main
Ray
Publish 0.1.0
453a4b8
R7FA2E1A73CFJ#AA0
RENESAS · Microcontroller Units (MCUs/MPUs/SOCs) · QFP-32(7x7)
R7FA2E1A73CFJ#AA0 from RENESAS, in a QFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCL | passive | Connect this pin to VSS through the smoothing capacitor used to stabilize the internal power supply, placed close to the pin. |
| 2 | P215/XCIN | input | Sub-clock oscillator input pin; connect a crystal resonator between XCOUT and XCIN, or use the pin as a general-purpose input. |
| 3 | P214/XCOUT | output | Sub-clock oscillator output pin; connect a crystal resonator between XCOUT and XCIN. |
| 4 | VSS | power_in | Ground pin; connect to the system power supply at 0 V. |
| 5 | P213/XTAL | output | Crystal resonator output pin for the main clock oscillator. |
| 6 | P212/EXTAL | input | Crystal resonator input pin; an external clock signal can be input through this pin. |
| 7 | VCC | power_in | Power supply pin; connect to the system supply and to VSS with a 0.1-µF capacitor placed close to the pin. Operating voltage is 1.6 to 5.5 V. |
| 8 | P407 | bidirectional | General-purpose input/output pin, also multiplexed with AGT, RTC and SCI functions; 5-V tolerant. |
| 9 | P914 | bidirectional | General-purpose input/output pin, also multiplexed with AGT and GPT functions. |
| 10 | P913 | bidirectional | General-purpose input/output pin, also multiplexed with AGT and GPT functions. |
| 11 | P208 | bidirectional | General-purpose input/output pin, also multiplexed with AGT function; 5-V tolerant. |
| 12 | P207 | bidirectional | General-purpose input/output pin; 5-V tolerant. |
| 13 | RES | input | Reset signal input pin; the MCU enters the reset state when this signal goes low. |
| 14 | P201/MD | input | Operating mode control pin; its signal level must not be changed during operating mode transition on release from the reset state. |
| 15 | P200 | input | General-purpose input pin, also used as the non-maskable interrupt pin NMI. |
| 16 | P300/SWCLK | input | Serial wire clock pin for on-chip debug; general-purpose I/O otherwise. |
| 17 | P108/SWDIO | bidirectional | Serial wire debug data input/output pin for on-chip debug. |
| 18 | P109 | bidirectional | General-purpose input/output pin, also usable as clock output CLKOUT_B. |
| 19 | P110 | bidirectional | General-purpose input/output pin, also multiplexed with GPT and SCI functions. |
| 20 | P112 | bidirectional | General-purpose input/output pin, also multiplexed with AGT, GPT and SCI functions. |
| 21 | P103 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN019, ACMPLP and SCI functions. |
| 22 | P102 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN020 and ACMPLP functions. |
| 23 | P101 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN021 and ACMPLP functions. |
| 24 | P100 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN022 and ACMPLP functions. |
| 25 | P015 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN010; 5-V tolerant, input range limited by AVCC0. |
| 26 | P014 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN009; 5-V tolerant, input range limited by AVCC0. |
| 27 | P013 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN008; 5-V tolerant, input range limited by AVCC0. |
| 28 | P012 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN007; 5-V tolerant, input range limited by AVCC0. |
| 29 | AVCC0 | power_in | Analog power supply pin for the ADC12; connect to the analog supply within the 1.6 to 5.5 V operating range. |
| 30 | AVSS0 | power_in | Analog ground pin for the ADC12; connect to 0 V. |
| 31 | P011/VREFL0 | power_in | Analog reference ground pin for the ADC12; connect to AVSS0 when the ADC12 is not used. Also usable as general-purpose I/O P011. |
| 32 | P010/VREFH0 | power_in | Analog reference voltage supply pin for the ADC12; connect to AVCC0 when the ADC12 is not used. Also usable as general-purpose I/O P010. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | QFP-32(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.5 | 6.5 | V | 24 | ||
| Input voltage, 5V-tolerant ports | Vin | -0.3 | 6.5 | V | 5V-tolerant ports (P400, P401, P407) | 24 | |
| Input voltage, other ports | Vin | -0.3 | V | Others: printed as -0.3 to VCC + 0.3 V | 24 | ||
| Reference power supply voltage | VREFH0 | -0.3 | 6.5 | V | 24 | ||
| Analog power supply voltage | AVCC0 | -0.5 | 6.5 | V | 24 | ||
| Operating temperature | Topr | -40 | 85 | °C | Upper limit is 85 or 105 °C depending on product (Notes 2-4) | 24 | |
| Storage temperature | Tstg | -55 | 125 | °C | 25 | ||
| Power supply voltage | VCC | 1.6 | 5.5 | V | 25 | ||
| Analog power supply voltage | AVCC0 | 1.6 | 5.5 | V | AVCC0 = VCC | 25 | |
| Reference voltage when used as ADC12 reference | VREFH0 | 1.6 | V | Max printed as AVCC0 | 25 | ||
| Thermal resistance junction-to-ambient, 32-pin LQFP | θja | 60.9 | °C/W | 37 | |||
| Thermal resistance junction-to-top center case, 32-pin LQFP | Ψjt | 2.5 | °C/W | 37 | |||
| Permissible output current per pin, other output pins (IOL) | IOL | 20 | mA | Max value per pin; duty factor ≤70% | 27 | ||
| Permissible output current per pin, other output pins (IOH) | IOH | -4 | mA | Max value per pin; duty factor ≤70% | 27 | ||
| Input pull-up resistor | RU | 10 | 20 | 100 | kΩ | Vin = 0 V; all ports except P200, P214, P215 | 32 |
| High-speed on-chip oscillator frequency (48 MHz) | fHOCO48 | 47.52 | 48 | 48.48 | MHz | Ta = -40 to 105°C, 1.6 ≤ VCC ≤ 5.5 | 39 |
| Operating current, high-speed mode, all peripheral clocks enabled | ICC | 13 | mA | ICLK = 48 MHz, code executing from flash, VCC = 3.3 V typ | 33 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminal material (Pb-free) A: Sn (Tin) only | 7 |
CAD (KiCad official)
- Symbol:
R7FA2E1A73CFJ#AA0 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: QFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
r7fa2e1a73cfj-aa0-etched.step/r7fa2e1a73cfj-aa0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r7fa2e1a73cfj-aa0.step/r7fa2e1a73cfj-aa0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (121 pp, sha256
9f16441e2434196a, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# R7FA2E1A73CFJ#AA0
**RENESAS** · Microcontroller Units (MCUs/MPUs/SOCs) · QFP-32(7x7)
R7FA2E1A73CFJ#AA0 from RENESAS, in a QFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCL | passive | Connect this pin to VSS through the smoothing capacitor used to stabilize the internal power supply, placed close to the pin. |
| 2 | P215/XCIN | input | Sub-clock oscillator input pin; connect a crystal resonator between XCOUT and XCIN, or use the pin as a general-purpose input. |
| 3 | P214/XCOUT | output | Sub-clock oscillator output pin; connect a crystal resonator between XCOUT and XCIN. |
| 4 | VSS | power_in | Ground pin; connect to the system power supply at 0 V. |
| 5 | P213/XTAL | output | Crystal resonator output pin for the main clock oscillator. |
| 6 | P212/EXTAL | input | Crystal resonator input pin; an external clock signal can be input through this pin. |
| 7 | VCC | power_in | Power supply pin; connect to the system supply and to VSS with a 0.1-µF capacitor placed close to the pin. Operating voltage is 1.6 to 5.5 V. |
| 8 | P407 | bidirectional | General-purpose input/output pin, also multiplexed with AGT, RTC and SCI functions; 5-V tolerant. |
| 9 | P914 | bidirectional | General-purpose input/output pin, also multiplexed with AGT and GPT functions. |
| 10 | P913 | bidirectional | General-purpose input/output pin, also multiplexed with AGT and GPT functions. |
| 11 | P208 | bidirectional | General-purpose input/output pin, also multiplexed with AGT function; 5-V tolerant. |
| 12 | P207 | bidirectional | General-purpose input/output pin; 5-V tolerant. |
| 13 | RES | input | Reset signal input pin; the MCU enters the reset state when this signal goes low. |
| 14 | P201/MD | input | Operating mode control pin; its signal level must not be changed during operating mode transition on release from the reset state. |
| 15 | P200 | input | General-purpose input pin, also used as the non-maskable interrupt pin NMI. |
| 16 | P300/SWCLK | input | Serial wire clock pin for on-chip debug; general-purpose I/O otherwise. |
| 17 | P108/SWDIO | bidirectional | Serial wire debug data input/output pin for on-chip debug. |
| 18 | P109 | bidirectional | General-purpose input/output pin, also usable as clock output CLKOUT_B. |
| 19 | P110 | bidirectional | General-purpose input/output pin, also multiplexed with GPT and SCI functions. |
| 20 | P112 | bidirectional | General-purpose input/output pin, also multiplexed with AGT, GPT and SCI functions. |
| 21 | P103 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN019, ACMPLP and SCI functions. |
| 22 | P102 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN020 and ACMPLP functions. |
| 23 | P101 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN021 and ACMPLP functions. |
| 24 | P100 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN022 and ACMPLP functions. |
| 25 | P015 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN010; 5-V tolerant, input range limited by AVCC0. |
| 26 | P014 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN009; 5-V tolerant, input range limited by AVCC0. |
| 27 | P013 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN008; 5-V tolerant, input range limited by AVCC0. |
| 28 | P012 | bidirectional | General-purpose input/output pin, also multiplexed with ADC12 analog input AN007; 5-V tolerant, input range limited by AVCC0. |
| 29 | AVCC0 | power_in | Analog power supply pin for the ADC12; connect to the analog supply within the 1.6 to 5.5 V operating range. |
| 30 | AVSS0 | power_in | Analog ground pin for the ADC12; connect to 0 V. |
| 31 | P011/VREFL0 | power_in | Analog reference ground pin for the ADC12; connect to AVSS0 when the ADC12 is not used. Also usable as general-purpose I/O P011. |
| 32 | P010/VREFH0 | power_in | Analog reference voltage supply pin for the ADC12; connect to AVCC0 when the ADC12 is not used. Also usable as general-purpose I/O P010. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | QFP-32(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 32 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.5 | | 6.5 | V | | 24 |
| Input voltage, 5V-tolerant ports | Vin | -0.3 | | 6.5 | V | 5V-tolerant ports (P400, P401, P407) | 24 |
| Input voltage, other ports | Vin | -0.3 | | | V | Others: printed as -0.3 to VCC + 0.3 V | 24 |
| Reference power supply voltage | VREFH0 | -0.3 | | 6.5 | V | | 24 |
| Analog power supply voltage | AVCC0 | -0.5 | | 6.5 | V | | 24 |
| Operating temperature | Topr | -40 | | 85 | °C | Upper limit is 85 or 105 °C depending on product (Notes 2-4) | 24 |
| Storage temperature | Tstg | -55 | | 125 | °C | | 25 |
| Power supply voltage | VCC | 1.6 | | 5.5 | V | | 25 |
| Analog power supply voltage | AVCC0 | 1.6 | | 5.5 | V | AVCC0 = VCC | 25 |
| Reference voltage when used as ADC12 reference | VREFH0 | 1.6 | | | V | Max printed as AVCC0 | 25 |
| Thermal resistance junction-to-ambient, 32-pin LQFP | θja | | 60.9 | | °C/W | | 37 |
| Thermal resistance junction-to-top center case, 32-pin LQFP | Ψjt | | 2.5 | | °C/W | | 37 |
| Permissible output current per pin, other output pins (IOL) | IOL | | | 20 | mA | Max value per pin; duty factor ≤70% | 27 |
| Permissible output current per pin, other output pins (IOH) | IOH | | | -4 | mA | Max value per pin; duty factor ≤70% | 27 |
| Input pull-up resistor | RU | 10 | 20 | 100 | kΩ | Vin = 0 V; all ports except P200, P214, P215 | 32 |
| High-speed on-chip oscillator frequency (48 MHz) | fHOCO48 | 47.52 | 48 | 48.48 | MHz | Ta = -40 to 105°C, 1.6 ≤ VCC ≤ 5.5 | 39 |
| Operating current, high-speed mode, all peripheral clocks enabled | ICC | | | 13 | mA | ICLK = 48 MHz, code executing from flash, VCC = 3.3 V typ | 33 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminal material (Pb-free) A: Sn (Tin) only | 7 |
## CAD (KiCad official)
- Symbol: `R7FA2E1A73CFJ#AA0`
- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`
- 3D model: QFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files: `r7fa2e1a73cfj-aa0-etched.step` / `r7fa2e1a73cfj-aa0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `r7fa2e1a73cfj-aa0.step` / `r7fa2e1a73cfj-aa0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](https://www.renesas.com/us/en/document/dst/ra2e1-group-datasheet) (121 pp, sha256 `9f16441e2434196a`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/r7fa2e1a73cfj-aa0-datasheet.pdf)