component
RAA270000KFT#HA2
Public Made by Adomby adom
RENESAS New Arrivals, QFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532
{
"slug": "raa270000kft-ha2",
"version": "0.1.0",
"type": "component",
"description": "RENESAS New Arrivals, QFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"others",
"raa270000kft#ha2",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"raa270000kft-ha2.kicad_sym",
"raa270000kft-ha2.kicad_mod",
"raa270000kft-ha2.glb",
"raa270000kft-ha2.step",
"raa270000kft-ha2.lbr",
"docs/hero.png",
"docs/raa270000kft-ha2-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"raa270000kft-ha2-hero.glb",
"raa270000kft-ha2-hero.overlay.json",
"raa270000kft-ha2-etched.glb"
],
"component": {
"mpn": "RAA270000KFT#HA2",
"manufacturer": "RENESAS",
"package": "QFP-64(10x10)",
"pin_count": 64,
"category": "Others",
"subcategory": "New Arrivals",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/db91be2e330056e1ac8174fe97cd6279.pdf",
"parts": {
"symbol": "raa270000kft-ha2.kicad_sym",
"footprint": "raa270000kft-ha2.kicad_mod",
"model_3d": "raa270000kft-ha2-hero.glb",
"model_3d_plain": "raa270000kft-ha2-etched.glb",
"model_3d_step": "raa270000kft-ha2-etched.step",
"model_3d_step_plain": "raa270000kft-ha2.step",
"lbr": "raa270000kft-ha2.lbr"
},
"distributor_links": {
"lcsc": "C7037813",
"digikey": "559-RAA270000KFT#HA2TR-ND",
"mouser": "968-RAA270000KFT#HA2"
},
"distributor_check": {
"checked_at": "2026-11-02T17:32:15Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "559-RAA270000KFT#HA2TR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "968-RAA270000KFT#HA2",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "TEST1",
"type": "input",
"description": "For test; it should be connected to ground."
},
{
"number": "2",
"name": "EN0",
"type": "input",
"description": "Power enable of the PMIC (High enables the PMIC, Low disables it); the input high level is at least 2.5V."
},
{
"number": "3",
"name": "TEST2",
"type": "input",
"description": "For test; it should be connected to ground."
},
{
"number": "4",
"name": "LDO0EN",
"type": "input",
"description": "Power enable of LDO0 without EN0 or EN1 (High enables LDO0, Low disables LDO0)."
},
{
"number": "5",
"name": "EN1",
"type": "input",
"description": "Power enable of the PMIC (High enables the PMIC, Low disables it); the input high level is at least 2.5V."
},
{
"number": "6",
"name": "VINR",
"type": "power_in",
"description": "Battery input supply for LDO0; input range is 6.0V to 18.5V for specified characteristics."
},
{
"number": "7",
"name": "N.C",
"type": "unconnected",
"description": "Not connected."
},
{
"number": "8",
"name": "N.C",
"type": "unconnected",
"description": "Not connected."
},
{
"number": "9",
"name": "VINPDC1A",
"type": "power_in",
"description": "Power supply for DCDC1; input range is 6.0V to 18.5V."
},
{
"number": "10",
"name": "VINPDC1B",
"type": "power_in",
"description": "Power supply for DCDC1; input range is 6.0V to 18.5V."
},
{
"number": "11",
"name": "N.C",
"type": "unconnected",
"description": "Not connected."
},
{
"number": "12",
"name": "LX1A",
"type": "output",
"description": "DCDC1 inductor driver output; absolute range is -1.0V to VINPDC1A/B+0.3V."
},
{
"number": "13",
"name": "LX1B",
"type": "output",
"description": "DCDC1 inductor driver output; absolute range is -1.0V to VINPDC1A/B+0.3V."
},
{
"number": "14",
"name": "PGND1",
"type": "power_in",
"description": "Power ground; PGND1 and AGND1 are connected inside the PMIC."
},
{
"number": "15",
"name": "FBDC1",
"type": "input",
"description": "DCDC1 feedback from VD1; absolute maximum is -0.3V to 19V."
},
{
"number": "16",
"name": "ERROR1",
"type": "input",
"description": "Input for the microcontroller safety monitor signal; high level is at least 0.7*VIN3V."
},
{
"number": "17",
"name": "ERROR2",
"type": "input",
"description": "Input for the microcontroller safety monitor signal; high level is at least 0.7*VIN3V."
},
{
"number": "18",
"name": "N.C",
"type": "unconnected",
"description": "Not connected."
},
{
"number": "19",
"name": "VINPDC2A",
"type": "power_in",
"description": "Power supply for DCDC2; LDO power line range is 5.4V to 6.0V."
},
{
"number": "20",
"name": "VINPDC2B",
"type": "power_in",
"description": "Power supply for DCDC2; LDO power line range is 5.4V to 6.0V."
},
{
"number": "21",
"name": "N.C",
"type": "unconnected",
"description": "Not connected."
},
{
"number": "22",
"name": "LX2A",
"type": "output",
"description": "DCDC2 inductor driver output; absolute range is -1.0V to VINPDC2A/B+0.3V."
},
{
"number": "23",
"name": "LX2B",
"type": "output",
"description": "DCDC2 inductor driver output; absolute range is -1.0V to VINPDC2A/B+0.3V."
},
{
"number": "24",
"name": "PGND2",
"type": "power_in",
"description": "Power ground; PGND2 and AGND2 are connected inside the PMIC."
},
{
"number": "25",
"name": "FBDC2A",
"type": "input",
"description": "DCDC2 feedback from VD2; absolute maximum is -0.3V to 19V."
},
{
"number": "26",
"name": "FBDC2B",
"type": "input",
"description": "DCDC2 feedback from VD2; absolute maximum is -0.3V to 19V."
},
{
"number": "27",
"name": "N.C",
"type": "unconnected",
"description": "Not connected."
},
{
"number": "28",
"name": "WDI",
"type": "input",
"description": "Clears the watchdog timer; input low level is at most 0.3*VDDIO."
},
{
"number": "29",
"name": "WDENB",
"type": "input",
"description": "Watchdog enable input; WDT runs when set low during P/U sequence."
},
{
"number": "30",
"name": "RSTB",
"type": "output",
"description": "Reset output (open drain); requires a pull-up resistor of at least 3.3kOhm, low level at most 0.4V at 2mA."
},
{
"number": "31",
"name": "INTOUT",
"type": "output",
"description": "Interrupt signal output; asserted low when an interrupt factor occurs."
},
{
"number": "32",
"name": "SUSP",
"type": "output",
"description": "Low voltage indicator of LDO1; asserted low when VOUT1 falls below Vd1l1 (4.625V typ)."
},
{
"number": "33",
"name": "VINP2",
"type": "power_in",
"description": "Power supply for LDO2; LDO power line range is 5.4V to 6.0V."
},
{
"number": "34",
"name": "N.C",
"type": "unconnected",
"description": "Not connected."
},
{
"number": "35",
"name": "VOUT2",
"type": "power_out",
"description": "LDO2 output, 3.3V typical, 160mA maximum."
},
{
"number": "36",
"name": "VOUT1",
"type": "power_out",
"description": "LDO1 output, 5.0V typical, 300mA maximum."
},
{
"number": "37",
"name": "N.C",
"type": "unconnected",
"description": "Not connected."
},
{
"number": "38",
"name": "VINP1",
"type": "power_in",
"description": "Power supply for LDO1; LDO power line range is 5.4V to 6.0V."
},
{
"number": "39",
"name": "VADC",
"type": "power_out",
"description": "LDOAD output for the microcontroller ADC, 5.0V typical, 60mA maximum."
},
{
"number": "40",
"name": "AGND1",
"type": "power_in",
"description": "Analog ground; AGND1 and AGND2 are connected inside the PMIC."
},
{
"number": "41",
"name": "TREF1",
"type": "input",
"description": "Input reference for TRACK1; the output tracks this input."
},
{
"number": "42",
"name": "VTRQ1",
"type": "power_out",
"description": "TRACK1 output, tracking the TREF1 input, 150mA maximum."
},
{
"number": "43",
"name": "VINPTRQ1",
"type": "power_in",
"description": "Power supply for TRACK1; LDO power line range is 5.4V to 6.0V."
},
{
"number": "44",
"name": "N.C",
"type": "unconnected",
"description": "Not connected."
},
{
"number": "45",
"name": "VINPTRQ2",
"type": "power_in",
"description": "Power supply for TRACK2; LDO power line range is 5.4V to 6.0V."
},
{
"number": "46",
"name": "VTRQ2",
"type": "power_out",
"description": "TRACK2 output, tracking the TREF2 input, 150mA maximum."
},
{
"number": "47",
"name": "TREF2",
"type": "input",
"description": "Input reference for TRACK2; the output tracks this input."
},
{
"number": "48",
"name": "BUFAD",
"type": "output",
"description": "Voltage reference output (1.2V typical) for LDO1 and LDOAD; 0.1uF capacitor to ground recommended."
},
{
"number": "49",
"name": "MUXOUT",
"type": "output",
"description": "Analog multiplexer output of internal analog voltages for ADC monitoring."
},
{
"number": "50",
"name": "N.C",
"type": "unconnected",
"description": "Not connected."
},
{
"number": "51",
"name": "SPISDO",
"type": "output",
"description": "Serial interface data output; requires a pull-up of at least 10kOhm to VOUT1."
},
{
"number": "52",
"name": "SPICLK",
"type": "input",
"description": "Serial interface clock input; clock period at least 800ns."
},
{
"number": "53",
"name": "SPISDI",
"type": "input",
"description": "Serial interface data input."
},
{
"number": "54",
"name": "SPICSB",
"type": "input",
"description": "Serial interface chip select input (active low); high width at least 2800ns."
},
{
"number": "55",
"name": "VDDIO",
"type": "power_in",
"description": "Power supply for I/O of the PMIC; range is 4.5V to 5.5V."
},
{
"number": "56",
"name": "AGND2",
"type": "power_in",
"description": "Analog ground; AGND1 and AGND2 are connected inside the PMIC."
},
{
"number": "57",
"name": "FSOUT",
"type": "output",
"description": "Specified digital output for safety management; low when RSTB is low or an ERROR indication occurs."
},
{
"number": "58",
"name": "EXCNT",
"type": "output",
"description": "Specified digital output for external control; set high after WDT starts and low on reset."
},
{
"number": "59",
"name": "N.C",
"type": "unconnected",
"description": "Not connected."
},
{
"number": "60",
"name": "VOUT0SW",
"type": "power_out",
"description": "LDO0 output through an internal switch for microcontroller retention area; switch resistance is at most 8 Ohm."
},
{
"number": "61",
"name": "VIN3V",
"type": "power_in",
"description": "Circuit power supply; range is 3.0V to 3.6V (3.3V typical)."
},
{
"number": "62",
"name": "N.C",
"type": "unconnected",
"description": "Not connected."
},
{
"number": "63",
"name": "VOUT0",
"type": "power_out",
"description": "LDO0 output, 3.3V typical, 10mA maximum; used as internal circuit supply."
},
{
"number": "64",
"name": "N.C",
"type": "unconnected",
"description": "Not connected."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Package mismatch: the hint says QFP-64(10x10), but the datasheet describes a 64-pin QFP with 12mm x ; MPN suffix mismatch: the datasheet names RAA270000KFT and RAA270000KFT#BA2 only. The #HA2 ordering v; Pin table on pages 6-8 is garbled in the text extraction. Pin numbers and names were aligned from th",
"31/64 pins cited to the wrong page (name found elsewhere): ['9:VINPDC1A@p6', '10:VINPDC1B@p6', '11:N.C@p6', '12:LX1A@p6']"
],
"pages_sent": 68,
"cost_usd": 0.0631,
"at": "2026-11-02T17:31:55"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/db91be2e330056e1ac8174fe97cd6279.pdf",
"pages": 68,
"sha256": "8d20faf7a29d978f",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 64,
"described": 64,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "raa270000kft-ha2.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
12.0,
12.0,
1.5
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "raa270000kft-ha2-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
12.0,
12.0,
1.5
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "6d5d23403aa04b0cd93e02f9e47a37e7fa751dab0370a50466b29192baf24127",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}