main
Ray
Publish 0.1.0
86035c3
R5F513T5ADFL#30
RENESAS · Pre-ordered MCUs · LQFP-48(7x7)
R5F513T5ADFL#30 from RENESAS, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCL | passive | Connect this pin to the VSS pin via the 4.7 μF smoothing capacitor used to stabilize the internal power supply, placed close to the pin. |
| 2 | MD | input | Operating mode setting pin; the signal level on this pin must not be changed during operation. |
| 3 | RES# | input | Reset pin; the MCU enters the reset state when this signal goes low. |
| 4 | P37/XTAL | bidirectional | Multi-function pin: XTAL crystal connection output of the main clock oscillator, or general-purpose I/O port P37 when the main clock is not used (MOSCCR.MOSTP set to 1). |
| 5 | VSS | power_in | Ground pin; connect it to the system power supply (0 V). |
| 6 | P36/EXTAL | bidirectional | Multi-function pin: external clock input (EXTAL) for the main clock oscillator, or general-purpose I/O port P36 when the main clock is not used (MOSCCR.MOSTP set to 1). |
| 7 | VCC | power_in | Power supply pin; connect it to the system power supply. |
| 8 | PE2 | input | 1-bit input port PE2 that also serves as the NMI non-maskable interrupt request pin, IRQ0 and POE10#. |
| 9 | PD6 | bidirectional | I/O port PD6 with alternate functions MTIOC0D, CTS1#/RTS1#/SS1#, IRQ5 and ADST0. |
| 10 | PD5 | bidirectional | I/O port PD5 with alternate functions MTIOC0C, RXD1/SMISO1/SSCL1 and IRQ3. |
| 11 | PD4 | bidirectional | I/O port PD4 with alternate functions MTIOC0B, SCK1 and IRQ2. |
| 12 | PD3 | bidirectional | I/O port PD3 with alternate functions MTIOC0A and TXD1/SMOSI1/SSDA1. |
| 13 | PB7 | bidirectional | I/O port PB7 with alternate functions MTIOC3C/MTCLKD, RXD1/SMISO1/SSCL1/RXD5/SMISO5/SSCL5 and IRQ5. |
| 14 | PB6 | bidirectional | I/O port PB6 with alternate functions MTIOC1B/MTIOC3A and TXD1/SMOSI1/SSDA1/TXD5/SMOSI5/SSDA5. |
| 15 | PB5 | bidirectional | I/O port PB5 with alternate function ADTRG0# (A/D external trigger input). |
| 16 | PB4 | bidirectional | I/O port PB4 with alternate functions POE8# and IRQ3. |
| 17 | PB3 | bidirectional | I/O port PB3 with alternate functions MTIOC0A/CACREF and SCK5/SCK12. |
| 18 | PB2 | bidirectional | I/O port PB2 with alternate functions MTIOC0B/MTCLKC/ADSM0 and TXD5/SMOSI5/SSDA5/SDA0. |
| 19 | PB1 | bidirectional | I/O port PB1 with alternate functions MTIOC0C/MTIC5W/MTCLKA, RXD5/SMISO5/SSCL5/SCL0 and IRQ2. |
| 20 | PB0 | bidirectional | I/O port PB0 with alternate functions MTIOC0D/MTIOC2A/MTCLKB and TXD12/TXDX12/SIOX12/SMOSI12/SSDA12. |
| 21 | PA3 | bidirectional | I/O port PA3 with alternate functions MTIOC1B/MTIOC2A and CTS12#/RTS12#/SS12#. |
| 22 | PA2 | bidirectional | I/O port PA2 with alternate functions MTIOC1A/MTIOC2B, CTS5#/RTS5#/SS5# and IRQ4. |
| 23 | P94 | bidirectional | I/O port P94 with alternate functions MTIOC2B/MTIC5U/MTCLKA, RXD12/RXDX12/SMISO12/SSCL12 and IRQ1. |
| 24 | P93 | bidirectional | I/O port P93 with alternate functions MTIOC1A/MTIC5V, SCK5/SCK12, IRQ0 and ADTRG0#. |
| 25 | P76 | bidirectional | I/O port P76 with alternate function MTIOC4D; fixed to high drive output in the port function table. |
| 26 | P75 | bidirectional | I/O port P75 with alternate function MTIOC4C; fixed to high drive output in the port function table. |
| 27 | P74 | bidirectional | I/O port P74 with alternate function MTIOC3D. |
| 28 | P73 | bidirectional | I/O port P73 with alternate function MTIOC4B. |
| 29 | P72 | bidirectional | I/O port P72 with alternate function MTIOC4A. |
| 30 | P71 | bidirectional | I/O port P71 with alternate function MTIOC3B. |
| 31 | P70 | bidirectional | I/O port P70 with alternate functions POE0# and IRQ5. |
| 32 | VCC | power_in | Power supply pin; connect it to the system power supply. |
| 33 | VSS | power_in | Ground pin; connect it to the system power supply (0 V). |
| 34 | P24 | bidirectional | I/O port P24 with alternate functions MTIC5U, RXD5/SMISO5/SSCL5, IRQ3 and COMP0. |
| 35 | P23 | bidirectional | I/O port P23 with alternate functions MTIC5V/CACREF, TXD5/SMOSI5/SSDA5, IRQ4 and COMP1. |
| 36 | P22 | bidirectional | I/O port P22 with alternate functions MTIC5W, IRQ2 and COMP2. |
| 37 | P47 | bidirectional | I/O port P47 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN007 and comparator input CMPC13. |
| 38 | P46 | bidirectional | I/O port P46 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN006 and comparator input CMPC03. |
| 39 | P45 | bidirectional | I/O port P45 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN005 and comparator input CMPC22. |
| 40 | P44 | bidirectional | I/O port P44 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN004 and comparator input CMPC12. |
| 41 | P43 | bidirectional | I/O port P43 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN003 and comparator input CMPC02. |
| 42 | P42 | bidirectional | I/O port P42 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN002 and comparator input CMPC20. |
| 43 | P41 | bidirectional | I/O port P41 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN001 and comparator input CMPC10. |
| 44 | P40 | bidirectional | I/O port P40 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN000 and comparator input CMPC00. |
| 45 | AVCC0 | power_in | Analog voltage supply pin for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VCC when these modules are not used. |
| 46 | AVSS0 | power_in | Analog ground pin for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VSS when these modules are not used. |
| 47 | P11 | bidirectional | I/O port P11 with alternate functions MTIOC3A/MTCLKA/POE8#, IRQ1 and CVREFC0 (comparator C reference voltage input). |
| 48 | P10 | bidirectional | I/O port P10 with alternate functions MTCLKB and IRQ0. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
CAD (KiCad official)
- Symbol:
R5F513T5ADFL#30 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
r5f513t5adfl-30-etched.step/r5f513t5adfl-30-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f513t5adfl-30.step/r5f513t5adfl-30.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (1055 pp, sha256
b57248feedc44923, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# R5F513T5ADFL#30
**RENESAS** · Pre-ordered MCUs · LQFP-48(7x7)
R5F513T5ADFL#30 from RENESAS, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCL | passive | Connect this pin to the VSS pin via the 4.7 μF smoothing capacitor used to stabilize the internal power supply, placed close to the pin. |
| 2 | MD | input | Operating mode setting pin; the signal level on this pin must not be changed during operation. |
| 3 | RES# | input | Reset pin; the MCU enters the reset state when this signal goes low. |
| 4 | P37/XTAL | bidirectional | Multi-function pin: XTAL crystal connection output of the main clock oscillator, or general-purpose I/O port P37 when the main clock is not used (MOSCCR.MOSTP set to 1). |
| 5 | VSS | power_in | Ground pin; connect it to the system power supply (0 V). |
| 6 | P36/EXTAL | bidirectional | Multi-function pin: external clock input (EXTAL) for the main clock oscillator, or general-purpose I/O port P36 when the main clock is not used (MOSCCR.MOSTP set to 1). |
| 7 | VCC | power_in | Power supply pin; connect it to the system power supply. |
| 8 | PE2 | input | 1-bit input port PE2 that also serves as the NMI non-maskable interrupt request pin, IRQ0 and POE10#. |
| 9 | PD6 | bidirectional | I/O port PD6 with alternate functions MTIOC0D, CTS1#/RTS1#/SS1#, IRQ5 and ADST0. |
| 10 | PD5 | bidirectional | I/O port PD5 with alternate functions MTIOC0C, RXD1/SMISO1/SSCL1 and IRQ3. |
| 11 | PD4 | bidirectional | I/O port PD4 with alternate functions MTIOC0B, SCK1 and IRQ2. |
| 12 | PD3 | bidirectional | I/O port PD3 with alternate functions MTIOC0A and TXD1/SMOSI1/SSDA1. |
| 13 | PB7 | bidirectional | I/O port PB7 with alternate functions MTIOC3C/MTCLKD, RXD1/SMISO1/SSCL1/RXD5/SMISO5/SSCL5 and IRQ5. |
| 14 | PB6 | bidirectional | I/O port PB6 with alternate functions MTIOC1B/MTIOC3A and TXD1/SMOSI1/SSDA1/TXD5/SMOSI5/SSDA5. |
| 15 | PB5 | bidirectional | I/O port PB5 with alternate function ADTRG0# (A/D external trigger input). |
| 16 | PB4 | bidirectional | I/O port PB4 with alternate functions POE8# and IRQ3. |
| 17 | PB3 | bidirectional | I/O port PB3 with alternate functions MTIOC0A/CACREF and SCK5/SCK12. |
| 18 | PB2 | bidirectional | I/O port PB2 with alternate functions MTIOC0B/MTCLKC/ADSM0 and TXD5/SMOSI5/SSDA5/SDA0. |
| 19 | PB1 | bidirectional | I/O port PB1 with alternate functions MTIOC0C/MTIC5W/MTCLKA, RXD5/SMISO5/SSCL5/SCL0 and IRQ2. |
| 20 | PB0 | bidirectional | I/O port PB0 with alternate functions MTIOC0D/MTIOC2A/MTCLKB and TXD12/TXDX12/SIOX12/SMOSI12/SSDA12. |
| 21 | PA3 | bidirectional | I/O port PA3 with alternate functions MTIOC1B/MTIOC2A and CTS12#/RTS12#/SS12#. |
| 22 | PA2 | bidirectional | I/O port PA2 with alternate functions MTIOC1A/MTIOC2B, CTS5#/RTS5#/SS5# and IRQ4. |
| 23 | P94 | bidirectional | I/O port P94 with alternate functions MTIOC2B/MTIC5U/MTCLKA, RXD12/RXDX12/SMISO12/SSCL12 and IRQ1. |
| 24 | P93 | bidirectional | I/O port P93 with alternate functions MTIOC1A/MTIC5V, SCK5/SCK12, IRQ0 and ADTRG0#. |
| 25 | P76 | bidirectional | I/O port P76 with alternate function MTIOC4D; fixed to high drive output in the port function table. |
| 26 | P75 | bidirectional | I/O port P75 with alternate function MTIOC4C; fixed to high drive output in the port function table. |
| 27 | P74 | bidirectional | I/O port P74 with alternate function MTIOC3D. |
| 28 | P73 | bidirectional | I/O port P73 with alternate function MTIOC4B. |
| 29 | P72 | bidirectional | I/O port P72 with alternate function MTIOC4A. |
| 30 | P71 | bidirectional | I/O port P71 with alternate function MTIOC3B. |
| 31 | P70 | bidirectional | I/O port P70 with alternate functions POE0# and IRQ5. |
| 32 | VCC | power_in | Power supply pin; connect it to the system power supply. |
| 33 | VSS | power_in | Ground pin; connect it to the system power supply (0 V). |
| 34 | P24 | bidirectional | I/O port P24 with alternate functions MTIC5U, RXD5/SMISO5/SSCL5, IRQ3 and COMP0. |
| 35 | P23 | bidirectional | I/O port P23 with alternate functions MTIC5V/CACREF, TXD5/SMOSI5/SSDA5, IRQ4 and COMP1. |
| 36 | P22 | bidirectional | I/O port P22 with alternate functions MTIC5W, IRQ2 and COMP2. |
| 37 | P47 | bidirectional | I/O port P47 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN007 and comparator input CMPC13. |
| 38 | P46 | bidirectional | I/O port P46 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN006 and comparator input CMPC03. |
| 39 | P45 | bidirectional | I/O port P45 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN005 and comparator input CMPC22. |
| 40 | P44 | bidirectional | I/O port P44 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN004 and comparator input CMPC12. |
| 41 | P43 | bidirectional | I/O port P43 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN003 and comparator input CMPC02. |
| 42 | P42 | bidirectional | I/O port P42 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN002 and comparator input CMPC20. |
| 43 | P41 | bidirectional | I/O port P41 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN001 and comparator input CMPC10. |
| 44 | P40 | bidirectional | I/O port P40 whose I/O buffer is powered from AVCC0, multiplexed with analog input AN000 and comparator input CMPC00. |
| 45 | AVCC0 | power_in | Analog voltage supply pin for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VCC when these modules are not used. |
| 46 | AVSS0 | power_in | Analog ground pin for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VSS when these modules are not used. |
| 47 | P11 | bidirectional | I/O port P11 with alternate functions MTIOC3A/MTCLKA/POE8#, IRQ1 and CVREFC0 (comparator C reference voltage input). |
| 48 | P10 | bidirectional | I/O port P10 with alternate functions MTCLKB and IRQ0. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
## CAD (KiCad official)
- Symbol: `R5F513T5ADFL#30`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `r5f513t5adfl-30-etched.step` / `r5f513t5adfl-30-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `r5f513t5adfl-30.step` / `r5f513t5adfl-30.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](https://www.renesas.com/us/en/document/mah/rx13t-group-users-manual-hardware-rev110) (1055 pp, sha256 `b57248feedc44923`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/r5f513t5adfl-30-datasheet.pdf)