main
Ray
Publish 0.1.0
d47a1aa
R5F52106BDFM#30
RENESAS · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
R5F52106BDFM#30 from RENESAS, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P03 | bidirectional | 5-V tolerant general I/O port P03 that also serves as D/A converter output DA0. |
| 2 | VCL | passive | Connect to VSS via a 0.1 μF smoothing capacitor placed close to the pin to stabilize the internal power supply. |
| 3 | MD | input | Operating mode setting pin whose signal level must not be changed during operation. |
| 4 | XCIN | input | Sub-clock oscillator input; connect a crystal resonator between XCIN and XCOUT. |
| 5 | XCOUT | output | Sub-clock oscillator output; connect a crystal resonator between XCIN and XCOUT. |
| 6 | RES# | input | Reset pin; the LSI enters the reset state when this signal goes low. |
| 7 | P37/XTAL | output | Crystal resonator connection (XTAL output) shared with I/O port P37. |
| 8 | VSS | power_in | Ground pin; connect to the system power supply at 0 V. |
| 9 | P36/EXTAL | input | External clock input (EXTAL) shared with I/O port P36. |
| 10 | VCC | power_in | Power supply pin; connect to the system power supply, operating from 1.62 V to 5.5 V. |
| 11 | P35/NMI | input | Input port P35 that also serves as the non-maskable interrupt request pin NMI. |
| 12 | P32 | bidirectional | I/O port P32 with MTIOC0C/TMO3, TXD6/SMOSI6/SSDA6 and IRQ2-DS/RTCOUT/RTCIC2 alternate functions. |
| 13 | P31 | bidirectional | I/O port P31 with MTIOC4D/TMCI2, CTS1#/RTS1#/SS1# and IRQ1-DS/RTCIC1 alternate functions. |
| 14 | P30 | bidirectional | I/O port P30 with MTIOC4B/TMRI3/POE8#, RXD1/SMISO1/SSCL1 and IRQ0-DS/RTCIC0 alternate functions. |
| 15 | P27 | bidirectional | I/O port P27 with CS3# (MTIOC2B/TMCI3) and SCK1 alternate functions. |
| 16 | P26 | bidirectional | I/O port P26 with CS2# (MTIOC2A/TMO1) and TXD1/SMOSI1/SSDA1 alternate functions. |
| 17 | P17 | bidirectional | I/O port P17 with MTIOC3A/MTIOC3B/TMO1/POE8#, SCK1/MISOA/SDA-DS and IRQ7 alternate functions. |
| 18 | P16 | bidirectional | I/O port P16 with MTIOC3C/MTIOC3D/TMO2, TXD1/SMOSI1/SSDA1/MOSIA/SCL-DS and IRQ6/RTCOUT/ADTRG0# alternate functions. |
| 19 | P15 | bidirectional | I/O port P15 with MTIOC0B/MTCLKB/TMCI2, RXD1/SMISO1/SSCL1 and IRQ5 alternate functions. |
| 20 | P14 | bidirectional | I/O port P14 with MTIOC3A/MTCLKA/TMRI2, CTS1#/RTS1#/SS1# and IRQ4 alternate functions. |
| 21 | PH3 | bidirectional | I/O port PH3 with TMCI0 alternate function. |
| 22 | PH2 | bidirectional | I/O port PH2 with TMRI0 and IRQ1 alternate functions. |
| 23 | PH1 | bidirectional | I/O port PH1 with TMO0 and IRQ0 alternate functions. |
| 24 | PH0 | bidirectional | I/O port PH0 with CACREF alternate function. |
| 25 | P55 | bidirectional | I/O port P55 with MTIOC4D/TMO3 alternate functions. |
| 26 | P54 | bidirectional | I/O port P54 with MTIOC4B/TMCI1 alternate functions. |
| 27 | PC7 | bidirectional | I/O port PC7 with MTIOC3A/TMO2/MTCLKB, TXD8/SMOSI8/SSDA8/MISOA and CACREF alternate functions. |
| 28 | PC6 | bidirectional | I/O port PC6 with MTIOC3C/MTCLKA/TMCI2 and RXD8/SMISO8/SSCL8/MOSIA alternate functions. |
| 29 | PC5 | bidirectional | I/O port PC5 with MTIOC3B/MTCLKD/TMRI2 and SCK8/RSPCKA alternate functions. |
| 30 | PC4 | bidirectional | I/O port PC4 with MTIOC3D/MTCLKC/TMCI1/POE0# and SCK5/CTS8#/RTS8#/SS8#/SSLA0 alternate functions. |
| 31 | PC3 | bidirectional | I/O port PC3 with MTIOC4D and TXD5/SMOSI5/SSDA5 alternate functions. |
| 32 | PC2 | bidirectional | I/O port PC2 with MTIOC4B and RXD5/SMISO5/SSCL5/SSLA3 alternate functions. |
| 33 | PB7 | bidirectional | I/O port PB7 with MTIOC3B and TXD9/SMOSI9/SSDA9 alternate functions. |
| 34 | PB6 | bidirectional | I/O port PB6 with MTIOC3D and RXD9/SMISO9/SSCL9 alternate functions. |
| 35 | PB5 | bidirectional | I/O port PB5 with MTIOC2A/MTIOC1B/TMRI1/POE1# and SCK9 alternate functions. |
| 36 | PB3 | bidirectional | I/O port PB3 with MTIOC0A/MTIOC4A/TMO0/POE3# and SCK6 alternate functions. |
| 37 | PB1 | bidirectional | I/O port PB1 with MTIOC0C/MTIOC4C/TMCI0, TXD6/SMOSI6/SSDA6 and IRQ4-DS alternate functions. |
| 38 | VCC | power_in | Power supply pin; connect to the system power supply, operating from 1.62 V to 5.5 V. |
| 39 | PB0 | bidirectional | I/O port PB0 with MTIC5W, RXD6/SMISO6/SSCL6/RSPCKA alternate functions. |
| 40 | VSS | power_in | Ground pin; connect to the system power supply at 0 V. |
| 41 | PA6 | bidirectional | I/O port PA6 with MTIC5V/MTCLKB/TMCI3/POE2#, CTS5#/RTS5#/SS5# and MOSIA alternate functions. |
| 42 | PA4 | bidirectional | I/O port PA4 with MTIC5U/MTCLKA/TMRI0, TXD5/SMOSI5/SSDA5/SSLA0 and IRQ5-DS/CVREFB1 alternate functions. |
| 43 | PA3 | bidirectional | I/O port PA3 with MTIOC0D/MTCLKD, RXD5/SMISO5/SSCL5 and IRQ6-DS/CMPB1 alternate functions. |
| 44 | PA1 | bidirectional | I/O port PA1 with MTIOC0B/MTCLKC, SCK5/SSLA2 and CVREFA alternate functions. |
| 45 | PA0 | bidirectional | I/O port PA0 with MTIOC4A, SSLA1 and CACREF alternate functions. |
| 46 | PE5 | bidirectional | I/O port PE5 with MTIOC4C/MTIOC2B, IRQ5 and AN013 alternate functions. |
| 47 | PE4 | bidirectional | I/O port PE4 with MTIOC4D/MTIOC1A, AN012 and CMPA2 alternate functions. |
| 48 | PE3 | bidirectional | I/O port PE3 with MTIOC4B/POE8#, CTS12#/RTS12#/SS12# and AN011/CMPA1 alternate functions. |
| 49 | PE2 | bidirectional | I/O port PE2 with MTIOC4A, RXD12/RXDX12/SMISO12/SSCL12, IRQ7-DS, AN010 and CVREFB0 alternate functions. |
| 50 | PE1 | bidirectional | I/O port PE1 with MTIOC4C, TXD12/TXDX12/SIOX12/SMOSI12/SSDA12, AN009 and CMPB0 alternate functions. |
| 51 | PE0 | bidirectional | I/O port PE0 with SCK12 and AN008 alternate functions. |
| 52 | VREFL | power_in | Analog ground pin for the D/A converter; connect to VSS if the D/A converter is not used. |
| 53 | P46 | bidirectional | I/O port P46 that also serves as analog input AN006 of the 12-bit A/D converter. |
| 54 | VREFH | power_in | Analog voltage supply pin for the D/A converter; connect to VCC if the D/A converter is not used. |
| 55 | P44 | bidirectional | I/O port P44 that also serves as analog input AN004 of the 12-bit A/D converter. |
| 56 | P43 | bidirectional | I/O port P43 that also serves as analog input AN003 of the 12-bit A/D converter. |
| 57 | P42 | bidirectional | I/O port P42 that also serves as analog input AN002 of the 12-bit A/D converter. |
| 58 | P41 | bidirectional | I/O port P41 that also serves as analog input AN001 of the 12-bit A/D converter. |
| 59 | VREFL0 | power_in | Analog reference ground pin for the 12-bit A/D converter; connect to VSS if the A/D converter is not used. |
| 60 | P40 | bidirectional | I/O port P40 that also serves as analog input AN000 of the 12-bit A/D converter. |
| 61 | VREFH0 | power_in | Analog reference voltage supply pin for the 12-bit A/D converter; connect to VCC if the A/D converter is not used. |
| 62 | AVCC0 | power_in | Analog voltage supply pin for the 12-bit A/D converter; connect to VCC if the A/D converter is not used. |
| 63 | P05 | bidirectional | I/O port P05 that also serves as D/A converter output DA1. |
| 64 | AVSS0 | power_in | Analog ground pin for the 12-bit A/D converter; connect to VSS if the A/D converter is not used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.3 | 6.5 | V | VSS = AVSS0 = VREFL = VREFL0 = 0 V | 87 | |
| Input voltage (ports for 5 V tolerant) | Vin | -0.3 | 6.5 | V | 87 | ||
| Input voltage (except for ports for 5 V tolerant) | Vin | -0.3 | V | 87 | |||
| Reference power supply voltage VREFH, VREFH0 | VREFH | -0.3 | V | 87 | |||
| Analog power supply voltage | AVCC0 | -0.3 | 6.5 | V | 87 | ||
| Analog input voltage | VAN | -0.3 | V | 87 | |||
| Operating temperature | Topr | -40 | 105 | °C | 87 | ||
| Storage temperature | Tstg | -55 | 125 | °C | 87 | ||
| Schmitt trigger input voltage RIIC input pin (except SMBus, 5 V tolerant) | VIH | 5.8 | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 | ||
| Schmitt trigger input voltage Ports 12, 13, 16, and 17 (5 V tolerant) | VIH | 5.8 | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 | ||
| Schmitt trigger input voltage RIIC input pin (except SMBus) | VIL | -0.3 | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 | ||
| Schmitt trigger input voltage other than RIIC input pin | VIL | -0.3 | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 | ||
| Input level voltage RIIC input pin (SMBus) | VIH | 2.1 | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 | ||
| Input level voltage RIIC input pin (SMBus) | VIL | -0.3 | 0.8 | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 | |
| Input level voltage MD pin | VIL | -0.3 | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 | ||
| Input level voltage EXTAL, WAIT# | VIL | -0.3 | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 | ||
| Input level voltage D0 to D15 | VIL | -0.3 | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 | ||
| Schmitt trigger input voltage all input pins | VIL | -0.3 | V | VCC = AVCC0 = 1.62 to 2.7 V | 88 | ||
| Input leakage current RES#, MD pin, P35/NMI | Iin | 1 | µA | Vin = 0 V, VCC | 89 | ||
| Three-state leakage current (off-state) Port 4 | ITSI | 1 | µA | Vin = 0 V, VCC | 89 | ||
| Three-state leakage current (off-state) other pins except ports for 5 V tolerant and port 4 | ITSI | 0.2 | µA | 89 | |||
| Three-state leakage current (off-state) ports for 5 V tolerant | ITSI | 1 | µA | Vin = 0 V, 5.8 V | 89 | ||
| Input capacitance all input pins (except ports 12, 13, 16, 17, 4, A1, A3, A4, and E) | Cin | 15 | pF | Vin = 0 V, f = 1 MHz, Ta = 25°C | 89 | ||
| Input capacitance ports 12, 13, 16, 17, 4, A1, A3, A4, and E | Cin | 30 | pF | Vin = 0 V, f = 1 MHz, Ta = 25°C | 89 | ||
| Input pull-up MOS current (all ports except port 35), VCC 1.62 to 2.7 V | Ip | -150 | -5 | µA | Vin = 0 V | 89 | |
| Input pull-up MOS current (all ports except port 35), VCC 2.7 to 4.0 V | Ip | -200 | -10 | µA | Vin = 0 V | 89 | |
| Input pull-up MOS current (all ports except port 35), VCC 4.0 to 5.5 V | Ip | -400 | -50 | µA | Vin = 0 V | 89 | |
| Supply current high-speed operating mode, normal operating mode, all peripheral operation: Max. | ICC | 45 | mA | ICLK = 50 MHz | 105 | ||
| Supply current middle-speed operating modes 1A and 1B, normal operating mode, all peripheral operation: Max. | ICC | 35 | mA | ICLK = 32 MHz | 106 | ||
| Supply current middle-speed operating modes 2A and 2B, normal operating mode, all peripheral operation: Max. | ICC | 34 | mA | ICLK = 32 MHz | 106 | ||
| Supply current low-speed operating mode 1, normal operating mode, all peripheral operation: Max. | ICC | 12 | mA | ICLK = 8 MHz | 107 | ||
| Supply current low-speed operating mode 2, normal operating mode, all peripheral operation: Max. | ICC | 3 | mA | ICLK = 32 kHz | 107 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Packing, Terminal material (Pb-free) #3 : Tray/Sn (Tin) only | 12 |
CAD (KiCad official)
- Symbol:
R5F52106BDFM#30 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
r5f52106bdfm-30-etched.step/r5f52106bdfm-30-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f52106bdfm-30.step/r5f52106bdfm-30.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (223 pp, sha256
85c534c775457339, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# R5F52106BDFM#30
**RENESAS** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
R5F52106BDFM#30 from RENESAS, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P03 | bidirectional | 5-V tolerant general I/O port P03 that also serves as D/A converter output DA0. |
| 2 | VCL | passive | Connect to VSS via a 0.1 μF smoothing capacitor placed close to the pin to stabilize the internal power supply. |
| 3 | MD | input | Operating mode setting pin whose signal level must not be changed during operation. |
| 4 | XCIN | input | Sub-clock oscillator input; connect a crystal resonator between XCIN and XCOUT. |
| 5 | XCOUT | output | Sub-clock oscillator output; connect a crystal resonator between XCIN and XCOUT. |
| 6 | RES# | input | Reset pin; the LSI enters the reset state when this signal goes low. |
| 7 | P37/XTAL | output | Crystal resonator connection (XTAL output) shared with I/O port P37. |
| 8 | VSS | power_in | Ground pin; connect to the system power supply at 0 V. |
| 9 | P36/EXTAL | input | External clock input (EXTAL) shared with I/O port P36. |
| 10 | VCC | power_in | Power supply pin; connect to the system power supply, operating from 1.62 V to 5.5 V. |
| 11 | P35/NMI | input | Input port P35 that also serves as the non-maskable interrupt request pin NMI. |
| 12 | P32 | bidirectional | I/O port P32 with MTIOC0C/TMO3, TXD6/SMOSI6/SSDA6 and IRQ2-DS/RTCOUT/RTCIC2 alternate functions. |
| 13 | P31 | bidirectional | I/O port P31 with MTIOC4D/TMCI2, CTS1#/RTS1#/SS1# and IRQ1-DS/RTCIC1 alternate functions. |
| 14 | P30 | bidirectional | I/O port P30 with MTIOC4B/TMRI3/POE8#, RXD1/SMISO1/SSCL1 and IRQ0-DS/RTCIC0 alternate functions. |
| 15 | P27 | bidirectional | I/O port P27 with CS3# (MTIOC2B/TMCI3) and SCK1 alternate functions. |
| 16 | P26 | bidirectional | I/O port P26 with CS2# (MTIOC2A/TMO1) and TXD1/SMOSI1/SSDA1 alternate functions. |
| 17 | P17 | bidirectional | I/O port P17 with MTIOC3A/MTIOC3B/TMO1/POE8#, SCK1/MISOA/SDA-DS and IRQ7 alternate functions. |
| 18 | P16 | bidirectional | I/O port P16 with MTIOC3C/MTIOC3D/TMO2, TXD1/SMOSI1/SSDA1/MOSIA/SCL-DS and IRQ6/RTCOUT/ADTRG0# alternate functions. |
| 19 | P15 | bidirectional | I/O port P15 with MTIOC0B/MTCLKB/TMCI2, RXD1/SMISO1/SSCL1 and IRQ5 alternate functions. |
| 20 | P14 | bidirectional | I/O port P14 with MTIOC3A/MTCLKA/TMRI2, CTS1#/RTS1#/SS1# and IRQ4 alternate functions. |
| 21 | PH3 | bidirectional | I/O port PH3 with TMCI0 alternate function. |
| 22 | PH2 | bidirectional | I/O port PH2 with TMRI0 and IRQ1 alternate functions. |
| 23 | PH1 | bidirectional | I/O port PH1 with TMO0 and IRQ0 alternate functions. |
| 24 | PH0 | bidirectional | I/O port PH0 with CACREF alternate function. |
| 25 | P55 | bidirectional | I/O port P55 with MTIOC4D/TMO3 alternate functions. |
| 26 | P54 | bidirectional | I/O port P54 with MTIOC4B/TMCI1 alternate functions. |
| 27 | PC7 | bidirectional | I/O port PC7 with MTIOC3A/TMO2/MTCLKB, TXD8/SMOSI8/SSDA8/MISOA and CACREF alternate functions. |
| 28 | PC6 | bidirectional | I/O port PC6 with MTIOC3C/MTCLKA/TMCI2 and RXD8/SMISO8/SSCL8/MOSIA alternate functions. |
| 29 | PC5 | bidirectional | I/O port PC5 with MTIOC3B/MTCLKD/TMRI2 and SCK8/RSPCKA alternate functions. |
| 30 | PC4 | bidirectional | I/O port PC4 with MTIOC3D/MTCLKC/TMCI1/POE0# and SCK5/CTS8#/RTS8#/SS8#/SSLA0 alternate functions. |
| 31 | PC3 | bidirectional | I/O port PC3 with MTIOC4D and TXD5/SMOSI5/SSDA5 alternate functions. |
| 32 | PC2 | bidirectional | I/O port PC2 with MTIOC4B and RXD5/SMISO5/SSCL5/SSLA3 alternate functions. |
| 33 | PB7 | bidirectional | I/O port PB7 with MTIOC3B and TXD9/SMOSI9/SSDA9 alternate functions. |
| 34 | PB6 | bidirectional | I/O port PB6 with MTIOC3D and RXD9/SMISO9/SSCL9 alternate functions. |
| 35 | PB5 | bidirectional | I/O port PB5 with MTIOC2A/MTIOC1B/TMRI1/POE1# and SCK9 alternate functions. |
| 36 | PB3 | bidirectional | I/O port PB3 with MTIOC0A/MTIOC4A/TMO0/POE3# and SCK6 alternate functions. |
| 37 | PB1 | bidirectional | I/O port PB1 with MTIOC0C/MTIOC4C/TMCI0, TXD6/SMOSI6/SSDA6 and IRQ4-DS alternate functions. |
| 38 | VCC | power_in | Power supply pin; connect to the system power supply, operating from 1.62 V to 5.5 V. |
| 39 | PB0 | bidirectional | I/O port PB0 with MTIC5W, RXD6/SMISO6/SSCL6/RSPCKA alternate functions. |
| 40 | VSS | power_in | Ground pin; connect to the system power supply at 0 V. |
| 41 | PA6 | bidirectional | I/O port PA6 with MTIC5V/MTCLKB/TMCI3/POE2#, CTS5#/RTS5#/SS5# and MOSIA alternate functions. |
| 42 | PA4 | bidirectional | I/O port PA4 with MTIC5U/MTCLKA/TMRI0, TXD5/SMOSI5/SSDA5/SSLA0 and IRQ5-DS/CVREFB1 alternate functions. |
| 43 | PA3 | bidirectional | I/O port PA3 with MTIOC0D/MTCLKD, RXD5/SMISO5/SSCL5 and IRQ6-DS/CMPB1 alternate functions. |
| 44 | PA1 | bidirectional | I/O port PA1 with MTIOC0B/MTCLKC, SCK5/SSLA2 and CVREFA alternate functions. |
| 45 | PA0 | bidirectional | I/O port PA0 with MTIOC4A, SSLA1 and CACREF alternate functions. |
| 46 | PE5 | bidirectional | I/O port PE5 with MTIOC4C/MTIOC2B, IRQ5 and AN013 alternate functions. |
| 47 | PE4 | bidirectional | I/O port PE4 with MTIOC4D/MTIOC1A, AN012 and CMPA2 alternate functions. |
| 48 | PE3 | bidirectional | I/O port PE3 with MTIOC4B/POE8#, CTS12#/RTS12#/SS12# and AN011/CMPA1 alternate functions. |
| 49 | PE2 | bidirectional | I/O port PE2 with MTIOC4A, RXD12/RXDX12/SMISO12/SSCL12, IRQ7-DS, AN010 and CVREFB0 alternate functions. |
| 50 | PE1 | bidirectional | I/O port PE1 with MTIOC4C, TXD12/TXDX12/SIOX12/SMOSI12/SSDA12, AN009 and CMPB0 alternate functions. |
| 51 | PE0 | bidirectional | I/O port PE0 with SCK12 and AN008 alternate functions. |
| 52 | VREFL | power_in | Analog ground pin for the D/A converter; connect to VSS if the D/A converter is not used. |
| 53 | P46 | bidirectional | I/O port P46 that also serves as analog input AN006 of the 12-bit A/D converter. |
| 54 | VREFH | power_in | Analog voltage supply pin for the D/A converter; connect to VCC if the D/A converter is not used. |
| 55 | P44 | bidirectional | I/O port P44 that also serves as analog input AN004 of the 12-bit A/D converter. |
| 56 | P43 | bidirectional | I/O port P43 that also serves as analog input AN003 of the 12-bit A/D converter. |
| 57 | P42 | bidirectional | I/O port P42 that also serves as analog input AN002 of the 12-bit A/D converter. |
| 58 | P41 | bidirectional | I/O port P41 that also serves as analog input AN001 of the 12-bit A/D converter. |
| 59 | VREFL0 | power_in | Analog reference ground pin for the 12-bit A/D converter; connect to VSS if the A/D converter is not used. |
| 60 | P40 | bidirectional | I/O port P40 that also serves as analog input AN000 of the 12-bit A/D converter. |
| 61 | VREFH0 | power_in | Analog reference voltage supply pin for the 12-bit A/D converter; connect to VCC if the A/D converter is not used. |
| 62 | AVCC0 | power_in | Analog voltage supply pin for the 12-bit A/D converter; connect to VCC if the A/D converter is not used. |
| 63 | P05 | bidirectional | I/O port P05 that also serves as D/A converter output DA1. |
| 64 | AVSS0 | power_in | Analog ground pin for the 12-bit A/D converter; connect to VSS if the A/D converter is not used. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | -0.3 | | 6.5 | V | VSS = AVSS0 = VREFL = VREFL0 = 0 V | 87 |
| Input voltage (ports for 5 V tolerant) | Vin | -0.3 | | 6.5 | V | | 87 |
| Input voltage (except for ports for 5 V tolerant) | Vin | -0.3 | | | V | | 87 |
| Reference power supply voltage VREFH, VREFH0 | VREFH | -0.3 | | | V | | 87 |
| Analog power supply voltage | AVCC0 | -0.3 | | 6.5 | V | | 87 |
| Analog input voltage | VAN | -0.3 | | | V | | 87 |
| Operating temperature | Topr | -40 | | 105 | °C | | 87 |
| Storage temperature | Tstg | -55 | | 125 | °C | | 87 |
| Schmitt trigger input voltage RIIC input pin (except SMBus, 5 V tolerant) | VIH | | | 5.8 | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 |
| Schmitt trigger input voltage Ports 12, 13, 16, and 17 (5 V tolerant) | VIH | | | 5.8 | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 |
| Schmitt trigger input voltage RIIC input pin (except SMBus) | VIL | -0.3 | | | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 |
| Schmitt trigger input voltage other than RIIC input pin | VIL | -0.3 | | | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 |
| Input level voltage RIIC input pin (SMBus) | VIH | 2.1 | | | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 |
| Input level voltage RIIC input pin (SMBus) | VIL | -0.3 | | 0.8 | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 |
| Input level voltage MD pin | VIL | -0.3 | | | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 |
| Input level voltage EXTAL, WAIT# | VIL | -0.3 | | | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 |
| Input level voltage D0 to D15 | VIL | -0.3 | | | V | VCC = AVCC0 = 2.7 to 5.5 V | 88 |
| Schmitt trigger input voltage all input pins | VIL | -0.3 | | | V | VCC = AVCC0 = 1.62 to 2.7 V | 88 |
| Input leakage current RES#, MD pin, P35/NMI | Iin | | | 1 | µA | Vin = 0 V, VCC | 89 |
| Three-state leakage current (off-state) Port 4 | ITSI | | | 1 | µA | Vin = 0 V, VCC | 89 |
| Three-state leakage current (off-state) other pins except ports for 5 V tolerant and port 4 | ITSI | | | 0.2 | µA | | 89 |
| Three-state leakage current (off-state) ports for 5 V tolerant | ITSI | | | 1 | µA | Vin = 0 V, 5.8 V | 89 |
| Input capacitance all input pins (except ports 12, 13, 16, 17, 4, A1, A3, A4, and E) | Cin | | | 15 | pF | Vin = 0 V, f = 1 MHz, Ta = 25°C | 89 |
| Input capacitance ports 12, 13, 16, 17, 4, A1, A3, A4, and E | Cin | | | 30 | pF | Vin = 0 V, f = 1 MHz, Ta = 25°C | 89 |
| Input pull-up MOS current (all ports except port 35), VCC 1.62 to 2.7 V | Ip | -150 | | -5 | µA | Vin = 0 V | 89 |
| Input pull-up MOS current (all ports except port 35), VCC 2.7 to 4.0 V | Ip | -200 | | -10 | µA | Vin = 0 V | 89 |
| Input pull-up MOS current (all ports except port 35), VCC 4.0 to 5.5 V | Ip | -400 | | -50 | µA | Vin = 0 V | 89 |
| Supply current high-speed operating mode, normal operating mode, all peripheral operation: Max. | ICC | | | 45 | mA | ICLK = 50 MHz | 105 |
| Supply current middle-speed operating modes 1A and 1B, normal operating mode, all peripheral operation: Max. | ICC | | | 35 | mA | ICLK = 32 MHz | 106 |
| Supply current middle-speed operating modes 2A and 2B, normal operating mode, all peripheral operation: Max. | ICC | | | 34 | mA | ICLK = 32 MHz | 106 |
| Supply current low-speed operating mode 1, normal operating mode, all peripheral operation: Max. | ICC | | | 12 | mA | ICLK = 8 MHz | 107 |
| Supply current low-speed operating mode 2, normal operating mode, all peripheral operation: Max. | ICC | | | 3 | mA | ICLK = 32 kHz | 107 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Packing, Terminal material (Pb-free) #3 : Tray/Sn (Tin) only | 12 |
## CAD (KiCad official)
- Symbol: `R5F52106BDFM#30`
- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`
- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `r5f52106bdfm-30-etched.step` / `r5f52106bdfm-30-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `r5f52106bdfm-30.step` / `r5f52106bdfm-30.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/r5f52106bdfm-30-datasheet.pdf) (223 pp, sha256 `85c534c775457339`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/r5f52106bdfm-30-datasheet.pdf)