component
R5F51403AGFJ#30
Public Made by Adomby adom
RENESAS Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
f8a888d
R5F51403AGFJ#30
RENESAS · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)
R5F51403AGFJ#30 from RENESAS, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PG7/MD | input | Operating mode control pin MD (Schmitt input, VIH 0.8×VCC) shared with I/O port PG7 and FINED (FINE interface). |
| 2 | RES# | input | Reset input; the MCU enters the reset state when this signal goes low. |
| 3 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 4 | P36/EXTAL | bidirectional | Port P36 or EXTAL external clock/crystal input (main clock 1 to 20 MHz), also IRQ2. |
| 5 | VCC | power_in | Power supply pin, 1.8 V to 5.5 V; connect to the system power supply with a 0.1 µF bypass capacitor. |
| 6 | P35 | input | Input-only port P35 shared with the non-maskable interrupt request pin NMI. |
| 7 | P31 | bidirectional | Port P31 with MTIOC4D, TMCI2, CTS1#/RTS1#/SS1# and IRQ1 functions. |
| 8 | P30 | bidirectional | Port P30 with MTIOC4B, TMRI3, POE8#, RXD1/SMISO1/SSCL1 and IRQ0 functions. |
| 9 | P27 | bidirectional | Port P27 with MTIOC2B, TMCI3, SCK1 and touch pin TS3. |
| 10 | P26 | bidirectional | Port P26 with MTIOC2A, TMO1, LPTO, TXD1/SMOSI1/SSDA1 and touch pin TS4. |
| 11 | P17 | bidirectional | 5-V tolerant port P17 with MTIOC3A/3B, TMO1, POE8#, SCK1/MISOA/SDA0 and IRQ7. |
| 12 | P16 | bidirectional | 5-V tolerant port P16 with MTIOC3C/3D, TMO2, TXD1/SMOSI1/SSDA1/MOSIA/SCL0, IRQ6, ADTRG0# and RTCOUT. |
| 13 | PC7 | bidirectional | Port PC7 with MTIOC3A, MTCLKB, TMO2, LPTO, MISOA, touch pin TS13 and CACREF. |
| 14 | PC6 | bidirectional | Port PC6 with MTIOC3C, MTCLKA, TMCI2, MOSIA and touch pin TS14. |
| 15 | PC5 | bidirectional | Port PC5 with MTIOC0C/3B, MTCLKD, TMRI2, RSPCKA and touch pin TS15. |
| 16 | PC4 | bidirectional | Port PC4 with MTIOC0A/3D, MTCLKC, TMCI1, POE0#, SCK5/SSLA0 and TSCAP (touch decoupling capacitor, 10 nF to VSS). |
| 17 | VCC | power_in | Power supply pin, 1.8 V to 5.5 V; connect to the system power supply with a 0.1 µF bypass capacitor. |
| 18 | PB0 | bidirectional | Port PB0 with MTIOC3D, MTIC5W, RSPCKA and touch pin TS25. |
| 19 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 20 | PA4 | bidirectional | Port PA4 with MTIOC4C, MTIC5U, MTCLKA, TMRI0, TXD5/SMOSI5/SSDA5/SSLA0, TS28, IRQ5 and CVREFB1. |
| 21 | PA3 | bidirectional | Port PA3 with MTIOC0D/4D, MTIC5V, MTCLKD, RXD5/SMISO5/SSCL5, TS29, IRQ6 and CMPB1. |
| 22 | PA1 | bidirectional | Port PA1 with MTIOC0B/3B, MTCLKC, SCK5/SSLA2 and touch pin TS31. |
| 23 | PE4 | bidirectional | Port PE4 with MTIOC1A/4A/4D, touch pin TS33, AN020, CMPA2 and CLKOUT. |
| 24 | PE3 | bidirectional | Port PE3 with MTIOC1B/4B, POE8#, CTS12#/RTS12#, TS34, AN019 and CLKOUT. |
| 25 | PE2 | bidirectional | Port PE2 with MTIOC4A, RXD12/SSCL12/RXDX12, TS35, IRQ7, AN018 and CVREFB0. |
| 26 | PE1 | bidirectional | Port PE1 with MTIOC4C, TXD12/SSDA12/TXDX12/SIOX12, AN017 and CMPB0. |
| 27 | P42 | bidirectional | Port P42 with analog input AN002; I/O buffer powered from AVCC0. |
| 28 | P41 | bidirectional | Port P41 with analog input AN001; I/O buffer powered from AVCC0. |
| 29 | P40 | bidirectional | Port P40 with analog input AN000; I/O buffer powered from AVCC0. |
| 30 | AVCC0/VREFH0 | power_in | Analog supply for the 12-bit A/D and D/A converters and A/D reference voltage (VREFH0 = AVCC0 on 32-pin products); 1.8 V to 5.5 V. |
| 31 | AVSS0/VREFL0 | power_in | Analog ground and A/D reference ground (VREFL0), 0 V. |
| 32 | VCL | passive | Internal voltage-down output; connect to VSS via a 4.7 µF smoothing capacitor placed close to the pin and do not apply supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage (absolute max) | VCC | -0.3 | 6.5 | V | VSS = AVSS0 = VREFL0 = 0 V | 25 | |
| Analog power supply voltage (absolute max) | AVCC0 | -0.3 | 6.5 | V | 25 | ||
| Input voltage, 5 V tolerant ports P12, P13, P16, P17 (absolute max) | Vin | -0.3 | 6.5 | V | 25 | ||
| Input voltage, ports other than 5 V tolerant (absolute max) | Vin | -0.3 | V | Upper limit is VCC + 0.3 (AVCC0 + 0.3 for P03-P07, P40-P47, PJ6, PJ7) | 25 | ||
| Reference power supply voltage (absolute max) | VREFH0 | -0.3 | V | Upper limit is AVCC0 + 0.3 | 25 | ||
| Analog input voltage (absolute max) | VAN | -0.3 | V | Upper limit is AVCC0 + 0.3 (AN000-AN007) or VCC + 0.3 (AN016-AN021, AN024-AN026) | 25 | ||
| Junction temperature, G-version | Tj | -40 | 112 | °C | G-version | 25 | |
| Storage temperature | Tstg | -55 | 125 | °C | 25 | ||
| Power supply voltage | VCC | 1.8 | 5.5 | V | 26 | ||
| Analog power supply voltage | AVCC0 | 1.8 | 5.5 | V | 26 | ||
| Reference power supply voltage | VREFH0 | 1.8 | V | Upper limit is AVCC0 | 26 | ||
| Input voltage, 5 V tolerant ports | Vin | -0.3 | 5.8 | V | P12, P13, P16, P17 | 26 | |
| Operating temperature, G version | Topr | -40 | 105 | °C | G version | 26 | |
| VCL decoupling capacitance | CVCL | -30 | 4.7 | 30 | µF | Tolerance in %; multilayer ceramic capacitor | 26 |
| Input leakage current | /Iin/ | 1 | µA | RES#, P35; Vin = 0 V, VCC | 28 | ||
| Three-state leakage current, 5-V tolerant ports | /ITSI/ | 1 | µA | Vin = 0 V, 5.8 V | 28 | ||
| Three-state leakage current, other ports | /ITSI/ | 0.2 | µA | Other than 5 V tolerant and PJ6, PJ7; Vin = 0 V, VCC | 28 | ||
| Input capacitance, all input pins except P35 | Cin | 15 | pF | Vin = 0 mV, f = 1 MHz, Ta = 25°C | 28 | ||
| Input capacitance, P35 | Cin | 30 | pF | Vin = 0 mV, f = 1 MHz, Ta = 25°C | 28 | ||
| Input pull-up resistor | RU | 10 | 20 | 50 | kΩ | Vin = 0 V | 28 |
| Supply current, high-speed, no peripheral operation | ICC | 2.6 | mA | ICLK = 48 MHz, VCC = 3.3 V | 35 | ||
| Supply current, high-speed, all peripheral operation Normal | ICC | 10.4 | mA | ICLK = 48 MHz, VCC = 3.3 V | 35 | ||
| Supply current, high-speed, all peripheral operation Max. | ICC | 22.8 | mA | ICLK = 48 MHz | 35 | ||
| Supply current, middle-speed, all peripheral operation Max. | ICC | 15.4 | mA | ICLK = 24 MHz | 35 | ||
| Supply current, middle-speed mode 2, all peripheral operation Max. | ICC | 3.3 | mA | ICLK = 1 MHz | 36 | ||
| Supply current, low-speed, all peripheral operation Max. | ICC | 175.4 | µA | ICLK = 32.768 kHz | 36 | ||
| Increase during encryption function operation | ICC | 3.9 | mA | High-speed operating mode | 35 | ||
| Software standby supply current, Ta = 25°C | ICC | 0.43 | 2.07 | µA | Ta = 25°C; typ at VCC = 3.3 V | 43 | |
| Software standby supply current, Ta = 55°C | ICC | 1 | 8.46 | µA | Ta = 55°C | 43 | |
| Software standby supply current, Ta = 85°C | ICC | 3.3 | 31.14 | µA | Ta = 85°C | 43 | |
| Software standby supply current, Ta = 105°C | ICC | 7.76 | 71.36 | µA | Ta = 105°C | 43 | |
| Analog supply current, A/D conversion (high-speed) | IAVCC | 0.6 | 1.3 | mA | During A/D conversion (at high-speed conversion) | 46 | |
| Analog supply current, A/D conversion (low-speed) | IAVCC | 0.3 | 0.7 | mA | During A/D conversion (at low-speed conversion) | 46 | |
| Analog supply current, D/A conversion per channel | IAVCC | 0.5 | mA | During D/A conversion (per channel) | 46 | ||
| Analog supply current, waiting for A/D and D/A | IAVCC | 2 | µA | Waiting for A/D and D/A conversion | 46 | ||
| Reference supply current, A/D conversion | IREFH0 | 49.6 | 120 | µA | During A/D conversion (at high-speed conversion) | 46 | |
| RAM standby voltage | VRAM | 1.8 | V | 46 | |||
| Power-on VCC rising gradient, normal startup | SrVCC | 0.02 | 20 | ms/V | At normal startup | 46 | |
| Power-on VCC rising gradient, fast startup | SrVCC | 0.02 | 2 | ms/V | During fast startup time | 46 | |
| Permissible output low current per pin | IOL | 8 | mA | Average and maximum per pin; Ta = -40 to +105°C | 49 | ||
| Permissible output high current per pin | IOH | -4 | mA | Average and maximum per pin; Ta = -40 to +105°C | 49 | ||
| Permissible total output low current, all output pins | ΣIOL | 60 | mA | Ta = -40 to +105°C | 49 | ||
| Permissible total output high current, all output pins | ΣIOH | -60 | mA | Ta = -40 to +105°C | 49 | ||
| Output low voltage, 1.8 V <= VCC < 2.7 V | VOL | 0.3 | V | IOL = 1.0 mA | 50 | ||
| Output low voltage, 2.7 V <= VCC < 4.0 V | VOL | 0.5 | V | IOL = 2.0 mA | 50 | ||
| Output low voltage RIIC pins, 2.7 V <= VCC < 4.0 V | VOL | 0.6 | V | IOL = 6.0 mA | 50 | ||
| Output low voltage, 4.0 V <= VCC <= 5.5 V | VOL | 0.8 | V | IOL = 4.0 mA | 50 | ||
| Output low voltage RIIC pins, 4.0 V <= VCC <= 5.5 V | VOL | 0.6 | V | IOL = 6.0 mA | 50 | ||
| Thermal resistance, 32-pin LQFP (PLQP0032GB-A) | θja | 62.2 | °C/W | JESD51-2 and JESD51-7 compliant | 50 | ||
| Thermal characterization parameter, 32-pin LQFP (PLQP0032GB-A) | Ψjt | 2.78 | °C/W | JESD51-2 and JESD51-7 compliant | 50 | ||
| Maximum operating frequency, system clock | f | 48 | MHz | High-speed operating mode (ICLK) | 53 | ||
| Main clock oscillator frequency | fMAIN | 1 | 20 | MHz | 54 | ||
| EXTAL external clock input cycle time | tXcyc | 50 | ns | Figure 2.14 | 54 | ||
| LOCO clock oscillation frequency | fLOCO | 3.44 | 4 | 4.56 | MHz | 55 | |
| IWDT-dedicated clock oscillation frequency | fILOCO | 12.75 | 15 | 17.25 | kHz | 55 | |
| HOCO clock frequency (24 MHz) | fHOCO | 23.76 | 24 | 24.24 | MHz | Ta = -40 to +105°C | 56 |
| HOCO clock frequency (32 MHz) | fHOCO | 31.68 | 32 | 32.32 | MHz | Ta = -40 to +105°C | 56 |
| HOCO clock frequency (48 MHz) | fHOCO | 47.52 | 48 | 48.48 | MHz | Ta = -40 to +105°C | 56 |
| HOCO oscillation frequency error | ΔfHOCO | -1 | 1 | % | Ta = -40 to +105°C | 56 | |
| RES# pulse width at power-on | tRESWP | 10.5 | ms | Figure 2.22 | 59 |
CAD (KiCad official)
- Symbol:
R5F51403AGFJ#30 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
r5f51403agfj-30-etched.step/r5f51403agfj-30-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f51403agfj-30.step/r5f51403agfj-30.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (121 pp, sha256
642ffb71319905c5, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# R5F51403AGFJ#30
**RENESAS** · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)
R5F51403AGFJ#30 from RENESAS, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PG7/MD | input | Operating mode control pin MD (Schmitt input, VIH 0.8×VCC) shared with I/O port PG7 and FINED (FINE interface). |
| 2 | RES# | input | Reset input; the MCU enters the reset state when this signal goes low. |
| 3 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 4 | P36/EXTAL | bidirectional | Port P36 or EXTAL external clock/crystal input (main clock 1 to 20 MHz), also IRQ2. |
| 5 | VCC | power_in | Power supply pin, 1.8 V to 5.5 V; connect to the system power supply with a 0.1 µF bypass capacitor. |
| 6 | P35 | input | Input-only port P35 shared with the non-maskable interrupt request pin NMI. |
| 7 | P31 | bidirectional | Port P31 with MTIOC4D, TMCI2, CTS1#/RTS1#/SS1# and IRQ1 functions. |
| 8 | P30 | bidirectional | Port P30 with MTIOC4B, TMRI3, POE8#, RXD1/SMISO1/SSCL1 and IRQ0 functions. |
| 9 | P27 | bidirectional | Port P27 with MTIOC2B, TMCI3, SCK1 and touch pin TS3. |
| 10 | P26 | bidirectional | Port P26 with MTIOC2A, TMO1, LPTO, TXD1/SMOSI1/SSDA1 and touch pin TS4. |
| 11 | P17 | bidirectional | 5-V tolerant port P17 with MTIOC3A/3B, TMO1, POE8#, SCK1/MISOA/SDA0 and IRQ7. |
| 12 | P16 | bidirectional | 5-V tolerant port P16 with MTIOC3C/3D, TMO2, TXD1/SMOSI1/SSDA1/MOSIA/SCL0, IRQ6, ADTRG0# and RTCOUT. |
| 13 | PC7 | bidirectional | Port PC7 with MTIOC3A, MTCLKB, TMO2, LPTO, MISOA, touch pin TS13 and CACREF. |
| 14 | PC6 | bidirectional | Port PC6 with MTIOC3C, MTCLKA, TMCI2, MOSIA and touch pin TS14. |
| 15 | PC5 | bidirectional | Port PC5 with MTIOC0C/3B, MTCLKD, TMRI2, RSPCKA and touch pin TS15. |
| 16 | PC4 | bidirectional | Port PC4 with MTIOC0A/3D, MTCLKC, TMCI1, POE0#, SCK5/SSLA0 and TSCAP (touch decoupling capacitor, 10 nF to VSS). |
| 17 | VCC | power_in | Power supply pin, 1.8 V to 5.5 V; connect to the system power supply with a 0.1 µF bypass capacitor. |
| 18 | PB0 | bidirectional | Port PB0 with MTIOC3D, MTIC5W, RSPCKA and touch pin TS25. |
| 19 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 20 | PA4 | bidirectional | Port PA4 with MTIOC4C, MTIC5U, MTCLKA, TMRI0, TXD5/SMOSI5/SSDA5/SSLA0, TS28, IRQ5 and CVREFB1. |
| 21 | PA3 | bidirectional | Port PA3 with MTIOC0D/4D, MTIC5V, MTCLKD, RXD5/SMISO5/SSCL5, TS29, IRQ6 and CMPB1. |
| 22 | PA1 | bidirectional | Port PA1 with MTIOC0B/3B, MTCLKC, SCK5/SSLA2 and touch pin TS31. |
| 23 | PE4 | bidirectional | Port PE4 with MTIOC1A/4A/4D, touch pin TS33, AN020, CMPA2 and CLKOUT. |
| 24 | PE3 | bidirectional | Port PE3 with MTIOC1B/4B, POE8#, CTS12#/RTS12#, TS34, AN019 and CLKOUT. |
| 25 | PE2 | bidirectional | Port PE2 with MTIOC4A, RXD12/SSCL12/RXDX12, TS35, IRQ7, AN018 and CVREFB0. |
| 26 | PE1 | bidirectional | Port PE1 with MTIOC4C, TXD12/SSDA12/TXDX12/SIOX12, AN017 and CMPB0. |
| 27 | P42 | bidirectional | Port P42 with analog input AN002; I/O buffer powered from AVCC0. |
| 28 | P41 | bidirectional | Port P41 with analog input AN001; I/O buffer powered from AVCC0. |
| 29 | P40 | bidirectional | Port P40 with analog input AN000; I/O buffer powered from AVCC0. |
| 30 | AVCC0/VREFH0 | power_in | Analog supply for the 12-bit A/D and D/A converters and A/D reference voltage (VREFH0 = AVCC0 on 32-pin products); 1.8 V to 5.5 V. |
| 31 | AVSS0/VREFL0 | power_in | Analog ground and A/D reference ground (VREFL0), 0 V. |
| 32 | VCL | passive | Internal voltage-down output; connect to VSS via a 4.7 µF smoothing capacitor placed close to the pin and do not apply supply voltage. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage (absolute max) | VCC | -0.3 | | 6.5 | V | VSS = AVSS0 = VREFL0 = 0 V | 25 |
| Analog power supply voltage (absolute max) | AVCC0 | -0.3 | | 6.5 | V | | 25 |
| Input voltage, 5 V tolerant ports P12, P13, P16, P17 (absolute max) | Vin | -0.3 | | 6.5 | V | | 25 |
| Input voltage, ports other than 5 V tolerant (absolute max) | Vin | -0.3 | | | V | Upper limit is VCC + 0.3 (AVCC0 + 0.3 for P03-P07, P40-P47, PJ6, PJ7) | 25 |
| Reference power supply voltage (absolute max) | VREFH0 | -0.3 | | | V | Upper limit is AVCC0 + 0.3 | 25 |
| Analog input voltage (absolute max) | VAN | -0.3 | | | V | Upper limit is AVCC0 + 0.3 (AN000-AN007) or VCC + 0.3 (AN016-AN021, AN024-AN026) | 25 |
| Junction temperature, G-version | Tj | -40 | | 112 | °C | G-version | 25 |
| Storage temperature | Tstg | -55 | | 125 | °C | | 25 |
| Power supply voltage | VCC | 1.8 | | 5.5 | V | | 26 |
| Analog power supply voltage | AVCC0 | 1.8 | | 5.5 | V | | 26 |
| Reference power supply voltage | VREFH0 | 1.8 | | | V | Upper limit is AVCC0 | 26 |
| Input voltage, 5 V tolerant ports | Vin | -0.3 | | 5.8 | V | P12, P13, P16, P17 | 26 |
| Operating temperature, G version | Topr | -40 | | 105 | °C | G version | 26 |
| VCL decoupling capacitance | CVCL | -30 | 4.7 | 30 | µF | Tolerance in %; multilayer ceramic capacitor | 26 |
| Input leakage current | /Iin/ | | | 1 | µA | RES#, P35; Vin = 0 V, VCC | 28 |
| Three-state leakage current, 5-V tolerant ports | /ITSI/ | | | 1 | µA | Vin = 0 V, 5.8 V | 28 |
| Three-state leakage current, other ports | /ITSI/ | | | 0.2 | µA | Other than 5 V tolerant and PJ6, PJ7; Vin = 0 V, VCC | 28 |
| Input capacitance, all input pins except P35 | Cin | | | 15 | pF | Vin = 0 mV, f = 1 MHz, Ta = 25°C | 28 |
| Input capacitance, P35 | Cin | | | 30 | pF | Vin = 0 mV, f = 1 MHz, Ta = 25°C | 28 |
| Input pull-up resistor | RU | 10 | 20 | 50 | kΩ | Vin = 0 V | 28 |
| Supply current, high-speed, no peripheral operation | ICC | | 2.6 | | mA | ICLK = 48 MHz, VCC = 3.3 V | 35 |
| Supply current, high-speed, all peripheral operation Normal | ICC | | 10.4 | | mA | ICLK = 48 MHz, VCC = 3.3 V | 35 |
| Supply current, high-speed, all peripheral operation Max. | ICC | | | 22.8 | mA | ICLK = 48 MHz | 35 |
| Supply current, middle-speed, all peripheral operation Max. | ICC | | | 15.4 | mA | ICLK = 24 MHz | 35 |
| Supply current, middle-speed mode 2, all peripheral operation Max. | ICC | | | 3.3 | mA | ICLK = 1 MHz | 36 |
| Supply current, low-speed, all peripheral operation Max. | ICC | | | 175.4 | µA | ICLK = 32.768 kHz | 36 |
| Increase during encryption function operation | ICC | | | 3.9 | mA | High-speed operating mode | 35 |
| Software standby supply current, Ta = 25°C | ICC | | 0.43 | 2.07 | µA | Ta = 25°C; typ at VCC = 3.3 V | 43 |
| Software standby supply current, Ta = 55°C | ICC | | 1 | 8.46 | µA | Ta = 55°C | 43 |
| Software standby supply current, Ta = 85°C | ICC | | 3.3 | 31.14 | µA | Ta = 85°C | 43 |
| Software standby supply current, Ta = 105°C | ICC | | 7.76 | 71.36 | µA | Ta = 105°C | 43 |
| Analog supply current, A/D conversion (high-speed) | IAVCC | | 0.6 | 1.3 | mA | During A/D conversion (at high-speed conversion) | 46 |
| Analog supply current, A/D conversion (low-speed) | IAVCC | | 0.3 | 0.7 | mA | During A/D conversion (at low-speed conversion) | 46 |
| Analog supply current, D/A conversion per channel | IAVCC | | | 0.5 | mA | During D/A conversion (per channel) | 46 |
| Analog supply current, waiting for A/D and D/A | IAVCC | | | 2 | µA | Waiting for A/D and D/A conversion | 46 |
| Reference supply current, A/D conversion | IREFH0 | | 49.6 | 120 | µA | During A/D conversion (at high-speed conversion) | 46 |
| RAM standby voltage | VRAM | 1.8 | | | V | | 46 |
| Power-on VCC rising gradient, normal startup | SrVCC | 0.02 | | 20 | ms/V | At normal startup | 46 |
| Power-on VCC rising gradient, fast startup | SrVCC | 0.02 | | 2 | ms/V | During fast startup time | 46 |
| Permissible output low current per pin | IOL | | | 8 | mA | Average and maximum per pin; Ta = -40 to +105°C | 49 |
| Permissible output high current per pin | IOH | -4 | | | mA | Average and maximum per pin; Ta = -40 to +105°C | 49 |
| Permissible total output low current, all output pins | ΣIOL | | | 60 | mA | Ta = -40 to +105°C | 49 |
| Permissible total output high current, all output pins | ΣIOH | -60 | | | mA | Ta = -40 to +105°C | 49 |
| Output low voltage, 1.8 V <= VCC < 2.7 V | VOL | | | 0.3 | V | IOL = 1.0 mA | 50 |
| Output low voltage, 2.7 V <= VCC < 4.0 V | VOL | | | 0.5 | V | IOL = 2.0 mA | 50 |
| Output low voltage RIIC pins, 2.7 V <= VCC < 4.0 V | VOL | | | 0.6 | V | IOL = 6.0 mA | 50 |
| Output low voltage, 4.0 V <= VCC <= 5.5 V | VOL | | | 0.8 | V | IOL = 4.0 mA | 50 |
| Output low voltage RIIC pins, 4.0 V <= VCC <= 5.5 V | VOL | | | 0.6 | V | IOL = 6.0 mA | 50 |
| Thermal resistance, 32-pin LQFP (PLQP0032GB-A) | θja | | | 62.2 | °C/W | JESD51-2 and JESD51-7 compliant | 50 |
| Thermal characterization parameter, 32-pin LQFP (PLQP0032GB-A) | Ψjt | | | 2.78 | °C/W | JESD51-2 and JESD51-7 compliant | 50 |
| Maximum operating frequency, system clock | f | | | 48 | MHz | High-speed operating mode (ICLK) | 53 |
| Main clock oscillator frequency | fMAIN | 1 | | 20 | MHz | | 54 |
| EXTAL external clock input cycle time | tXcyc | 50 | | | ns | Figure 2.14 | 54 |
| LOCO clock oscillation frequency | fLOCO | 3.44 | 4 | 4.56 | MHz | | 55 |
| IWDT-dedicated clock oscillation frequency | fILOCO | 12.75 | 15 | 17.25 | kHz | | 55 |
| HOCO clock frequency (24 MHz) | fHOCO | 23.76 | 24 | 24.24 | MHz | Ta = -40 to +105°C | 56 |
| HOCO clock frequency (32 MHz) | fHOCO | 31.68 | 32 | 32.32 | MHz | Ta = -40 to +105°C | 56 |
| HOCO clock frequency (48 MHz) | fHOCO | 47.52 | 48 | 48.48 | MHz | Ta = -40 to +105°C | 56 |
| HOCO oscillation frequency error | ΔfHOCO | -1 | | 1 | % | Ta = -40 to +105°C | 56 |
| RES# pulse width at power-on | tRESWP | 10.5 | | | ms | Figure 2.22 | 59 |
## CAD (KiCad official)
- Symbol: `R5F51403AGFJ#30`
- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`
- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files: `r5f51403agfj-30-etched.step` / `r5f51403agfj-30-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `r5f51403agfj-30.step` / `r5f51403agfj-30.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](https://www.renesas.com/us/en/document/dst/rx140-group-datasheet-rev100) (121 pp, sha256 `642ffb71319905c5`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/r5f51403agfj-30-datasheet.pdf)