Generated by kicad-footprint-generator · KiCad file format 20260206
R7FA2E1A52DFJ#AA0
RENESAS · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-32(7x7)
R7FA2E1A52DFJ#AA0 from RENESAS, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCL | passive | Connect this pin to the VSS pin by the smoothing capacitor used to stabilize the internal power supply. |
| 2 | P215/XCIN | input | Input-only general-purpose pin P215, also the sub-clock oscillator input XCIN, with a crystal resonator connected between XCOUT and XCIN. |
| 3 | P214/XCOUT | output | Sub-clock oscillator output XCOUT for the crystal resonator connected between XCOUT and XCIN; P214 is an input-only general-purpose pin. |
| 4 | VSS | power_in | Ground pin. Connect it to the system power supply (0 V). |
| 5 | P213/XTAL | output | Output pin for the crystal resonator (XTAL); P213 is also a general-purpose input/output pin. |
| 6 | P212/EXTAL | input | External clock input EXTAL, through which an external clock signal can be input; P212 is also a general-purpose input/output pin. |
| 7 | VCC | power_in | Power supply pin for an operating VCC range of 1.6 to 5.5 V; connect it to the system power supply and to VSS by a 0.1-µF capacitor placed close to the pin. |
| 8 | P407 | bidirectional | General-purpose input/output pin P407, also used for AGTIO0_C, RTCOUT, SDA0_B and ADTRG0_B functions. |
| 9 | P914 | bidirectional | General-purpose input/output pin P914, also used for AGTOA1_A and GTETRGB_F functions. |
| 10 | P913 | bidirectional | General-purpose input/output pin P913, also used for AGTIO1_F and GTETRGA_F functions. |
| 11 | P208 | bidirectional | General-purpose input/output pin P208, also used for the AGTOB0_A function. |
| 12 | P207 | bidirectional | General-purpose input/output pin P207 with no alternate function listed for this package. |
| 13 | RES | input | Reset signal input pin; the MCU enters the reset state when this signal goes low. |
| 14 | P201/MD | input | Operating mode control pin MD, whose signal level must not be changed during operation mode transition on release from the reset state; P201 is also a general-purpose input/output pin. |
| 15 | P200 | input | General-purpose input-only pin P200, also used as the non-maskable interrupt request input NMI. |
| 16 | P300/SWCLK | input | Serial wire clock pin SWCLK for on-chip debug; P300 is also a general-purpose input/output pin. |
| 17 | P108/SWDIO | bidirectional | Serial wire debug data input/output pin SWDIO; P108 is also a general-purpose input/output pin. |
| 18 | P109 | bidirectional | General-purpose input/output pin P109, also used for the CLKOUT_B clock output function. |
| 19 | P110 | bidirectional | General-purpose input/output pin P110, also used for the GTOVLO_A and VCOUT-related alternate functions listed for this pin. |
| 20 | P112 | bidirectional | General-purpose input/output pin P112, also used for the AGTOB0 function and the TSCAP touch driver secondary power supply function. |
| 21 | P103 | bidirectional | General-purpose input/output pin P103, also used for the ADC12 analog input AN019, the CMPREF1 reference input and the KR03 key interrupt input. |
| 22 | P102 | bidirectional | General-purpose input/output pin P102, also used for the ADC12 analog input AN020, the CMPIN1 analog input and the KR02 key interrupt input. |
| 23 | P101 | bidirectional | General-purpose input/output pin P101, also used for the ADC12 analog input AN021, the CMPREF0 reference input and the KR01 key interrupt input. |
| 24 | P100 | bidirectional | General-purpose input/output pin P100, also used for the ADC12 analog input AN022, the CMPIN0 analog input and the KR00 key interrupt input. |
| 25 | P015 | bidirectional | General-purpose input/output pin P015, also an ADC12 high-precision analog input AN010. |
| 26 | P014 | bidirectional | General-purpose input/output pin P014, also an ADC12 analog input AN009. |
| 27 | P013 | bidirectional | General-purpose input/output pin P013, also an ADC12 analog input AN008. |
| 28 | P012 | bidirectional | General-purpose input/output pin P012, also an ADC12 analog input AN007. |
| 29 | AVCC0 | power_in | Analog power supply pin for the ADC12; connect VREFH0 to AVCC0 when the ADC12 is not used. |
| 30 | AVSS0 | power_in | Analog ground pin for the ADC12; connect VREFL0 to AVSS0 when the ADC12 is not used. |
| 31 | P011/VREFL0 | input | Analog reference ground pin VREFL0 for the ADC12, connected to AVSS0 when the ADC12 is not used; P011 is also a general-purpose I/O pin. |
| 32 | P010/VREFH0 | input | Analog reference voltage supply pin VREFH0 for the ADC12, connected to AVCC0 when the ADC12 is not used; P010 is also a general-purpose I/O pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-32(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.5 | 6.5 | V | 24 | ||
| Input voltage 5V-tolerant ports | Vin | -0.3 | 6.5 | V | 24 | ||
| Analog power supply voltage | AVCC0 | -0.5 | 6.5 | V | 24 | ||
| Reference power supply voltage | VREFH0 | -0.3 | 6.5 | V | 24 | ||
| Operating temperature | Topr | -40 | 85 | °C | 85°C product grade | 24 | |
| Operating temperature | Topr | -40 | 105 | °C | 105°C product grade | 24 | |
| Storage temperature | Tstg | -55 | 125 | °C | 25 | ||
| Power supply voltages | VCC | 1.6 | 5.5 | V | 25 | ||
| Analog power supply voltages | AVCC0 | 1.6 | 5.5 | V | 25 | ||
| External capacitance for stabilizing connected to TSCAP pin | CTSCAP | 10 | nF | VCC = AVCC0 = 1.8 to 5.5 V | 25 | ||
| External capacitance tolerance, TSCAP pin | CTSCAP | -10 | 10 | % | Multilayer ceramic capacitor | 25 | |
| Input pull-up resistor | RU | 10 | 20 | 100 | kΩ | Vin = 0 V | 32 |
| Input leakage current, RES, P200, P214, P215 | Iin | 1 | µA | Vin = 0 V; Vin = VCC | 32 | ||
| Three-state leakage current, 5V-tolerant ports | ITSI | 1 | µA | Vin = 0 V; Vin = 5.8 V | 32 | ||
| Input capacitance, P200 | Cin | 30 | pF | Vin = 0 V, f = 1 MHz, Ta = 25°C | 32 | ||
| Input capacitance, other input pins | Cin | 15 | pF | Vin = 0 V, f = 1 MHz, Ta = 25°C | 32 | ||
| Permissible output current (max per pin), other output pins | IOH | -4 | mA | 27 | |||
| Permissible output current (max per pin), other output pins | IOL | 20 | mA | 27 | |||
| Permissible output current (max per pin), ports P000 to P004, P010 to P015, P212, P213, P400, P401, P407 | IOL | 8 | mA | 27 | |||
| Supply current, high-speed normal mode, CoreMark | ICC | 4.8 | mA | ICLK = 48 MHz; all peripheral clocks disabled, CoreMark code executing from flash | 33 | ||
| Supply current, high-speed normal mode, all peripheral clocks enabled | ICC | 13 | mA | ICLK = 48 MHz; all peripheral clocks enabled, code executing from flash | 33 | ||
| Software standby mode supply current | ICC | 0.25 | 1.3 | µA | Ta = 25°C; all SRAMs on | 35 | |
| Software standby mode supply current | ICC | 0.55 | 3.7 | µA | Ta = 55°C; all SRAMs on | 35 | |
| Software standby mode supply current | ICC | 1.95 | 12 | µA | Ta = 85°C; all SRAMs on | 35 | |
| Software standby mode supply current | ICC | 3.9 | 42 | µA | Ta = 105°C; all SRAMs on | 35 | |
| Operation frequency, system clock (ICLK) | f | 0.032768 | 48 | MHz | VCC = AVCC0 = 1.8 to 5.5 V | 38 | |
| LOCO clock oscillation frequency | fLOCO | 27.8528 | 32.768 | 37.6832 | kHz | 39 | |
| IWDT-dedicated clock oscillation frequency | fILOCO | 12.75 | 15 | 17.25 | kHz | 39 | |
| MOCO clock oscillation frequency | fMOCO | 6.8 | 8 | 9.2 | MHz | 39 | |
| HOCO clock oscillation frequency (48 MHz) | fHOCO48 | 47.52 | 48 | 48.48 | MHz | Ta = -40 to 105°C; 1.6 ≤ VCC ≤ 5.5 | 39 |
| Main clock oscillator oscillation frequency | fMAIN | 1 | 20 | MHz | 1.8 ≤ VCC ≤ 5.5 | 39 | |
| RES pulse width, not at power-on | tRESW | 30 | µs | 41 | |||
| TSN relative accuracy | -1.5 | 1.5 | °C | 2.4 V or above | 73 | ||
| TSN output voltage at 25°C | 1.05 | V | VCC = 3.3 V | 73 | |||
| TSN temperature slope | -3.3 | mV/°C | 73 | ||||
| Thermal resistance, junction-to-ambient, 32-pin LQFP | θja | 60.9 | ℃/W | JESD 51-2 and 51-7 compliant | 37 | ||
| Thermal resistance, junction-to-top center case, 32-pin LQFP | Ψjt | 2.5 | ℃/W | JESD 51-2 and 51-7 compliant | 37 | ||
| External capacitor connected to VCL pin | VCL | 4.7 | µF | 25 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminal material (Pb-free) A: Sn (Tin) only | 7 |
CAD (KiCad official)
- Symbol:
R7FA2E1A52DFJ#AA0 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
r7fa2e1a52dfj-aa0-etched.step/r7fa2e1a52dfj-aa0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r7fa2e1a52dfj-aa0.step/r7fa2e1a52dfj-aa0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (121 pp, sha256
9f16441e2434196a, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).