main
Ray
Publish 0.1.0
2b417f7
R5F523T3ADFL#30
RENESAS · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
R5F523T3ADFL#30 from RENESAS, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCL | passive | Connect this pin to the VSS pin via the 4.7 μF smoothing capacitor used to stabilize the internal power supply, placed close to the pin; do not apply the power supply voltage to this pin. |
| 2 | MD | input | Operating mode control pin (FINED interface alternate function); the signal level on this pin must not be changed during operation. |
| 3 | RES# | input | Reset pin; the MCU enters the reset state when this signal goes low. |
| 4 | P37/XTAL | bidirectional | Port P37 I/O pin, also the crystal connection pin (XTAL) for the main clock oscillator. |
| 5 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 6 | P36/EXTAL | bidirectional | Port P36 I/O pin, also the external clock input pin (EXTAL) when an external clock is supplied. |
| 7 | VCC | power_in | Power supply pin; connect to the system power supply (operation range 2.7 V to 5.5 V). |
| 8 | PE2 | input | 1-bit input-only port pin, also usable as the POE10# port output enable request input and the NMI non-maskable interrupt request input. |
| 9 | PD6 | bidirectional | General I/O port pin with alternate functions TMO1, SSLA0, CTS1#/RTS1#/SS1#, ADST0 and IRQ5. |
| 10 | PD5 | bidirectional | General I/O port pin with alternate functions TMRI0, RXD1/SMISO1/SSCL1 and IRQ3. |
| 11 | PD4 | bidirectional | General I/O port pin with alternate functions TMCI0, SCK1 and IRQ2. |
| 12 | PD3 | bidirectional | General I/O port pin with alternate functions TMO0 and TXD1/SMOSI1/SSDA1. |
| 13 | PB6 | bidirectional | General I/O port pin with alternate functions RXD5/SMISO5/SSCL5 and IRQ5. |
| 14 | PB5 | bidirectional | General I/O port pin with alternate function TXD5/SMOSI5/SSDA5. |
| 15 | VCC | power_in | Power supply pin; connect to the system power supply. |
| 16 | PB4 | bidirectional | General I/O port pin with alternate functions POE8# and IRQ3. |
| 17 | PB3 | bidirectional | General I/O port pin with alternate functions MTIOC0A, CACREF, SCK5 and RSPCKA. |
| 18 | PB2 | bidirectional | General I/O port pin with alternate functions MTIOC0B, ADSM0, TXD5/SMOSI5/SSDA5 and SDA0. |
| 19 | PB1 | bidirectional | General I/O port pin with alternate functions MTIOC0C, RXD5/SMISO5/SSCL5, SCL0 and IRQ2. |
| 20 | PB0 | bidirectional | General I/O port pin with alternate functions MTIOC0D and MOSIA. |
| 21 | PA3 | bidirectional | General I/O port pin with alternate functions MTIOC2A and SSLA0. |
| 22 | PA2 | bidirectional | General I/O port pin with alternate functions MTIOC2B, CTS5#/RTS5#/SS5#/SSLA1 and IRQ4. |
| 23 | P94 | bidirectional | General I/O port pin with alternate functions MTIOC0C, TMO1, MISOA and IRQ1. |
| 24 | P93 | bidirectional | General I/O port pin with alternate functions MTIOC0B, TMRI1, SCK5/RSPCKA and IRQ0. |
| 25 | P76 | bidirectional | General I/O port pin (large current port) with alternate function MTIOC4D. |
| 26 | P75 | bidirectional | General I/O port pin (large current port) with alternate function MTIOC4C. |
| 27 | P74 | bidirectional | General I/O port pin (large current port) with alternate function MTIOC3D. |
| 28 | P73 | bidirectional | General I/O port pin (large current port) with alternate function MTIOC4B. |
| 29 | P72 | bidirectional | General I/O port pin (large current port) with alternate function MTIOC4A. |
| 30 | P71 | bidirectional | General I/O port pin (large current port) with alternate function MTIOC3B. |
| 31 | P70 | bidirectional | General I/O port pin with alternate functions POE0# and IRQ5. |
| 32 | VCC | power_in | Power supply pin; connect to the system power supply. |
| 33 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 34 | P24 | bidirectional | General I/O port pin with alternate functions MTIC5U/TMCI2, RSPCKA, COMP0 and IRQ3. |
| 35 | P23 | bidirectional | General I/O port pin with alternate functions MTIC5V/CACREF/TMO2, MOSIA, COMP1 and IRQ4. |
| 36 | P22 | bidirectional | General I/O port pin with alternate functions MTIC5W/TMRI2, MISOA, COMP2 and IRQ2. |
| 37 | P47 | bidirectional | General I/O port pin with alternate functions AN007, CMPC12 and CMPC22 (analog input AN007 for the 12-bit A/D converter). |
| 38 | P46 | bidirectional | General I/O port pin with alternate functions AN006 and CMPC02 (analog input AN006 for the 12-bit A/D converter). |
| 39 | P45 | bidirectional | General I/O port pin with alternate functions AN005 and CMPC21 (analog input AN005 for the 12-bit A/D converter). |
| 40 | P44 | bidirectional | General I/O port pin with alternate functions AN004 and CMPC11 (analog input AN004 for the 12-bit A/D converter). |
| 41 | P43 | bidirectional | General I/O port pin with alternate functions AN003 and CMPC01 (analog input AN003 for the 12-bit A/D converter). |
| 42 | P42 | bidirectional | General I/O port pin with alternate functions AN002 and CMPC20 (analog input AN002 for the 12-bit A/D converter). |
| 43 | P41 | bidirectional | General I/O port pin with alternate functions AN001 and CMPC10 (analog input AN001 for the 12-bit A/D converter). |
| 44 | P40 | bidirectional | General I/O port pin with alternate functions AN000 and CMPC00 (analog input AN000 for the 12-bit A/D converter). |
| 45 | AVCC0 | power_in | Analog voltage supply pin for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VCC when these modules are not used. |
| 46 | AVSS0 | power_in | Analog ground pin for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VSS when these modules are not used. |
| 47 | P11 | bidirectional | General I/O port pin with alternate functions MTIOC3A, MTCLKC, TMO3, IRQ1, AN016 and CVREFC0 (analog input AN016 for the 12-bit A/D converter). |
| 48 | P10 | bidirectional | General I/O port pin with alternate functions MTCLKD, TMRI3, IRQ0, AN017 and CVREFC1 (analog input AN017 for the 12-bit A/D converter). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.3 | 6.5 | V | 41 | ||
| Input voltage Port 4 (datasheet max AVCC0+0.3 V, not computed) | Vin | -0.3 | V | 41 | |||
| Input voltage except port 4 and 5 V tolerant ports (datasheet max VCC+0.3 V, not computed) | Vin | -0.3 | V | 41 | |||
| Input voltage 5 V tolerant ports | Vin | -0.3 | 6.5 | V | 41 | ||
| Reference power supply voltage VREFH0 (datasheet max AVCC0+0.3 V, not computed) | VREFH0 | -0.3 | V | 41 | |||
| Analog power supply voltage | AVCC0 | -0.3 | 6.5 | V | 41 | ||
| Analog input voltage when AN000 to AN007 used (datasheet max AVCC0+0.3 V, not computed) | VAN | -0.3 | V | 41 | |||
| Analog input voltage when AN016 and AN017 used (datasheet max VCC+0.3 V, not computed) | VAN | -0.3 | V | 41 | |||
| Operating temperature, D version | Topr | -40 | 85 | °C | 41 | ||
| Storage temperature | Tstg | -55 | 125 | °C | 41 | ||
| Power supply voltages | VCC | 2.7 | 5.5 | V | 41 | ||
| Analog power supply voltages (datasheet min VCC, not computed) | AVCC0 | 5.5 | V | 41 | |||
| Schmitt trigger input voltage VIH, RIIC input pin (except SMBus, 5 V tolerant) (min VCC×0.7, not computed) | VIH | 5.8 | V | 42 | |||
| Schmitt trigger input voltage VIH, ports B1 and B2 (5 V tolerant) (min VCC×0.8, not computed) | VIH | 5.8 | V | 42 | |||
| Schmitt trigger input voltage VIL, RIIC input pin (except SMBus) | VIL | -0.3 | V | 42 | |||
| Input voltage VIL, ports 40 to 47 (max AVCC0×0.2, not computed) | VIL | -0.3 | V | 42 | |||
| Schmitt trigger input voltage VIL, other than RIIC input pin or ports 40 to 47 (max VCC×0.2, not computed) | VIL | -0.3 | V | 42 | |||
| Input level voltage VIL, MD (max VCC×0.1, not computed) | VIL | -0.3 | V | 42 | |||
| Input level voltage VIL, EXTAL external clock input (max VCC×0.2, not computed) | VIL | -0.3 | V | 42 | |||
| Input level voltage VIH, RIIC input pin (SMBus) (max VCC+0.3, not computed) | VIH | 2.1 | V | 42 | |||
| Input level voltage VIL, RIIC input pin (SMBus) | VIL | -0.3 | 0.8 | V | 42 | ||
| Input leakage current, RES#, MD, port E2 | Iin | 1 | μA | Vin = 0 V, VCC | 42 | ||
| Three-state leakage current (off-state), port 4 | ITSI | 1 | μA | Vin = 0 V, AVCC0 | 42 | ||
| Three-state leakage current (off-state), ports except 5 V tolerant ports and port 4 | ITSI | 0.2 | Vin = 0 V, VCC | 42 | |||
| Three-state leakage current (off-state), 5 V tolerant ports | ITSI | 1 | Vin = 0 V, 5.8 V | 42 | |||
| Input capacitance, all input pins | Cin | 4 | 15 | pF | Vin = 0 mV, f = 1 MHz, Ta = 25°C | 42 | |
| Input pull-up resistor, all ports except port E2 | RU | 10 | 20 | 50 | kΩ | Vin = 0 V | 42 |
| Supply current, high-speed operating mode, normal, all peripheral operation max | ICC | 33 | mA | All peripheral operation: Max., ICLK = 40 MHz | 43 | ||
| Supply current, high-speed operating mode, normal, all peripheral operation max | ICC | 24.5 | mA | All peripheral operation: Max., ICLK = 32 MHz | 43 | ||
| Supply current, middle-speed operating mode, normal, all peripheral operation max | ICC | 11 | mA | All peripheral operation: Max., ICLK = 12 MHz | 43 | ||
| Supply current, software standby mode | ICC | 0.45 | 0.91 | μA | Ta = 25°C | 44 | |
| Supply current, software standby mode | ICC | 0.66 | 2.23 | μA | Ta = 55°C | 44 | |
| Supply current, software standby mode | ICC | 1.5 | 9.14 | μA | Ta = 85°C | 44 | |
| Supply current, software standby mode | ICC | 3.42 | 23.94 | μA | Ta = 105°C | 44 | |
| Permissible total consumption power, D version | Pd | 300 | mW | D-version product | 46 | ||
| Analog power supply current during A/D conversion, sample-and-hold circuits in use | IAVCC | 3.1 | 5.2 | mA | During A/D conversion (Sample-and-hold circuits in use) | 46 | |
| Analog power supply current during A/D conversion, sample-and-hold circuits not in use | IAVCC | 0.9 | 1.8 | mA | During A/D conversion (Sample-and-hold circuits not in use) | 46 | |
| Analog power supply current during D/A conversion | IAVCC | 0.4 | 0.9 | mA | During D/A conversion | 46 | |
| Analog power supply current waiting for A/D and D/A conversion (all units) | IAVCC | 0.4 | μA | Waiting for A/D and D/A conversion (all units) | 46 | ||
| Reference power supply current during A/D conversion | IREFH0 | 80 | 130 | μA | During A/D conversion | 46 | |
| Reference power supply current waiting for A/D conversion (all units) | IREFH0 | 60 | nA | Waiting for A/D conversion (all units) | 46 | ||
| Comparator C operating current, per channel | ICMP | 40 | 60 | μA | Comparator enabled (per channel) | 46 | |
| Power-on VCC rising gradient at normal startup | SrVCC | 0.02 | 20 | ms/V | At normal startup | 46 | |
| Power-on VCC rising gradient, voltage monitoring 0 reset enabled at startup | 0.02 | ms/V | Voltage monitoring 0 reset enabled at startup | 46 | |||
| Allowable ripple frequency fr(VCC) | fr (VCC) | 10 | kHz | Figure 5.3 | 47 | ||
| Allowable ripple frequency fr(VCC) | fr (VCC) | 1 | MHz | Figure 5.3 | 47 | ||
| Allowable ripple frequency fr(VCC) | fr (VCC) | 10 | MHz | Figure 5.3 | 47 | ||
| Allowable voltage change rising/falling gradient | dt/dVCC | 1 | ms/V | When VCC change exceeds VCC ±10% | 47 | ||
| Permissible error of VCL pin external capacitance | CVCL | 3.3 | 4.7 | 6.1 | μF | 47 | |
| Permissible output low current, large current ports (ports 71 to 76, port B5, port D3) | IOL | 10 | mA | 47 | |||
| Permissible output low current, ports other than large current ports, normal output mode | IOL | 4 | mA | Normal output mode | 47 | ||
| Permissible output low current, ports other than large current ports, high-drive output mode | IOL | 8 | mA | High-drive output mode | 47 | ||
| Permissible output low current, total of all output pins | IOL | 110 | mA | 47 | |||
| Permissible output high current, large current ports (ports 71 to 76, port B5, port D3) | IOH | -5 | mA | 47 | |||
| Permissible output high current, ports other than large current ports, normal output mode | IOH | -4 | mA | Normal output mode | 47 | ||
| Permissible output high current, ports other than large current ports, high-drive output mode | IOH | -8 | mA | High-drive output mode | 47 | ||
| Permissible output high current, total of all output pins | IOH | -35 | mA | 47 | |||
| Output low voltage, large current ports (ports 71 to 76, port B5, port D3) | VOL | 0.8 | V | IOL = 10.0mA | 48 | ||
| Output low voltage, RIIC pins, standard mode | VOL | 0.4 | V | IOL = 3.0mA | 48 | ||
| Output low voltage, ports other than above, normal output mode | VOL | 0.8 | V | IOL = 1.0mA | 48 |
CAD (KiCad official)
- Symbol:
R5F523T3ADFL#30 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
r5f523t3adfl-30-etched.step/r5f523t3adfl-30-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f523t3adfl-30.step/r5f523t3adfl-30.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (98 pp, sha256
58681e257aeabc3e, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# R5F523T3ADFL#30
**RENESAS** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
R5F523T3ADFL#30 from RENESAS, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCL | passive | Connect this pin to the VSS pin via the 4.7 μF smoothing capacitor used to stabilize the internal power supply, placed close to the pin; do not apply the power supply voltage to this pin. |
| 2 | MD | input | Operating mode control pin (FINED interface alternate function); the signal level on this pin must not be changed during operation. |
| 3 | RES# | input | Reset pin; the MCU enters the reset state when this signal goes low. |
| 4 | P37/XTAL | bidirectional | Port P37 I/O pin, also the crystal connection pin (XTAL) for the main clock oscillator. |
| 5 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 6 | P36/EXTAL | bidirectional | Port P36 I/O pin, also the external clock input pin (EXTAL) when an external clock is supplied. |
| 7 | VCC | power_in | Power supply pin; connect to the system power supply (operation range 2.7 V to 5.5 V). |
| 8 | PE2 | input | 1-bit input-only port pin, also usable as the POE10# port output enable request input and the NMI non-maskable interrupt request input. |
| 9 | PD6 | bidirectional | General I/O port pin with alternate functions TMO1, SSLA0, CTS1#/RTS1#/SS1#, ADST0 and IRQ5. |
| 10 | PD5 | bidirectional | General I/O port pin with alternate functions TMRI0, RXD1/SMISO1/SSCL1 and IRQ3. |
| 11 | PD4 | bidirectional | General I/O port pin with alternate functions TMCI0, SCK1 and IRQ2. |
| 12 | PD3 | bidirectional | General I/O port pin with alternate functions TMO0 and TXD1/SMOSI1/SSDA1. |
| 13 | PB6 | bidirectional | General I/O port pin with alternate functions RXD5/SMISO5/SSCL5 and IRQ5. |
| 14 | PB5 | bidirectional | General I/O port pin with alternate function TXD5/SMOSI5/SSDA5. |
| 15 | VCC | power_in | Power supply pin; connect to the system power supply. |
| 16 | PB4 | bidirectional | General I/O port pin with alternate functions POE8# and IRQ3. |
| 17 | PB3 | bidirectional | General I/O port pin with alternate functions MTIOC0A, CACREF, SCK5 and RSPCKA. |
| 18 | PB2 | bidirectional | General I/O port pin with alternate functions MTIOC0B, ADSM0, TXD5/SMOSI5/SSDA5 and SDA0. |
| 19 | PB1 | bidirectional | General I/O port pin with alternate functions MTIOC0C, RXD5/SMISO5/SSCL5, SCL0 and IRQ2. |
| 20 | PB0 | bidirectional | General I/O port pin with alternate functions MTIOC0D and MOSIA. |
| 21 | PA3 | bidirectional | General I/O port pin with alternate functions MTIOC2A and SSLA0. |
| 22 | PA2 | bidirectional | General I/O port pin with alternate functions MTIOC2B, CTS5#/RTS5#/SS5#/SSLA1 and IRQ4. |
| 23 | P94 | bidirectional | General I/O port pin with alternate functions MTIOC0C, TMO1, MISOA and IRQ1. |
| 24 | P93 | bidirectional | General I/O port pin with alternate functions MTIOC0B, TMRI1, SCK5/RSPCKA and IRQ0. |
| 25 | P76 | bidirectional | General I/O port pin (large current port) with alternate function MTIOC4D. |
| 26 | P75 | bidirectional | General I/O port pin (large current port) with alternate function MTIOC4C. |
| 27 | P74 | bidirectional | General I/O port pin (large current port) with alternate function MTIOC3D. |
| 28 | P73 | bidirectional | General I/O port pin (large current port) with alternate function MTIOC4B. |
| 29 | P72 | bidirectional | General I/O port pin (large current port) with alternate function MTIOC4A. |
| 30 | P71 | bidirectional | General I/O port pin (large current port) with alternate function MTIOC3B. |
| 31 | P70 | bidirectional | General I/O port pin with alternate functions POE0# and IRQ5. |
| 32 | VCC | power_in | Power supply pin; connect to the system power supply. |
| 33 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 34 | P24 | bidirectional | General I/O port pin with alternate functions MTIC5U/TMCI2, RSPCKA, COMP0 and IRQ3. |
| 35 | P23 | bidirectional | General I/O port pin with alternate functions MTIC5V/CACREF/TMO2, MOSIA, COMP1 and IRQ4. |
| 36 | P22 | bidirectional | General I/O port pin with alternate functions MTIC5W/TMRI2, MISOA, COMP2 and IRQ2. |
| 37 | P47 | bidirectional | General I/O port pin with alternate functions AN007, CMPC12 and CMPC22 (analog input AN007 for the 12-bit A/D converter). |
| 38 | P46 | bidirectional | General I/O port pin with alternate functions AN006 and CMPC02 (analog input AN006 for the 12-bit A/D converter). |
| 39 | P45 | bidirectional | General I/O port pin with alternate functions AN005 and CMPC21 (analog input AN005 for the 12-bit A/D converter). |
| 40 | P44 | bidirectional | General I/O port pin with alternate functions AN004 and CMPC11 (analog input AN004 for the 12-bit A/D converter). |
| 41 | P43 | bidirectional | General I/O port pin with alternate functions AN003 and CMPC01 (analog input AN003 for the 12-bit A/D converter). |
| 42 | P42 | bidirectional | General I/O port pin with alternate functions AN002 and CMPC20 (analog input AN002 for the 12-bit A/D converter). |
| 43 | P41 | bidirectional | General I/O port pin with alternate functions AN001 and CMPC10 (analog input AN001 for the 12-bit A/D converter). |
| 44 | P40 | bidirectional | General I/O port pin with alternate functions AN000 and CMPC00 (analog input AN000 for the 12-bit A/D converter). |
| 45 | AVCC0 | power_in | Analog voltage supply pin for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VCC when these modules are not used. |
| 46 | AVSS0 | power_in | Analog ground pin for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VSS when these modules are not used. |
| 47 | P11 | bidirectional | General I/O port pin with alternate functions MTIOC3A, MTCLKC, TMO3, IRQ1, AN016 and CVREFC0 (analog input AN016 for the 12-bit A/D converter). |
| 48 | P10 | bidirectional | General I/O port pin with alternate functions MTCLKD, TMRI3, IRQ0, AN017 and CVREFC1 (analog input AN017 for the 12-bit A/D converter). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.3 | | 6.5 | V | | 41 |
| Input voltage Port 4 (datasheet max AVCC0+0.3 V, not computed) | Vin | -0.3 | | | V | | 41 |
| Input voltage except port 4 and 5 V tolerant ports (datasheet max VCC+0.3 V, not computed) | Vin | -0.3 | | | V | | 41 |
| Input voltage 5 V tolerant ports | Vin | -0.3 | | 6.5 | V | | 41 |
| Reference power supply voltage VREFH0 (datasheet max AVCC0+0.3 V, not computed) | VREFH0 | -0.3 | | | V | | 41 |
| Analog power supply voltage | AVCC0 | -0.3 | | 6.5 | V | | 41 |
| Analog input voltage when AN000 to AN007 used (datasheet max AVCC0+0.3 V, not computed) | VAN | -0.3 | | | V | | 41 |
| Analog input voltage when AN016 and AN017 used (datasheet max VCC+0.3 V, not computed) | VAN | -0.3 | | | V | | 41 |
| Operating temperature, D version | Topr | -40 | | 85 | °C | | 41 |
| Storage temperature | Tstg | -55 | | 125 | °C | | 41 |
| Power supply voltages | VCC | 2.7 | | 5.5 | V | | 41 |
| Analog power supply voltages (datasheet min VCC, not computed) | AVCC0 | | | 5.5 | V | | 41 |
| Schmitt trigger input voltage VIH, RIIC input pin (except SMBus, 5 V tolerant) (min VCC×0.7, not computed) | VIH | | | 5.8 | V | | 42 |
| Schmitt trigger input voltage VIH, ports B1 and B2 (5 V tolerant) (min VCC×0.8, not computed) | VIH | | | 5.8 | V | | 42 |
| Schmitt trigger input voltage VIL, RIIC input pin (except SMBus) | VIL | -0.3 | | | V | | 42 |
| Input voltage VIL, ports 40 to 47 (max AVCC0×0.2, not computed) | VIL | -0.3 | | | V | | 42 |
| Schmitt trigger input voltage VIL, other than RIIC input pin or ports 40 to 47 (max VCC×0.2, not computed) | VIL | -0.3 | | | V | | 42 |
| Input level voltage VIL, MD (max VCC×0.1, not computed) | VIL | -0.3 | | | V | | 42 |
| Input level voltage VIL, EXTAL external clock input (max VCC×0.2, not computed) | VIL | -0.3 | | | V | | 42 |
| Input level voltage VIH, RIIC input pin (SMBus) (max VCC+0.3, not computed) | VIH | 2.1 | | | V | | 42 |
| Input level voltage VIL, RIIC input pin (SMBus) | VIL | -0.3 | | 0.8 | V | | 42 |
| Input leakage current, RES#, MD, port E2 | Iin | | | 1 | μA | Vin = 0 V, VCC | 42 |
| Three-state leakage current (off-state), port 4 | ITSI | | | 1 | μA | Vin = 0 V, AVCC0 | 42 |
| Three-state leakage current (off-state), ports except 5 V tolerant ports and port 4 | ITSI | | | 0.2 | | Vin = 0 V, VCC | 42 |
| Three-state leakage current (off-state), 5 V tolerant ports | ITSI | | | 1 | | Vin = 0 V, 5.8 V | 42 |
| Input capacitance, all input pins | Cin | | 4 | 15 | pF | Vin = 0 mV, f = 1 MHz, Ta = 25°C | 42 |
| Input pull-up resistor, all ports except port E2 | RU | 10 | 20 | 50 | kΩ | Vin = 0 V | 42 |
| Supply current, high-speed operating mode, normal, all peripheral operation max | ICC | | | 33 | mA | All peripheral operation: Max., ICLK = 40 MHz | 43 |
| Supply current, high-speed operating mode, normal, all peripheral operation max | ICC | | | 24.5 | mA | All peripheral operation: Max., ICLK = 32 MHz | 43 |
| Supply current, middle-speed operating mode, normal, all peripheral operation max | ICC | | | 11 | mA | All peripheral operation: Max., ICLK = 12 MHz | 43 |
| Supply current, software standby mode | ICC | | 0.45 | 0.91 | μA | Ta = 25°C | 44 |
| Supply current, software standby mode | ICC | | 0.66 | 2.23 | μA | Ta = 55°C | 44 |
| Supply current, software standby mode | ICC | | 1.5 | 9.14 | μA | Ta = 85°C | 44 |
| Supply current, software standby mode | ICC | | 3.42 | 23.94 | μA | Ta = 105°C | 44 |
| Permissible total consumption power, D version | Pd | | | 300 | mW | D-version product | 46 |
| Analog power supply current during A/D conversion, sample-and-hold circuits in use | IAVCC | | 3.1 | 5.2 | mA | During A/D conversion (Sample-and-hold circuits in use) | 46 |
| Analog power supply current during A/D conversion, sample-and-hold circuits not in use | IAVCC | | 0.9 | 1.8 | mA | During A/D conversion (Sample-and-hold circuits not in use) | 46 |
| Analog power supply current during D/A conversion | IAVCC | | 0.4 | 0.9 | mA | During D/A conversion | 46 |
| Analog power supply current waiting for A/D and D/A conversion (all units) | IAVCC | | | 0.4 | μA | Waiting for A/D and D/A conversion (all units) | 46 |
| Reference power supply current during A/D conversion | IREFH0 | | 80 | 130 | μA | During A/D conversion | 46 |
| Reference power supply current waiting for A/D conversion (all units) | IREFH0 | | | 60 | nA | Waiting for A/D conversion (all units) | 46 |
| Comparator C operating current, per channel | ICMP | | 40 | 60 | μA | Comparator enabled (per channel) | 46 |
| Power-on VCC rising gradient at normal startup | SrVCC | 0.02 | | 20 | ms/V | At normal startup | 46 |
| Power-on VCC rising gradient, voltage monitoring 0 reset enabled at startup | | 0.02 | | | ms/V | Voltage monitoring 0 reset enabled at startup | 46 |
| Allowable ripple frequency fr(VCC) | fr (VCC) | | | 10 | kHz | Figure 5.3 | 47 |
| Allowable ripple frequency fr(VCC) | fr (VCC) | | | 1 | MHz | Figure 5.3 | 47 |
| Allowable ripple frequency fr(VCC) | fr (VCC) | | | 10 | MHz | Figure 5.3 | 47 |
| Allowable voltage change rising/falling gradient | dt/dVCC | 1 | | | ms/V | When VCC change exceeds VCC ±10% | 47 |
| Permissible error of VCL pin external capacitance | CVCL | 3.3 | 4.7 | 6.1 | μF | | 47 |
| Permissible output low current, large current ports (ports 71 to 76, port B5, port D3) | IOL | | | 10 | mA | | 47 |
| Permissible output low current, ports other than large current ports, normal output mode | IOL | | | 4 | mA | Normal output mode | 47 |
| Permissible output low current, ports other than large current ports, high-drive output mode | IOL | | | 8 | mA | High-drive output mode | 47 |
| Permissible output low current, total of all output pins | IOL | | | 110 | mA | | 47 |
| Permissible output high current, large current ports (ports 71 to 76, port B5, port D3) | IOH | | | -5 | mA | | 47 |
| Permissible output high current, ports other than large current ports, normal output mode | IOH | | | -4 | mA | Normal output mode | 47 |
| Permissible output high current, ports other than large current ports, high-drive output mode | IOH | | | -8 | mA | High-drive output mode | 47 |
| Permissible output high current, total of all output pins | IOH | | | -35 | mA | | 47 |
| Output low voltage, large current ports (ports 71 to 76, port B5, port D3) | VOL | | | 0.8 | V | IOL = 10.0mA | 48 |
| Output low voltage, RIIC pins, standard mode | VOL | | | 0.4 | V | IOL = 3.0mA | 48 |
| Output low voltage, ports other than above, normal output mode | VOL | | | 0.8 | V | IOL = 1.0mA | 48 |
## CAD (KiCad official)
- Symbol: `R5F523T3ADFL#30`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `r5f523t3adfl-30-etched.step` / `r5f523t3adfl-30-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `r5f523t3adfl-30.step` / `r5f523t3adfl-30.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](https://www.renesas.com/us/en/document/dst/rx23t-group-datasheet-rev110) (98 pp, sha256 `58681e257aeabc3e`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/r5f523t3adfl-30-datasheet.pdf)