main
Ray Set visibility: public add4c39
{
  "schema_version": 1,
  "type": "component",
  "slug": "r5f513t3agfj-30",
  "title": "R5F513T3AGFJ#30",
  "brief": "RENESAS Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "r5f513t3agfj#30",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "R5F513T3AGFJ#30",
    "manufacturer": "RENESAS",
    "package": "LQFP-32(7x7)",
    "pin_count": 32,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://www.renesas.com/us/en/document/mah/rx13t-group-users-manual-hardware-rev110",
    "parts": {
      "symbol": "r5f513t3agfj-30.kicad_sym",
      "footprint": "r5f513t3agfj-30.kicad_mod",
      "model_3d": "r5f513t3agfj-30-hero.glb",
      "model_3d_plain": "r5f513t3agfj-30.glb",
      "model_3d_step": "r5f513t3agfj-30-etched.step",
      "model_3d_step_plain": "r5f513t3agfj-30.step",
      "lbr": "r5f513t3agfj-30.lbr"
    },
    "distributor_links": {
      "lcsc": "C20351720",
      "digikey": "559-R5F513T3AGFJ#30-ND",
      "mouser": "968-R5F513T3AGFJ#30"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T13:19:19Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "559-R5F513T3AGFJ#30-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "968-R5F513T3AGFJ#30",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCL",
        "type": "passive",
        "description": "Connect this pin to the VSS pin via the 4.7 μF smoothing capacitor used to stabilize the internal power supply, placed close to the pin."
      },
      {
        "number": "2",
        "name": "MD",
        "type": "input",
        "description": "Operating mode setting pin; the signal level on this pin must not be changed during operation (multiplexed with FINED, the FINE on-chip emulator interface I/O)."
      },
      {
        "number": "3",
        "name": "RES#",
        "type": "input",
        "description": "Reset pin; the MCU enters the reset state when this signal goes low, and it should be connected to VCC via a pull-up resistor when unused."
      },
      {
        "number": "4",
        "name": "P37/XTAL",
        "type": "output",
        "description": "XTAL output pin for connecting a crystal to the main clock oscillator; the pin can alternatively be used as general I/O port P37 when the main clock is not used."
      },
      {
        "number": "5",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground pin; connect it to the system power supply (0 V)."
      },
      {
        "number": "6",
        "name": "P36/EXTAL",
        "type": "input",
        "description": "EXTAL input pin for the main clock oscillator, through which an external clock can be input; the pin can alternatively be used as general I/O port P36 when the main clock is not used."
      },
      {
        "number": "7",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply pin; connect it to the system power supply."
      },
      {
        "number": "8",
        "name": "PE2",
        "type": "input",
        "description": "1-bit input-only port pin that also serves as the NMI non-maskable interrupt request input and POE10# request input; connect it to VCC via a pull-up resistor when unused."
      },
      {
        "number": "9",
        "name": "PB7",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC3C/MTCLKD, SCI1/SCI5 serial signals and IRQ5; input pull-up, open-drain output and drive capacity switching are available."
      },
      {
        "number": "10",
        "name": "PB6",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC1B/MTIOC3A and SCI1/SCI5 transmit signals; fixed to high drive output and 5-V tolerant with input pull-up and open-drain output available."
      },
      {
        "number": "11",
        "name": "PB3",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC0A/CACREF and SCI5/SCI12 clock SCK5/SCK12; input pull-up, open-drain output and drive capacity switching are available."
      },
      {
        "number": "12",
        "name": "PB2",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC0B/MTCLKC/ADSM0, SCI5 transmit signals and SDA0; fixed to high drive output and 5-V tolerant."
      },
      {
        "number": "13",
        "name": "PB1",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC0C/MTIC5W/MTCLKA, SCI5 receive signals, SCL0 and IRQ2; fixed to high drive output and 5-V tolerant, with TTL input level when SCL is selected with SMBus in RIIC."
      },
      {
        "number": "14",
        "name": "PB0",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC0D/MTIOC2A/MTCLKB and SCI12 transmit signals; input pull-up, open-drain output and drive capacity switching are available."
      },
      {
        "number": "15",
        "name": "P94",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC2B/MTIC5U/MTCLKA, SCI12 receive signals and IRQ1; input pull-up, open-drain output and drive capacity switching are available."
      },
      {
        "number": "16",
        "name": "P93",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC1A/MTIC5V, SCI5/SCI12 clock SCK5/SCK12, IRQ0 and ADTRG0# A/D trigger input; input pull-up, open-drain output and drive capacity switching are available."
      },
      {
        "number": "17",
        "name": "P76",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC4D; fixed to high drive output and 5-V tolerant with input pull-up available."
      },
      {
        "number": "18",
        "name": "P75",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC4C; fixed to high drive output and 5-V tolerant with input pull-up available."
      },
      {
        "number": "19",
        "name": "P74",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC3D; fixed to high drive output and 5-V tolerant with input pull-up available."
      },
      {
        "number": "20",
        "name": "P73",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC4B; fixed to high drive output and 5-V tolerant with input pull-up available."
      },
      {
        "number": "21",
        "name": "P72",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC4A; fixed to high drive output and 5-V tolerant with input pull-up available."
      },
      {
        "number": "22",
        "name": "P71",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC3B; fixed to high drive output and 5-V tolerant with input pull-up available."
      },
      {
        "number": "23",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply pin; connect it to the system power supply."
      },
      {
        "number": "24",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground pin; connect it to the system power supply (0 V)."
      },
      {
        "number": "25",
        "name": "P44",
        "type": "bidirectional",
        "description": "General I/O port pin shared with analog input AN004 and comparator input CMPC12; its I/O buffer power source is AVCC0, and it must be set as a general input when used as an analog input."
      },
      {
        "number": "26",
        "name": "P43",
        "type": "bidirectional",
        "description": "General I/O port pin shared with analog input AN003 and comparator input CMPC02; its I/O buffer power source is AVCC0, and it must be set as a general input when used as an analog input."
      },
      {
        "number": "27",
        "name": "P42",
        "type": "bidirectional",
        "description": "General I/O port pin shared with analog input AN002 and comparator input CMPC20; its I/O buffer power source is AVCC0, and it must be set as a general input when used as an analog input."
      },
      {
        "number": "28",
        "name": "P41",
        "type": "bidirectional",
        "description": "General I/O port pin shared with analog input AN001 and comparator input CMPC10; its I/O buffer power source is AVCC0, and it must be set as a general input when used as an analog input."
      },
      {
        "number": "29",
        "name": "P40",
        "type": "bidirectional",
        "description": "General I/O port pin shared with analog input AN000 and comparator input CMPC00; its I/O buffer power source is AVCC0, and it must be set as a general input when used as an analog input."
      },
      {
        "number": "30",
        "name": "AVCC0",
        "type": "power_in",
        "description": "Analog voltage supply pin for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect it to VCC when these modules are not used."
      },
      {
        "number": "31",
        "name": "AVSS0",
        "type": "power_in",
        "description": "Analog ground pin for the 12-bit A/D converter, comparator C and the 8-bit D/A converter; connect it to VSS when these modules are not used."
      },
      {
        "number": "32",
        "name": "P11",
        "type": "bidirectional",
        "description": "General I/O port pin multiplexed with MTIOC3A/MTCLKA/POE8#, IRQ1 and CVREFC0 comparator reference voltage input; input pull-up, open-drain output and drive capacity switching are available."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package/MPN mapping not verifiable from the supplied pages. The product list (Section 1.2, List of P; Multiplexed pins whose primary function was assigned by the datasheet's pin-function table rather th; Pin type for port pins was set to bidirectional from the I/O designation in Table 1.4 and Table 1.6;",
          "2/32 pins cited to the wrong page (name found elsewhere): ['30:AVCC0@p40', '31:AVSS0@p40']"
        ],
        "pages_sent": 111,
        "cost_usd": 0.5533,
        "at": "2026-11-13T13:19:09"
      },
      "datasheet": {
        "url": "https://www.renesas.com/us/en/document/mah/rx13t-group-users-manual-hardware-rev110",
        "pages": 1055,
        "sha256": "b57248feedc44923",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 32,
        "described": 32,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "r5f513t3agfj-30.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9,
          9,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "be0e412f1c66fee70039b0e109e0cc7c823161dda97593718afa97569bc61ce3",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "r5f513t3agfj-30-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9,
          9,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "0eb02370a66cb3663e5077cb12e9157d32d1c17b75e75bccf364e56dd0586dd1",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "PLQP0032GB-A",
      "source_page": 1050,
      "D": {
        "nom_mm": 7,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 7,
        "range_mm": [
          null,
          null
        ]
      },
      "E": {
        "nom_mm": 9,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.8,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.7,
        "range_mm": [
          null,
          1.7
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "r5f513t3agfj-30.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "RENESAS",
      "Package": "LQFP-32(7x7)",
      "Category": "Embedded Processors & Controllers",
      "Pins": "32"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "r5f513t3agfj#30"
  ],
  "discovery_pitch": "R5F513T3AGFJ#30 (RENESAS) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "r5f513t3agfj-30.kicad_sym",
    "r5f513t3agfj-30.kicad_mod",
    "r5f513t3agfj-30.glb",
    "r5f513t3agfj-30.step",
    "r5f513t3agfj-30.lbr",
    "docs/hero.png",
    "docs/r5f513t3agfj-30-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "r5f513t3agfj-30-hero.glb",
    "r5f513t3agfj-30-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}