Z | | -9 | | 13 | V | | 5 |
| Transient Pulse Voltages through 100Ω at A/Y, B/Z, A, B, Y, Z | | -100 | | 100 | V | Through 100Ω, TIA/EIA-485-A 4.2.6 (±100V for 15µs at 1% duty cycle) | 5 |
| RO output voltage | | -0.3 | | | V | Max printed as VCC + 0.3 V | 5 |
| VCC to Ground | | | | 7 | V | | 5 |
| Supply Voltage | VCC | 4.5 | | 5.5 | V | | 5 |
| Temperature Range | | -40 | | 85 | °C | | 5 |
| Bus Pin Common-Mode Voltage Range | | -7 | | 12 | V | | 5 |
| Maximum Junction Temperature (Plastic Package) | | | | 150 | °C | | 5 |
| Maximum Storage Temperature Range | | -65 | | 150 | °C | | 5 |
| Driver Differential Output Voltage (RS-422 load) | VOD2 | 2.8 | 3.6 | | V | RL = 100Ω (RS-422) (Figure 3) | 6 |
| Driver Differential Output Voltage (RS-485 load) | VOD2 | 2.4 | 3.1 | | V | RL = 54Ω (RS-485) (Figure 3) | 6 |
| Driver Differential Output Voltage (loaded, common-mode range) | VOD2 | 2.4 | 3 | | V | RL = 60Ω, -7V ≤ VCM ≤ 12V (Figure 4) | 6 |
| Change in Magnitude of Driver Differential Output Voltage | ΔVOD | | 0.01 | 0.2 | V | RL = 54Ω or 100Ω (Figure 3) | 6 |
| Driver Common-Mode Output Voltage | VOC | | | 3.15 | V | RL = 54Ω or 100Ω (Figure 3) | 6 |
| Change in Magnitude of Driver Common-Mode Output Voltage | ΔVOC | | 0.01 | 0.2 | V | RL = 54Ω or 100Ω (Figure 3) | 6 |
| Logic Input High Voltage | VIH | 2 | | | V | DE, DI, RE | 6 |
| Logic Input Low Voltage | VIL | | | 0.8 | V | DE, DI, RE | 6 |
| Logic Input Current | IIN1 | -2 | | 2 | µA | DE, DI, RE | 6 |
| Input Current (A, B, A/Y, B/Z) | IIN2 | | 70 | 125 | µA | DE = 0V, VCC = 0V or 5.5V; VIN = 12V | 6 |
| Input Current (A, B, A/Y, B/Z) | IIN2 | -75 | | | µA | DE = 0V, VCC = 0V or 5.5V; VIN = -7V | 6 |
| Driver Short-Circuit Current, VO = High or Low | IOSD1 | -250 | | 250 | mA | DE = VCC, -7V ≤ VY or VZ ≤ 12V (peak current) | 6 |
| Receiver Differential Threshold Voltage | VTH | -200 | -90 | -50 | mV | -7V ≤ VCM ≤ 12V | 6 |
| Receiver Output High Voltage | VOH | | 4.3 | | V | IO = -8mA, VID = -50mV; min printed as VCC - 1.2 V | 6 |
| Receiver Output Low Voltage | VOL | | 0.25 | 0.4 | V | IO = -8mA, VID = -200mV | 6 |
| Receiver Output Low Current | IOL | 20 | 28 | | mA | VO = 1V, VID = -200mV | 6 |
| Three-State (High Impedance) Receiver Output Current | IOZR | -1 | 0.03 | 1 | µA | 0.4V ≤ VO ≤ 2.4V | 7 |
| Receiver Input Resistance | RIN | 96 | 160 | | kΩ | -7V ≤ VCM ≤ 12V | 7 |
| Receiver Short-Circuit Current | IOSR | -7 | 65 | 85 | mA | 0V ≤ VO ≤ VCC | 7 |
| No-Load Supply Current (half duplex versions) | ICC | | 650 | 800 | µA | DE = VCC, RE = X, DI = 0V or VCC | 7 |
| No-Load Supply Current (all versions, driver disabled) | ICC | | 550 | 700 | µA | DE = 0V, RE = 0V | 7 |
| Shutdown Supply Current | ISHDN | | 0.07 | 3 | µA | DE = 0V, RE = VCC, DI = 0V or VCC | 7 |
| EFT Immunity RS-485 Pins (5kHz) | | -5 | | 5 | kV | IEC61000-4-4 Electrical Fast Transient Immunity, 5kHz | 7 |
| EFT Immunity RS-485 Pins (100kHz) | | -5 | | 5 | kV | IEC61000-4-4 Electrical Fast Transient Immunity, 100kHz | 7 |
| ESD RS-485 Pins, Half Duplex Air-Gap Discharge | | -16.5 | | 16.5 | kV | IEC61000-4-2 Air-Gap Discharge, half duplex | 7 |
| ESD RS-485 Pins, IEC61000-4-2 Contact Discharge | | -9 | | 9 | kV | IEC61000-4-2 Contact Discharge Method | 7 |
| ESD RS-485 Pins, Human Body Model (bus pins to GND) | | -16.5 | | 16.5 | kV | Human Body Model, from bus pins to GND | 7 |
| ESD All Pins, Human Body Model | | -7 | | 7 | kV | Human Body Model per MIL-STD-883 Method 3015 | 7 |
| Driver Differential Output Delay | tPLH, tPHL | 500 | 970 | 1300 | ns | RDIFF = 54Ω, CL = 100pF (Figure 5); 115kbps versions | 7 |
| Driver Differential Output Skew | tSKEW | | 12 | 50 | ns | RDIFF = 54Ω, CL = 100pF (Figure 5); 115kbps versions | 7 |
| Driver Differential Rise or Fall Time | tR, tF | 700 | 1100 | 1600 | ns | RDIFF = 54Ω, CL = 100pF (Figure 5); 115kbps versions | 7 |
| Maximum Data Rate (driver, 115kbps) | fMAX | 115.2 | 2000 | | kbps | CD = 820pF (Figure 7) | 7 |
| Driver Enable to Output High (115kbps) | tZH | | 300 | 600 | ns | RL = 500Ω, CL = 100pF, SW = GND (Figure 6) | 7 |
| Driver Enable to Output Low (115kbps) | tZL | | 130 | 500 | ns | RL = 500Ω, CL = 100pF, SW = VCC (Figure 6) | 8 |
| Driver Disable from Output Low (115kbps) | tLZ | | 50 | 65 | ns | RL = 500Ω, CL = 15pF, SW = VCC (Figure 6) | 8 |
| Driver Disable from Output High (115kbps) | tHZ | | 35 | 60 | ns | RL = 500Ω, CL = 15pF, SW = GND (Figure 6) | 8 |
| Time to Shutdown | tSHDN | 60 | 160 | 600 | ns | Driver and receiver | 8 |
| Driver Enable from Shutdown to Output High | tZH(SHDN) | | | 250 | ns | RL = 500Ω, CL = 100pF, SW = GND (Figure 6) | 8 |
| Driver Enable from Shutdown to Output Low | tZL(SHDN) | | | 250 | ns | RL = 500Ω, CL = 100pF, SW = VCC (Figure 6) | 8 |
| Maximum Data Rate (receiver, 115kbps and 1Mbps versions) | fMAX | 1 | 12 | | Mbps | Figure 8 | 9 |
| Receiver Input to Output Delay | tPLH, tPHL | | 100 | 150 | ns | Figure 8 | 9 |
| Receiver Skew | tSKD | | 4 | 10 | ns | / tPLH - tPHL / Figure 8 | 9 |
| Receiver Enable to Output Low | tZL | | 9 | 20 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 9) | 9 |
| Receiver Enable to Output High | tZH | | 7 | 20 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 9) | 9 |
| Receiver Disable from Output Low | tLZ | | 8 | 15 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 9) | 9 |
| Receiver Disable from Output High | tHZ | | 8 | 15 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 9) | 9 |
| Receiver Enable from Shutdown to Output High | tZH(SHDN) | | | 200 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 9) | 10 |
| Receiver Enable from Shutdown to Output Low | tZL(SHDN) | | | 200 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 9) | 10 |
| Thermal Resistance θJA, 8 Ld SOIC | θJA | | 105 | | °C/W | Measured on high-effective thermal conductivity test board in free air | 5 |
## CAD (KiCad official)
- Symbol: `RAA7881522GSP#AB0`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `raa7881522gsp-ab0-etched.step` / `raa7881522gsp-ab0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `raa7881522gsp-ab0.step` / `raa7881522gsp-ab0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/raa7881522gsp-ab0-datasheet.pdf) (33 pp, sha256 `108ae75d47993818`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed (audit)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/raa7881522gsp-ab0-datasheet.pdf)