component
R5F513T5AGFJ#10
Public Made by Adomby adom
RENESAS Microcontroller Units (MCUs/MPUs/SOCs), LQFP-32(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
f787973
R5F513T5AGFJ#10
RENESAS · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-32(7x7)
R5F513T5AGFJ#10 from RENESAS, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCL | passive | Connect to VSS via a 4.7 µF smoothing capacitor to stabilize the internal power supply, placed close to the pin. |
| 2 | MD | input | Operating mode setting pin (also FINED, the FINE interface I/O); signal levels must not be changed during operation. |
| 3 | RES# | input | Reset pin; the MCU enters the reset state when this signal goes low. |
| 4 | P37/XTAL | bidirectional | Crystal connection output pin (main clock oscillator) or general I/O port P37; leave open when an external clock is input to EXTAL. |
| 5 | VSS | power_in | Ground pin; connect to the system ground (0 V). |
| 6 | P36/EXTAL | bidirectional | Crystal connection or external clock input pin for the main clock oscillator (20 MHz max external clock), or general I/O port P36. |
| 7 | VCC | power_in | Power supply pin; connect to the system power supply. |
| 8 | PE2 | input | Input-only port PE2 with non-maskable interrupt NMI, IRQ0 and POE10# functions; connect to VCC via pull-up resistor if unused. |
| 9 | PB7 | bidirectional | Port PB7 with MTIOC3C, MTCLKD, RXD1/SMISO1/SSCL1, RXD5/SMISO5/SSCL5 and IRQ5 functions. |
| 10 | PB6 | bidirectional | Port PB6 with MTIOC1B, MTIOC3A, TXD1/SMOSI1/SSDA1 and TXD5/SMOSI5/SSDA5 functions; high-drive output. |
| 11 | PB3 | bidirectional | Port PB3 with MTIOC0A, CACREF, SCK5 and SCK12 functions. |
| 12 | PB2 | bidirectional | Port PB2 with MTIOC0B, MTCLKC, ADSM0, TXD5/SMOSI5/SSDA5 and SDA0 functions; 5-V tolerant, high-drive output. |
| 13 | PB1 | bidirectional | Port PB1 with MTIOC0C, MTIC5W, MTCLKA, RXD5/SMISO5/SSCL5, SCL0 and IRQ2 functions; 5-V tolerant, high-drive output. |
| 14 | PB0 | bidirectional | Port PB0 with MTIOC0D, MTIOC2A, MTCLKB and TXD12/TXDX12/SIOX12/SMOSI12/SSDA12 functions. |
| 15 | P94 | bidirectional | Port P94 with MTIOC2B, MTIC5U, MTCLKA, RXD12/RXDX12/SMISO12/SSCL12 and IRQ1 functions. |
| 16 | P93 | bidirectional | Port P93 with MTIOC1A, MTIC5V, SCK5, SCK12, IRQ0 and ADTRG0# functions. |
| 17 | P76 | bidirectional | Port P76 with MTIOC4D function; high-drive output. |
| 18 | P75 | bidirectional | Port P75 with MTIOC4C function; high-drive output. |
| 19 | P74 | bidirectional | Port P74 with MTIOC3D function; high-drive output. |
| 20 | P73 | bidirectional | Port P73 with MTIOC4B function; high-drive output. |
| 21 | P72 | bidirectional | Port P72 with MTIOC4A function; high-drive output. |
| 22 | P71 | bidirectional | Port P71 with MTIOC3B function; high-drive output. |
| 23 | VCC | power_in | Power supply pin; connect to the system power supply. |
| 24 | VSS | power_in | Ground pin; connect to the system ground (0 V). |
| 25 | P44 | bidirectional | Port P44 with AN004 A/D input and CMPC12 comparator input; I/O buffer powered by AVCC0. |
| 26 | P43 | bidirectional | Port P43 with AN003 A/D input and CMPC02 comparator input; I/O buffer powered by AVCC0. |
| 27 | P42 | bidirectional | Port P42 with AN002 A/D input and CMPC20 comparator input; I/O buffer powered by AVCC0. |
| 28 | P41 | bidirectional | Port P41 with AN001 A/D input and CMPC10 comparator input; I/O buffer powered by AVCC0. |
| 29 | P40 | bidirectional | Port P40 with AN000 A/D input and CMPC00 comparator input; I/O buffer powered by AVCC0. |
| 30 | AVCC0 | power_in | Analog supply for the 12-bit A/D converter, comparator C and 8-bit D/A converter; connect to VCC when these modules are not used. |
| 31 | AVSS0 | power_in | Analog ground for the 12-bit A/D converter, comparator C and 8-bit D/A converter; connect to VSS when these modules are not used. |
| 32 | P11 | bidirectional | Port P11 with MTIOC3A, MTCLKA, POE8#, IRQ1 and CVREFC0 (comparator C reference voltage input) functions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-32(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | 2.7 | 5.5 | V | Single supply, operation at up to 32 MHz | 35 | |
| Operating temperature range (G version) | -40 | 105 | °C | G version | 35 | ||
| Maximum operating frequency | 32 | MHz | VCC = 2.7 to 5.5V | 35 | |||
| High-speed on-chip oscillator accuracy | -1 | 1 | % | High-speed on-chip oscillator 32 MHz ±1% | 32 | ||
| Supply current | 11 | mA | at 32 MHz (typ.) | 35 | |||
| E2 DataFlash erase/write cycles | 1e+06 | cycles | typ. | 33 |
CAD (KiCad official)
- Symbol:
R5F513T5AGFJ#10 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
r5f513t5agfj-10-etched.step/r5f513t5agfj-10-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f513t5agfj-10.step/r5f513t5agfj-10.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (1055 pp, sha256
b57248feedc44923, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# R5F513T5AGFJ#10
**RENESAS** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-32(7x7)
R5F513T5AGFJ#10 from RENESAS, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCL | passive | Connect to VSS via a 4.7 µF smoothing capacitor to stabilize the internal power supply, placed close to the pin. |
| 2 | MD | input | Operating mode setting pin (also FINED, the FINE interface I/O); signal levels must not be changed during operation. |
| 3 | RES# | input | Reset pin; the MCU enters the reset state when this signal goes low. |
| 4 | P37/XTAL | bidirectional | Crystal connection output pin (main clock oscillator) or general I/O port P37; leave open when an external clock is input to EXTAL. |
| 5 | VSS | power_in | Ground pin; connect to the system ground (0 V). |
| 6 | P36/EXTAL | bidirectional | Crystal connection or external clock input pin for the main clock oscillator (20 MHz max external clock), or general I/O port P36. |
| 7 | VCC | power_in | Power supply pin; connect to the system power supply. |
| 8 | PE2 | input | Input-only port PE2 with non-maskable interrupt NMI, IRQ0 and POE10# functions; connect to VCC via pull-up resistor if unused. |
| 9 | PB7 | bidirectional | Port PB7 with MTIOC3C, MTCLKD, RXD1/SMISO1/SSCL1, RXD5/SMISO5/SSCL5 and IRQ5 functions. |
| 10 | PB6 | bidirectional | Port PB6 with MTIOC1B, MTIOC3A, TXD1/SMOSI1/SSDA1 and TXD5/SMOSI5/SSDA5 functions; high-drive output. |
| 11 | PB3 | bidirectional | Port PB3 with MTIOC0A, CACREF, SCK5 and SCK12 functions. |
| 12 | PB2 | bidirectional | Port PB2 with MTIOC0B, MTCLKC, ADSM0, TXD5/SMOSI5/SSDA5 and SDA0 functions; 5-V tolerant, high-drive output. |
| 13 | PB1 | bidirectional | Port PB1 with MTIOC0C, MTIC5W, MTCLKA, RXD5/SMISO5/SSCL5, SCL0 and IRQ2 functions; 5-V tolerant, high-drive output. |
| 14 | PB0 | bidirectional | Port PB0 with MTIOC0D, MTIOC2A, MTCLKB and TXD12/TXDX12/SIOX12/SMOSI12/SSDA12 functions. |
| 15 | P94 | bidirectional | Port P94 with MTIOC2B, MTIC5U, MTCLKA, RXD12/RXDX12/SMISO12/SSCL12 and IRQ1 functions. |
| 16 | P93 | bidirectional | Port P93 with MTIOC1A, MTIC5V, SCK5, SCK12, IRQ0 and ADTRG0# functions. |
| 17 | P76 | bidirectional | Port P76 with MTIOC4D function; high-drive output. |
| 18 | P75 | bidirectional | Port P75 with MTIOC4C function; high-drive output. |
| 19 | P74 | bidirectional | Port P74 with MTIOC3D function; high-drive output. |
| 20 | P73 | bidirectional | Port P73 with MTIOC4B function; high-drive output. |
| 21 | P72 | bidirectional | Port P72 with MTIOC4A function; high-drive output. |
| 22 | P71 | bidirectional | Port P71 with MTIOC3B function; high-drive output. |
| 23 | VCC | power_in | Power supply pin; connect to the system power supply. |
| 24 | VSS | power_in | Ground pin; connect to the system ground (0 V). |
| 25 | P44 | bidirectional | Port P44 with AN004 A/D input and CMPC12 comparator input; I/O buffer powered by AVCC0. |
| 26 | P43 | bidirectional | Port P43 with AN003 A/D input and CMPC02 comparator input; I/O buffer powered by AVCC0. |
| 27 | P42 | bidirectional | Port P42 with AN002 A/D input and CMPC20 comparator input; I/O buffer powered by AVCC0. |
| 28 | P41 | bidirectional | Port P41 with AN001 A/D input and CMPC10 comparator input; I/O buffer powered by AVCC0. |
| 29 | P40 | bidirectional | Port P40 with AN000 A/D input and CMPC00 comparator input; I/O buffer powered by AVCC0. |
| 30 | AVCC0 | power_in | Analog supply for the 12-bit A/D converter, comparator C and 8-bit D/A converter; connect to VCC when these modules are not used. |
| 31 | AVSS0 | power_in | Analog ground for the 12-bit A/D converter, comparator C and 8-bit D/A converter; connect to VSS when these modules are not used. |
| 32 | P11 | bidirectional | Port P11 with MTIOC3A, MTCLKA, POE8#, IRQ1 and CVREFC0 (comparator C reference voltage input) functions. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-32(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 32 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC | 2.7 | | 5.5 | V | Single supply, operation at up to 32 MHz | 35 |
| Operating temperature range (G version) | | -40 | | 105 | °C | G version | 35 |
| Maximum operating frequency | | | | 32 | MHz | VCC = 2.7 to 5.5V | 35 |
| High-speed on-chip oscillator accuracy | | -1 | | 1 | % | High-speed on-chip oscillator 32 MHz ±1% | 32 |
| Supply current | | | 11 | | mA | at 32 MHz (typ.) | 35 |
| E2 DataFlash erase/write cycles | | | 1e+06 | | cycles | typ. | 33 |
## CAD (KiCad official)
- Symbol: `R5F513T5AGFJ#10`
- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`
- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files: `r5f513t5agfj-10-etched.step` / `r5f513t5agfj-10-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `r5f513t5agfj-10.step` / `r5f513t5agfj-10.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](https://www.renesas.com/us/en/document/mah/rx13t-group-users-manual-hardware-rev110?r=1170191) (1055 pp, sha256 `b57248feedc44923`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/r5f513t5agfj-10-datasheet.pdf)