component
R5F513T5ADFL#10
Public Made by Adomby adom
RENESAS Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownR5F513T5ADFL#10
RENESAS · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)
R5F513T5ADFL#10 from RENESAS, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCL | passive | Connect this pin to VSS via the 4.7 μF smoothing capacitor used to stabilize the internal power supply, placed close to the pin. |
| 2 | MD | input | Mode-setting pin; the signal level on this pin must not be changed during operation. Alternate function FINED (FINE interface, I/O). |
| 3 | RES# | input | Reset pin; the MCU enters the reset state when this signal goes low. |
| 4 | P37/XTAL | output | XTAL is the output pin for connecting a crystal to the main clock oscillator; P37 is a general I/O port pin when the main clock is not used. |
| 5 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 6 | P36/EXTAL | input | EXTAL is the main clock input pin (crystal or external clock input, 20 MHz max for external clock); P36 is a general I/O port pin when the main clock is not used. |
| 7 | VCC | power_in | Power supply pin; connect to the system power supply. |
| 8 | PE2/NMI | input | Non-maskable interrupt request input (NMI), also usable as 1-bit input port PE2 and as POE10#/IRQ0; connect to VCC via a pull-up resistor when unused. |
| 9 | PD6 | bidirectional | General I/O port pin with selectable functions MTIOC0D, CTS1#/RTS1#/SS1#, ADST0 and IRQ5. |
| 10 | PD5 | bidirectional | General I/O port pin with selectable functions MTIOC0C, RXD1/SMISO1/SSCL1 and IRQ3. |
| 11 | PD4 | bidirectional | General I/O port pin with selectable functions MTIOC0B, SCK1 and IRQ2. |
| 12 | PD3 | bidirectional | General I/O port pin with selectable functions MTIOC0A and TXD1/SMOSI1/SSDA1. |
| 13 | PB7 | bidirectional | General I/O port pin with selectable functions MTIOC3C/MTCLKD, RXD1/SMISO1/SSCL1/RXD5/SMISO5/SSCL5 and IRQ5. |
| 14 | PB6 | bidirectional | General I/O port pin with selectable functions MTIOC1B/MTIOC3A and TXD1/SMOSI1/SSDA1/TXD5/SMOSI5/SSDA5; fixed to high drive output. |
| 15 | PB5 | bidirectional | General I/O port pin with selectable function ADTRG0# (A/D external trigger input). |
| 16 | PB4 | bidirectional | General I/O port pin with selectable functions POE8# and IRQ3. |
| 17 | PB3 | bidirectional | General I/O port pin with selectable functions MTIOC0A/CACREF and SCK5/SCK12. |
| 18 | PB2 | bidirectional | General I/O port pin with selectable functions MTIOC0B/MTCLKC/ADSM0, TXD5/SMOSI5/SSDA5 and SDA0; fixed to high drive output. |
| 19 | PB1 | bidirectional | General I/O port pin with selectable functions MTIOC0C/MTIC5W/MTCLKA, RXD5/SMISO5/SSCL5/SCL0 and IRQ2; fixed to high drive output. |
| 20 | PB0 | bidirectional | General I/O port pin with selectable functions MTIOC0D/MTIOC2A/MTCLKB and TXD12/TXDX12/SIOX12/SMOSI12/SSDA12. |
| 21 | PA3 | bidirectional | General I/O port pin with selectable functions MTIOC1B/MTIOC2A and CTS12#/RTS12#/SS12#. |
| 22 | PA2 | bidirectional | General I/O port pin with selectable functions MTIOC1A/MTIOC2B, CTS5#/RTS5#/SS5# and IRQ4. |
| 23 | P94 | bidirectional | General I/O port pin with selectable functions MTIOC2B/MTIC5U/MTCLKA, RXD12/RXDX12/SMISO12/SSCL12 and IRQ1. |
| 24 | P93 | bidirectional | General I/O port pin with selectable functions MTIOC1A/MTIC5V, SCK5/SCK12 and IRQ0/ADTRG0#. |
| 25 | P76 | bidirectional | General I/O port pin with selectable function MTIOC4D; fixed to high drive output. |
| 26 | P75 | bidirectional | General I/O port pin with selectable function MTIOC4C; fixed to high drive output. |
| 27 | P74 | bidirectional | General I/O port pin with selectable function MTIOC3D; fixed to high drive output. |
| 28 | P73 | bidirectional | General I/O port pin with selectable function MTIOC4B; fixed to high drive output. |
| 29 | P72 | bidirectional | General I/O port pin with selectable function MTIOC4A; fixed to high drive output. |
| 30 | P71 | bidirectional | General I/O port pin with selectable function MTIOC3B; fixed to high drive output. |
| 31 | P70 | bidirectional | General I/O port pin with selectable functions POE0# and IRQ5. |
| 32 | VCC | power_in | Power supply pin; connect to the system power supply. |
| 33 | VSS | power_in | Ground pin; connect to the system power supply (0 V). |
| 34 | P24 | bidirectional | General I/O port pin with selectable functions MTIC5U, RXD5/SMISO5/SSCL5, IRQ3 and COMP0. |
| 35 | P23 | bidirectional | General I/O port pin with selectable functions MTIC5V/CACREF, TXD5/SMOSI5/SSDA5, IRQ4 and COMP1. |
| 36 | P22 | bidirectional | General I/O port pin with selectable functions MTIC5W, IRQ2 and COMP2. |
| 37 | P47 | bidirectional | General I/O port pin, also AN007 analog input and CMPC13 comparator input; I/O buffer powered from AVCC0. |
| 38 | P46 | bidirectional | General I/O port pin, also AN006 analog input and CMPC03 comparator input; I/O buffer powered from AVCC0. |
| 39 | P45 | bidirectional | General I/O port pin, also AN005 analog input and CMPC22 comparator input; I/O buffer powered from AVCC0. |
| 40 | P44 | bidirectional | General I/O port pin, also AN004 analog input and CMPC12 comparator input; I/O buffer powered from AVCC0. |
| 41 | P43 | bidirectional | General I/O port pin, also AN003 analog input and CMPC02 comparator input; I/O buffer powered from AVCC0. |
| 42 | P42 | bidirectional | General I/O port pin, also AN002 analog input and CMPC20 comparator input; I/O buffer powered from AVCC0. |
| 43 | P41 | bidirectional | General I/O port pin, also AN001 analog input and CMPC10 comparator input; I/O buffer powered from AVCC0. |
| 44 | P40 | bidirectional | General I/O port pin, also AN000 analog input and CMPC00 comparator input; I/O buffer powered from AVCC0. |
| 45 | AVCC0 | power_in | Analog voltage supply for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VCC when these modules are not used. |
| 46 | AVSS0 | power_in | Analog ground for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect to VSS when these modules are not used. |
| 47 | P11 | bidirectional | General I/O port pin with selectable functions MTIOC3A/MTCLKA/POE8#, IRQ1 and CVREFC0 analog reference input. |
| 48 | P10 | bidirectional | General I/O port pin with selectable functions MTCLKB and IRQ0. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
CAD (KiCad official)
- Symbol:
R5F513T5ADFL#10 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
r5f513t5adfl-10-etched.step/r5f513t5adfl-10-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f513t5adfl-10.step/r5f513t5adfl-10.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (1055 pp, sha256
0760744de0a92b5b, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).