3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownR5F524T8ADFM#11
RENESAS · Pre-ordered MCUs · LQFP-64(10x10)
R5F524T8ADFM#11 from RENESAS, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P02 | bidirectional | General I/O port P02 with alternate functions MTIOC9D, CTS1#, RTS1#, SS1#, IRQ5 and ADST0. |
| 2 | P00 | bidirectional | General I/O port P00 with alternate functions IRQ2 and ADST1. |
| 3 | VCL | power_out | Connect this pin to VSS via a 4.7 µF smoothing capacitor placed close to the pin; do not apply the power supply voltage to this pin. |
| 4 | MD | input | Operating mode setting pin; its signal level must not be changed during operation. |
| 5 | P01 | bidirectional | General I/O port P01 with alternate functions POE12#, IRQ4 and ADST2. |
| 6 | RES# | input | Reset pin; the MCU enters the reset state when this signal goes low. |
| 7 | P37/XTAL | passive | Output pin for connecting a crystal (XTAL), shared with general I/O port P37. |
| 8 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 9 | P36/EXTAL | input | Input pin for an external clock (EXTAL) or crystal connection, shared with general port P36. |
| 10 | VCC | power_in | Power supply pin; connect to the system power supply, operating from a single 2.7 V to 5.5 V supply. |
| 11 | PE2 | input | Input-only general port PE2 with alternate functions POE10# and NMI (non-maskable interrupt request). |
| 12 | PD7 | bidirectional | General I/O port PD7 with alternate functions MTIOC9A, TMRI1, TMRI5 and SSLA1. |
| 13 | PD6 | bidirectional | General I/O port PD6 with alternate functions MTIOC9C, TMO1, CTS1#, RTS1#, SS1# and SSLA0. |
| 14 | PD5 | bidirectional | General I/O port PD5 with alternate functions TMRI0, TMRI6, RXD1, SMISO1 and SSCL1. |
| 15 | PD4 | bidirectional | General I/O port PD4 with alternate functions TMCI0, TMCI6, SCK1 and IRQ2. |
| 16 | PD3 | bidirectional | General I/O port PD3 with alternate functions TMO0, TXD1, SMOSI1 and SSDA1. |
| 17 | PB6 | bidirectional | General I/O port PB6 with alternate functions RXD5, SMISO5, SSCL5 and IRQ5. |
| 18 | PB5 | bidirectional | General I/O port PB5 with alternate functions TXD5, SMOSI5 and SSDA5. |
| 19 | PB4 | bidirectional | General I/O port PB4 with alternate functions POE8#, CTS5#, RTS5#, SS5# and IRQ3. |
| 20 | PB3 | bidirectional | General I/O port PB3 with alternate functions MTIOC0A, CACREF, SCK6 and RSPCKA. |
| 21 | PB2 | bidirectional | General I/O port PB2 with alternate functions MTIOC0B, TMRI0, ADSM0, TXD6, SMOSI6, SSDA6 and SDA0. |
| 22 | PB1 | bidirectional | General I/O port PB1 with alternate functions MTIOC0C, TMCI0, ADSM1, RXD6, SMISO6, SSCL6 and SCL0. |
| 23 | VCC | power_in | Power supply pin; connect to the system power supply (2.7 V to 5.5 V). |
| 24 | P96 | bidirectional | General I/O port P96 with alternate functions POE4# and IRQ4. |
| 25 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 26 | P95 | bidirectional | General I/O port P95 with alternate function MTIOC6B. |
| 27 | P94 | bidirectional | General I/O port P94 with alternate function MTIOC7A. |
| 28 | P93 | bidirectional | General I/O port P93 with alternate function MTIOC7B. |
| 29 | P92 | bidirectional | General I/O port P92 with alternate function MTIOC6D. |
| 30 | P91 | bidirectional | General I/O port P91 with alternate function MTIOC7C. |
| 31 | P90 | bidirectional | General I/O port P90 with alternate function MTIOC7D. |
| 32 | P76 | bidirectional | General I/O port P76 with alternate function MTIOC4D. |
| 33 | P75 | bidirectional | General I/O port P75 with alternate function MTIOC4C. |
| 34 | P74 | bidirectional | General I/O port P74 with alternate function MTIOC3D. |
| 35 | P73 | bidirectional | General I/O port P73 with alternate function MTIOC4B. |
| 36 | P72 | bidirectional | General I/O port P72 with alternate function MTIOC4A. |
| 37 | P71 | bidirectional | General I/O port P71 with alternate function MTIOC3B. |
| 38 | P70 | bidirectional | General I/O port P70 with alternate functions POE0# and IRQ5. |
| 39 | VCC | power_in | Power supply pin; connect to the system power supply (2.7 V to 5.5 V). |
| 40 | P31 | bidirectional | General I/O port P31 with alternate functions MTIOC0A, MTCLKC, TMRI6, SSLA1 and IRQ6. |
| 41 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 42 | P30 | bidirectional | General I/O port P30 with alternate functions MTIOC0B, MTCLKD, TMCI6, SSLA0, IRQ7 and COMP3. |
| 43 | P24 | bidirectional | General I/O port P24 with alternate functions MTIC5U, TMCI2, TMO6, RSPCKA and COMP0. |
| 44 | P23 | bidirectional | General I/O port P23 with alternate functions MTIC5V, TMO2, CACREF, MOSIA and COMP1. |
| 45 | P22 | bidirectional | General I/O port P22 with alternate functions MTIC5W, TMRI2, TMO4, MISOA, ADTRG2# and COMP2. |
| 46 | P21 | bidirectional | General I/O port P21 with alternate functions MTCLKA, MTIOC9A, TMCI4, IRQ6, ADTRG1#, AN116 and CVREFC1. |
| 47 | AVCC2/VREF | power_in | Analog power supply pin for 12-bit A/D converter unit 2 and analog power supply pin for comparator C and 8-bit D/A converter; on the 64-pin package VREF is internally connected to AVCC2 and shared. |
| 48 | AVSS2 | power_in | Analog ground and reference ground for 12-bit A/D converter unit 2, comparator C and 8-bit D/A converter. |
| 49 | P54 | bidirectional | General I/O port P54 with alternate functions AN210 and IRQ2. |
| 50 | P53 | bidirectional | General I/O port P53 with alternate functions AN209 and IRQ1. |
| 51 | P52 | bidirectional | General I/O port P52 with alternate functions AN208 and IRQ0. |
| 52 | P51 | bidirectional | General I/O port P51 with alternate function AN207. |
| 53 | P50 | bidirectional | General I/O port P50 with alternate function AN206. |
| 54 | P46 | bidirectional | General I/O port P46 with alternate functions AN102, CMPC12, CMPC13, CMPC30 and CMPC31. |
| 55 | P45 | bidirectional | General I/O port P45 with alternate functions AN101, CMPC02, CMPC03, CMPC20 and CMPC21. |
| 56 | P44 | bidirectional | General I/O port P44 with alternate functions AN100, CMPC10, CMPC11, CMPC32 and CMPC33. |
| 57 | P42 | bidirectional | General I/O port P42 with alternate function AN002. |
| 58 | P41 | bidirectional | General I/O port P41 with alternate function AN001. |
| 59 | P40 | bidirectional | General I/O port P40 with alternate functions AN000, CMPC00, CMPC01, CMPC22 and CMPC23. |
| 60 | AVCC1 | power_in | Analog power supply and reference power supply pin for 12-bit A/D converter unit 1. |
| 61 | AVCC0 | power_in | Analog power supply and reference power supply pin for 12-bit A/D converter unit 0. |
| 62 | AVSS0 | power_in | Analog ground and reference ground pin for 12-bit A/D converter unit 0. |
| 63 | AVSS1 | power_in | Analog ground and reference ground pin for 12-bit A/D converter unit 1. |
| 64 | P11 | bidirectional | General I/O port P11 with alternate functions MTIOC3A, MTCLKC, TMO3 and IRQ1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | 2.7 | 5.5 | V | 71 | ||
| Analog power supply voltages | AVCC0, AVCC1, AVCC2, VREF | 5.5 | V | min printed as VCC | 71 | ||
| Power supply voltage (absolute maximum) | VCC | -0.3 | 6.5 | V | VSS = AVSS0 = AVSS1 = AVSS2 = 0 V | 71 | |
| Input voltage, port 4, 5, 6 | Vin | -0.3 | V | max printed as VREF + 0.3 | 71 | ||
| Input voltage, except port 4, 5, 6 and 5 V tolerant ports | Vin | -0.3 | V | max printed as VCC + 0.3 | 71 | ||
| Input voltage, 5 V tolerant ports | Vin | -0.3 | 6.5 | V | 71 | ||
| Analog power supply voltage | AVCC0, AVCC1, AVCC2, VREF | -0.3 | 6.5 | V | 71 | ||
| Analog input voltage (AN000-003, AN100-103, AN200-211) | VAN | -0.3 | V | max printed as VREF + 0.3 | 71 | ||
| Operating temperature | Topr | -40 | 85 | °C | 71 | ||
| Storage temperature | Tstg | -55 | 125 | °C | 71 | ||
| Permissible total consumption power | Pd | 570 | mW | 78 | |||
| Schmitt trigger input voltage VIH, ports 00-02, 10, 11, 20-24, 30-33, 36, 37, 70-76, 80-82, 90-96, A0-A5, B0, B3-B7, D0-D7, E0-E5, RES# | VIH | 0.8 | 0.3 | V | min printed as VCC × 0.8; max printed as VCC + 0.3 (VCC-relative) | 72 | |
| Schmitt trigger input voltage, RIIC input pin (except SMBus, 5 V tolerant) | VIH | 0.7 | 5.8 | V | min printed as VCC × 0.7 | 72 | |
| Schmitt trigger input voltage, ports B1, B2 (5 V tolerant) | VIH | 0.8 | 5.8 | V | min printed as VCC × 0.8 | 72 | |
| Schmitt trigger input voltage, ports 40-47, 50-55, 60-65 | VIH | 0.8 | 0.3 | V | min printed as VREF × 0.8; max printed as VREF + 0.3 (VREF-relative) | 72 | |
| Schmitt trigger input voltage, RIIC input pin (except SMBus) | VIL | -0.3 | 0.3 | V | max printed as VCC × 0.3 | 72 | |
| Schmitt trigger input voltage, ports 40-47, 50-55, 60-65 | VIL | -0.3 | 0.2 | V | max printed as VREF × 0.2 | 72 | |
| Schmitt trigger input voltage, other than RIIC and ports 40-47, 50-55, 60-65 | VIL | -0.3 | 0.2 | V | max printed as VCC × 0.2 | 72 | |
| Input level voltage, MD | VIH | 0.9 | 0.3 | V | min printed as VCC × 0.9; max printed as VCC + 0.3 | 72 | |
| Input level voltage, EXTAL (external clock input) | VIH | 0.8 | 0.3 | V | min printed as VCC × 0.8; max printed as VCC + 0.3 | 72 | |
| Input level voltage, RIIC input pin (SMBus) | VIH | 2.1 | 0.3 | V | VCC ≤ 5.2 V; max printed as VCC + 0.3 | 72 | |
| Input level voltage, MD | VIL | -0.3 | 0.1 | V | max printed as VCC × 0.1 | 72 | |
| Input level voltage, EXTAL (external clock input) | VIL | -0.3 | 0.2 | V | max printed as VCC × 0.2 | 72 | |
| Input level voltage, RIIC input pin (SMBus) | VIL | -0.3 | 0.8 | V | VCC ≤ 5.2 V; max printed as VCC × 0.8 | 72 | |
| Input leakage current, RES#, MD, port E2 | /Iin/ | 1 | μA | Vin = 0 V, VCC | 73 | ||
| Three-state leakage current, port 4, 5, 6 | /ITSI/ | 1 | μA | Vin = 0 V, VREF | 73 | ||
| Input pull-up resistor, all ports (except port E2) | RU | 10 | 20 | 50 | kΩ | Vin = 0 V | 73 |
| Input capacitance, all input pins | Cin | 4 | 15 | pF | Vin = 0 mV, f = 1 MHz, Ta = 25°C | 73 | |
| Output low voltage, ports 71-76, 81, 90-95, B5, D3 | VOL | 0.8 | V | IOL = 10.0 mA | 80 | ||
| Output low voltage, RIIC pins, standard mode | VOL | 0.4 | V | IOL = 3.0 mA | 80 | ||
| Output low voltage, RIIC pins, fast mode | VOL | 0.6 | V | IOL = 6.0 mA | 80 | ||
| Output low voltage, other ports, normal output mode | VOL | 0.8 | V | IOL = 1.0 mA | 80 | ||
| Output low voltage, other ports, high-drive output mode | VOL | 0.8 | V | IOL = 2.0 mA | 80 | ||
| Output high voltage, ports 71-76, 81, 90-95, B5, D3 | VOH | 0.8 | V | min printed as VCC − 0.8; IOH = −5.0 mA | 80 | ||
| Output high voltage, ports 40-47, 50-55, 60-65 | VOH | 0.8 | V | min printed as VREF − 0.8; IOH = −2.0 mA | 80 | ||
| Output high voltage, other ports, normal output mode | VOH | 0.8 | V | min printed as VCC − 0.8; IOH = −2.0 mA | 80 | ||
| Output high voltage, other ports, high-drive output mode | VOH | 0.8 | V | min printed as VCC − 0.8; IOH = −4.0 mA | 80 | ||
| Permissible output low current, ports 71-76, 81, 90-95, B5, D3 | IOL | 10 | mA | 80 | |||
| Permissible output low current, RIIC pins | IOL | 6 | mA | 80 | |||
| Permissible output low current, other ports, normal output mode | IOL | 4 | mA | Normal output mode | 80 | ||
| Permissible output low current, other ports, high-drive output mode | IOL | 8 | mA | High-drive output mode | 80 | ||
| Permissible output low current, total of all output pins | ΣIOL | 110 | mA | 80 | |||
| Permissible output low current, total of ports 40-47, 50-55, 60-65 | ΣIOL | 50 | mA | 80 | |||
| Permissible output high current, ports 71-76, 81, 90-95, B5, D3 | IOH | -5 | mA | 80 | |||
| Permissible output high current, other ports, normal output mode | IOH | -4 | mA | Normal output mode | 80 | ||
| Permissible output high current, other ports, high-drive output mode | IOH | -8 | mA | High-drive output mode | 80 | ||
| Permissible output high current, total of all output pins | ΣIOH | -35 | mA | 80 | |||
| Supply current, high-speed, all peripheral operation Max., ICLK = 80 MHz (Chip Version A) | ICC | 70 | mA | Chip Version A; all peripheral operation Max.; ICLK = 80 MHz | 73 | ||
| Supply current, high-speed, all peripheral operation Max., ICLK = 80 MHz (Chip Version B) | ICC | 80 | mA | Chip Version B; all peripheral operation Max.; ICLK = 80 MHz | 73 | ||
| Software standby mode supply current | ICC | 1 | 55 | μA | Ta = 25°C; Chip Version A | 75 | |
| Software standby mode supply current | ICC | 1.5 | 15 | μA | Ta = 25°C; Chip Version B | 75 | |
| Software standby mode supply current | ICC | 5.5 | 260 | μA | Ta = 85°C; Chip Version A | 75 | |
| Software standby mode supply current | ICC | 13 | 135 | μA | Ta = 85°C; Chip Version B | 75 | |
| Analog power supply current, A/D unit 0 during A/D conversion (PGA in use) | IAVCC | 1.5 | 2.5 | mA | 78 | ||
| Analog power supply current, A/D unit 1 during A/D conversion (S/H and PGA in use) | IAVCC | 4.6 | 6.9 | mA | 78 | ||
| Comparator C operating current | ICMP | 40 | 60 | μA | Comparator enabled | 78 | |
| Waiting for A/D or D/A conversion (all units) analog supply current | IAVCC | 2.2 | μA | 78 | |||
| Allowable voltage change rising/falling gradient | dt/dVCC | 1 | ms/V | When VCC change exceeds VCC ±10% | 79 | ||
| Allowable ripple frequency fr (VCC) | fr (VCC) | 10 | kHz | Vr (VCC) ≤ VCC × 0.2 | 79 | ||
| Permissible error of VCL pin external capacitance | CVCL | 3.3 | 4.7 | 6.1 | μF | 79 | |
| Operating frequency, system clock (ICLK), high-speed mode | fmax | 80 | MHz | VCC = 2.7 V to 5.5 V, Ta = −40 to +85°C | 89 | ||
| Operating frequency, peripheral module clock (PCLKB) | PCLKB | 40 | MHz | 89 | |||
| Main clock oscillator oscillation frequency | fMAIN | 1 | 20 | MHz | 90 | ||
| EXTAL external clock input cycle time | tXcyc | 50 | ns | Figure 5.22 | 90 | ||
| EXTAL external clock input high pulse width | tXH | 20 | ns | 90 | |||
| EXTAL external clock input low pulse width | tXL | 20 | ns | 90 | |||
| EXTAL external clock rise time | tXr | 5 | ns | 90 | |||
| EXTAL external clock fall time | tXf | 5 | ns | 90 | |||
| LOCO clock oscillation frequency | fLOCO | 3.44 | 4 | 4.56 | MHz | 90 | |
| IWDT-dedicated clock oscillation frequency | fILOCO | 12.75 | 15 | 17.25 | kHz | 90 | |
| PLL circuit oscillation frequency | fPLL | 40 | 80 | MHz | 90 | ||
| RES# pulse width at power-on | tRESWP | 3 | ms | Figure 5.29 | 93 | ||
| RES# pulse width, other than power-on | tRESW | 30 | μs | Figure 5.30 | 93 | ||
| Recovery time from software standby mode, crystal, main clock oscillator operating | tSBYMC | 2 | 3 | ms | High-speed mode; Figure 5.32 | 94 | |
| Recovery time from software standby mode, external clock input, main clock oscillator operating | tSBYEX | 35 | 50 | μs | High-speed mode | 94 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Packaging/external pin surface treatment (lead-free) #3: Tray/Sn (Tin) only | 8 |
CAD (KiCad official)
- Symbol:
R5F524T8ADFM#11 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
r5f524t8adfm-11-etched.step/r5f524t8adfm-11-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f524t8adfm-11.step/r5f524t8adfm-11.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (133 pp, sha256
5333b8f831d63caf, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).