3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownR5F3650MDFB#30
RENESAS · Pre-ordered MCUs · LQFP-100(14x14)
R5F3650MDFB#30 from RENESAS, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P9_4/DA1/TB4IN/PWM1 | bidirectional | VCC1 I/O port P9_4 shared with D/A converter output DA1, timer input TB4IN and PWM output PWM1. |
| 2 | P9_3/DA0/TB3IN/PWM0 | bidirectional | VCC1 I/O port P9_3 shared with D/A converter output DA0, timer input TB3IN and PWM output PWM0. |
| 3 | P9_2/TB2IN/PMC0/SOUT3 | bidirectional | VCC1 I/O port P9_2 shared with TB2IN, remote control receiver input PMC0 and serial data output SOUT3. |
| 4 | P9_1/TB1IN/PMC1/SIN3 | bidirectional | VCC1 I/O port P9_1 shared with TB1IN, remote control receiver input PMC1 and serial data input SIN3. |
| 5 | P9_0/TB0IN/CLK3 | bidirectional | VCC1 I/O port P9_0 shared with TB0IN and SI/O3 transmit/receive clock CLK3. |
| 6 | BYTE | input | External data bus width select input (VCC1): 16 bits when low, 8 bits when high, must be fixed high or low and connected to VSS in single-chip mode. |
| 7 | CNVSS | input | Processor mode switch input (VCC1): connect to VSS via a resistor for single-chip mode after reset, or to VCC1 for microprocessor mode. |
| 8 | P8_7/XCIN | bidirectional | VCC1 port P8_7 shared with sub clock oscillator input XCIN, where a crystal is connected between XCIN and XCOUT or an external clock is input. |
| 9 | P8_6/XCOUT | bidirectional | VCC1 port P8_6 shared with sub clock oscillator output XCOUT, left open when an external clock is input to XCIN. |
| 10 | RESET | input | Reset input (VCC1); driving this pin low resets the MCU. |
| 11 | XOUT | output | Main clock oscillator output (VCC1), left open when an external clock is input to XIN. |
| 12 | VSS | power_in | Ground, 0 V. |
| 13 | XIN | input | Main clock oscillator input (VCC1) for a ceramic resonator or crystal between XIN and XOUT, or an external clock. |
| 14 | VCC1 | power_in | Power supply input, apply 2.7 to 5.5 V (VCC1 >= VCC2). |
| 15 | P8_5/NMI/SD/CEC | bidirectional | VCC1 N-channel open drain port P8_5 (input only for NMI level) shared with NMI interrupt input, forced cutoff input SD and CEC I/O. |
| 16 | P8_4/INT2/ZP | bidirectional | VCC1 I/O port P8_4 shared with INT2 interrupt input and Z-phase input ZP. |
| 17 | P8_3/INT1 | bidirectional | VCC1 I/O port P8_3 shared with INT1 interrupt input. |
| 18 | P8_2/INT0 | bidirectional | VCC1 I/O port P8_2 shared with INT0 interrupt input. |
| 19 | P8_1/TA4IN/U/CTS5/RTS5 | bidirectional | VCC1 I/O port P8_1 shared with TA4IN, three-phase motor control output U (inverted) and UART5 CTS5/RTS5. |
| 20 | P8_0/TA4OUT/U/RXD5/SCL5 | bidirectional | VCC1 I/O port P8_0 shared with TA4OUT, three-phase motor control output U, and UART5 RXD5/SCL5. |
| 21 | P7_7/TA3IN/CLK5 | bidirectional | VCC1 I/O port P7_7 shared with TA3IN and UART5 clock CLK5. |
| 22 | P7_6/TA3OUT/TXD5/SDA5 | bidirectional | VCC1 I/O port P7_6 shared with TA3OUT and UART5 TXD5/SDA5. |
| 23 | P7_5/TA2IN/W | bidirectional | VCC1 I/O port P7_5 shared with TA2IN and three-phase motor control output W (inverted). |
| 24 | P7_4/TA2OUT/W | bidirectional | VCC1 I/O port P7_4 shared with TA2OUT and three-phase motor control output W. |
| 25 | P7_3/TA1IN/V/CTS2/RTS2 | bidirectional | VCC1 I/O port P7_3 shared with TA1IN, three-phase motor control output V (inverted) and UART2 CTS2/RTS2. |
| 26 | P7_2/TA1OUT/V/CLK2 | bidirectional | VCC1 I/O port P7_2 shared with TA1OUT, three-phase motor control output V and UART2 clock CLK2. |
| 27 | P7_1/TA0IN/TB5IN/RXD2/SCL2/SCLMM | bidirectional | VCC1 N-channel open drain port P7_1 shared with TA0IN, TB5IN, UART2 RXD2/SCL2 and multi-master I2C clock SCLMM. |
| 28 | P7_0/TA0OUT/TXD2/SDA2/SDAMM | bidirectional | VCC1 N-channel open drain port P7_0 shared with TA0OUT, UART2 TXD2/SDA2 and multi-master I2C data SDAMM. |
| 29 | P6_7/TXD1/SDA1 | bidirectional | VCC1 I/O port P6_7 shared with UART1 TXD1/SDA1. |
| 30 | P6_6/RXD1/SCL1 | bidirectional | VCC1 I/O port P6_6 shared with UART1 RXD1/SCL1. |
| 31 | P6_5/CLK1 | bidirectional | VCC1 I/O port P6_5 shared with UART1 clock CLK1. |
| 32 | P6_4/CTS1/RTS1/CTS0/CLKS1 | bidirectional | VCC1 I/O port P6_4 shared with CTS1/RTS1, CTS0 and clock multiple-pin output CLKS1. |
| 33 | P6_3/TXD0/SDA0 | bidirectional | VCC1 I/O port P6_3 shared with UART0 TXD0/SDA0. |
| 34 | P6_2/RXD0/SCL0 | bidirectional | VCC1 I/O port P6_2 shared with UART0 RXD0/SCL0. |
| 35 | P6_1/CLK0 | bidirectional | VCC1 I/O port P6_1 shared with UART0 clock CLK0. |
| 36 | P6_0/RTCOUT/CTS0/RTS0 | bidirectional | VCC1 I/O port P6_0 shared with real-time clock output RTCOUT and UART0 CTS0/RTS0. |
| 37 | P5_7/RDY/CLKOUT | bidirectional | VCC2 I/O port P5_7 shared with bus wait input RDY (wait state while low) and clock output CLKOUT. |
| 38 | P5_6/ALE | bidirectional | VCC2 I/O port P5_6 shared with address latch signal output ALE. |
| 39 | P5_5/HOLD | bidirectional | VCC2 I/O port P5_5 shared with HOLD input, which is unavailable and must be pulled up to VCC2 via a resistor when used as HOLD. |
| 40 | P5_4/HLDA | bidirectional | VCC2 I/O port P5_4 shared with HLDA output, which is low in a hold state. |
| 41 | P5_3/BCLK | bidirectional | VCC2 I/O port P5_3 shared with BCLK output. |
| 42 | P5_2/RD | bidirectional | VCC2 I/O port P5_2 shared with read strobe output RD. |
| 43 | P5_1/WRH/BHE | bidirectional | VCC2 I/O port P5_1 shared with write high WRH or byte high enable BHE output. |
| 44 | P5_0/WRL/WR | bidirectional | VCC2 I/O port P5_0 shared with write low WRL or write WR output. |
| 45 | P4_7/PWM1/TXD7/SDA7/CS3 | bidirectional | VCC2 I/O port P4_7 shared with PWM1, UART7 TXD7/SDA7 and chip select CS3. |
| 46 | P4_6/PWM0/RXD7/SCL7/CS2 | bidirectional | VCC2 I/O port P4_6 shared with PWM0, UART7 RXD7/SCL7 and chip select CS2. |
| 47 | P4_5/CLK7/CS1 | bidirectional | VCC2 I/O port P4_5 shared with UART7 clock CLK7 and chip select CS1. |
| 48 | P4_4/CTS7/RTS7/CS0 | bidirectional | VCC2 I/O port P4_4 shared with UART7 CTS7/RTS7 and chip select CS0. |
| 49 | P4_3/A19 | bidirectional | VCC2 I/O port P4_3 shared with address output A19. |
| 50 | P4_2/A18 | bidirectional | VCC2 I/O port P4_2 shared with address output A18. |
| 51 | P4_1/A17 | bidirectional | VCC2 I/O port P4_1 shared with address output A17. |
| 52 | P4_0/A16 | bidirectional | VCC2 I/O port P4_0 shared with address output A16. |
| 53 | P3_7/A15 | bidirectional | VCC2 I/O port P3_7 shared with address output A15. |
| 54 | P3_6/A14 | bidirectional | VCC2 I/O port P3_6 shared with address output A14. |
| 55 | P3_5/A13 | bidirectional | VCC2 I/O port P3_5 shared with address output A13. |
| 56 | P3_4/A12 | bidirectional | VCC2 I/O port P3_4 shared with address output A12. |
| 57 | P3_3/A11 | bidirectional | VCC2 I/O port P3_3 shared with address output A11. |
| 58 | P3_2/A10 | bidirectional | VCC2 I/O port P3_2 shared with address output A10. |
| 59 | P3_1/A9 | bidirectional | VCC2 I/O port P3_1 shared with address output A9. |
| 60 | VCC2 | power_in | Power supply input for the external bus pins, apply 2.7 to 5.5 V (VCC1 >= VCC2). |
| 61 | P3_0/A8 | bidirectional | VCC2 I/O port P3_0 shared with address output A8 or multiplexed A8/D7. |
| 62 | VSS | power_in | Ground, 0 V. |
| 63 | P2_7/AN2_7/A7 | bidirectional | VCC2 I/O port P2_7 shared with analog input AN2_7 and address A7 or multiplexed A7/D7, A7/D6. |
| 64 | P2_6/AN2_6/A6 | bidirectional | VCC2 I/O port P2_6 shared with analog input AN2_6 and address A6 or multiplexed A6/D6, A6/D5. |
| 65 | P2_5/INT7/AN2_5/A5 | bidirectional | VCC2 I/O port P2_5 shared with INT7 interrupt input, analog input AN2_5 and address A5 or multiplexed A5/D5, A5/D4. |
| 66 | P2_4/INT6/AN2_4/A4 | bidirectional | VCC2 I/O port P2_4 shared with INT6 interrupt input, analog input AN2_4 and address A4 or multiplexed A4/D4, A4/D3. |
| 67 | P2_3/AN2_3/A3 | bidirectional | VCC2 I/O port P2_3 shared with analog input AN2_3 and address A3 or multiplexed A3/D3, A3/D2. |
| 68 | P2_2/AN2_2/A2 | bidirectional | VCC2 I/O port P2_2 shared with analog input AN2_2 and address A2 or multiplexed A2/D2, A2/D1. |
| 69 | P2_1/AN2_1/A1 | bidirectional | VCC2 I/O port P2_1 shared with analog input AN2_1 and address A1 or multiplexed A1/D1, A1/D0. |
| 70 | P2_0/AN2_0/A0 | bidirectional | VCC2 I/O port P2_0 shared with analog input AN2_0 and address A0 or multiplexed A0/D0. |
| 71 | P1_7/INT5/IDU/D15 | bidirectional | VCC2 I/O port P1_7 shared with INT5 interrupt input, position data input IDU and data bus D15. |
| 72 | P1_6/INT4/IDW/D14 | bidirectional | VCC2 I/O port P1_6 shared with INT4 interrupt input, position data input IDW and data bus D14. |
| 73 | P1_5/INT3/IDV/D13 | bidirectional | VCC2 I/O port P1_5 shared with INT3 interrupt input, position data input IDV and data bus D13. |
| 74 | P1_4/D12 | bidirectional | VCC2 I/O port P1_4 shared with data bus D12. |
| 75 | P1_3/TXD6/SDA6/D11 | bidirectional | VCC2 I/O port P1_3 shared with UART6 TXD6/SDA6 and data bus D11. |
| 76 | P1_2/RXD6/SCL6/D10 | bidirectional | VCC2 I/O port P1_2 shared with UART6 RXD6/SCL6 and data bus D10. |
| 77 | P1_1/CLK6/D9 | bidirectional | VCC2 I/O port P1_1 shared with UART6 clock CLK6 and data bus D9. |
| 78 | P1_0/CTS6/RTS6/D8 | bidirectional | VCC2 I/O port P1_0 shared with UART6 CTS6/RTS6 and data bus D8. |
| 79 | P0_7/AN0_7/D7 | bidirectional | VCC2 I/O port P0_7 shared with analog input AN0_7 and data bus D7. |
| 80 | P0_6/AN0_6/D6 | bidirectional | VCC2 I/O port P0_6 shared with analog input AN0_6 and data bus D6. |
| 81 | P0_5/AN0_5/D5 | bidirectional | VCC2 I/O port P0_5 shared with analog input AN0_5 and data bus D5. |
| 82 | P0_4/AN0_4/D4 | bidirectional | VCC2 I/O port P0_4 shared with analog input AN0_4 and data bus D4. |
| 83 | P0_3/AN0_3/D3 | bidirectional | VCC2 I/O port P0_3 shared with analog input AN0_3 and data bus D3. |
| 84 | P0_2/AN0_2/D2 | bidirectional | VCC2 I/O port P0_2 shared with analog input AN0_2 and data bus D2. |
| 85 | P0_1/AN0_1/D1 | bidirectional | VCC2 I/O port P0_1 shared with analog input AN0_1 and data bus D1. |
| 86 | P0_0/AN0_0/D0 | bidirectional | VCC2 I/O port P0_0 shared with analog input AN0_0 and data bus D0. |
| 87 | P10_7/AN7/KI3 | bidirectional | VCC1 I/O port P10_7 shared with analog input AN7 and key input interrupt KI3. |
| 88 | P10_6/AN6/KI2 | bidirectional | VCC1 I/O port P10_6 shared with analog input AN6 and key input interrupt KI2. |
| 89 | P10_5/AN5/KI1 | bidirectional | VCC1 I/O port P10_5 shared with analog input AN5 and key input interrupt KI1. |
| 90 | P10_4/AN4/KI0 | bidirectional | VCC1 I/O port P10_4 shared with analog input AN4 and key input interrupt KI0. |
| 91 | P10_3/AN3 | bidirectional | VCC1 I/O port P10_3 shared with analog input AN3. |
| 92 | P10_2/AN2 | bidirectional | VCC1 I/O port P10_2 shared with analog input AN2. |
| 93 | P10_1/AN1 | bidirectional | VCC1 I/O port P10_1 shared with analog input AN1. |
| 94 | AVSS | power_in | Analog ground for the A/D and D/A converters, connect to VSS. |
| 95 | P10_0/AN0 | bidirectional | VCC1 I/O port P10_0 shared with analog input AN0. |
| 96 | VREF | power_in | Reference voltage input (VCC1) for the A/D and D/A converters. |
| 97 | AVCC | power_in | Analog power supply for the A/D and D/A converters, connect to VCC1. |
| 98 | P9_7/ADTRG/SIN4 | bidirectional | VCC1 I/O port P9_7 shared with A/D external trigger input ADTRG and serial data input SIN4. |
| 99 | P9_6/ANEX1/SOUT4 | bidirectional | VCC1 I/O port P9_6 shared with extended analog input ANEX1 and serial data output SOUT4. |
| 100 | P9_5/ANEX0/CLK4 | bidirectional | VCC1 I/O port P9_5 shared with extended analog input ANEX0 and SI/O4 clock CLK4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC1 | -0.3 | 6.5 | V | VCC1 = AVCC | 51 | |
| Analog supply voltage | AVCC | -0.3 | 6.5 | V | VCC1 = AVCC | 51 | |
| Power consumption | Pd | 300 | mW | -40°C < Topr ≤ 85°C | 51 | ||
| Operating temperature (MCU operating) | Topr | -40 | 85 | °C | When the MCU is operating; -40 to 85 °C version | 51 | |
| Operating temperature (flash program/erase, program area) | Topr | 0 | 60 | °C | Flash program erase, program area | 51 | |
| Operating temperature (flash program/erase, data area) | Topr | -40 | 85 | °C | Flash program erase, data area; -40 to 85 version | 51 | |
| Storage temperature | Tstg | -65 | 150 | °C | 51 | ||
| Supply voltage | VCC1, VCC2 | 2.7 | 5 | 5.5 | V | CEC function is not used | 52 |
| Supply voltage with CEC | VCC1, VCC2 | 2.7 | 3.63 | V | CEC function is used | 52 | |
| High peak output current, sum | IOH(sum) | -40 | mA | Sum of IOH(peak) at P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7 | 52 | ||
| High peak output current | IOH(peak) | -10 | mA | Per pin, P0_0 to P14_1 | 52 | ||
| Low peak output current, sum | IOL(sum) | 80 | mA | Sum of IOL(peak) at P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7, P11_0 to P11_7, P14_0 to P14_1 | 53 | ||
| Low peak output current | IOL(peak) | 10 | mA | Per pin, P0_0 to P14_1 | 53 | ||
| Main clock input oscillation frequency | f(XIN) | 2 | 20 | MHz | VCC1 = 2.7 V to 5.5 V | 53 | |
| Sub clock oscillation frequency | f(XCIN) | 32.768 | 50 | kHz | 53 | ||
| PLL clock oscillation frequency | f(PLL) | 10 | 32 | MHz | VCC1 = 2.7 V to 5.5 V | 53 | |
| CPU operation clock | f(BCLK) | 2 | 32 | MHz | 53 | ||
| PLL frequency synthesizer stabilization wait time | tSU(PLL) | 2 | ms | VCC1 = 5.0 V | 53 | ||
| PLL frequency synthesizer stabilization wait time | tSU(PLL) | 3 | ms | VCC1 = 3.0 V | 53 | ||
| Allowable ripple voltage | Vr(VCC1) | 0.5 | Vp-p | VCC1 = 5.0 V | 54 | ||
| Ripple voltage falling gradient | dVr(VCC1)/dt | 0.3 | V/ms | VCC1 = 5.0 V | 54 | ||
| A/D operating clock frequency | φAD | 2 | 25 | MHz | AN0 to AN7 input, ANEX0 to ANEX1 input; 4.0 V ≤ VCC1 ≤ 5.5 V | 56 | |
| A/D operating clock frequency | φAD | 2 | 16 | MHz | AN0 to AN7 input, ANEX0 to ANEX1 input; 3.2 V ≤ VCC1 ≤ 4.0 V | 56 | |
| Output resistance (D/A) | RO | 5 | 6 | 8.2 | kΩ | D/A converter | 56 |
| Reference power supply input current (D/A) | IVREF | 1.5 | mA | See Notes 1 and 2 | 56 | ||
| Voltage detection level Vdet0_0 | Vdet0 | 1.6 | 1.9 | 2.2 | V | When VCC1 is falling | 59 |
| Voltage detection level Vdet0_2 | Vdet0 | 2.55 | 2.85 | 3.15 | V | When VCC1 is falling | 59 |
| Voltage detection level Vdet1_6 | Vdet1 | 2.79 | 3.09 | 3.39 | V | When VCC1 is falling | 59 |
| Voltage detection level Vdet1_B | Vdet1 | 3.54 | 3.84 | 4.14 | V | When VCC1 is falling | 59 |
| Voltage detection level Vdet1_F | Vdet1 | 3.94 | 4.44 | 4.94 | V | When VCC1 is falling | 59 |
| Voltage detection level Vdet2_0 | Vdet2 | 3.5 | 4 | 4.5 | V | When VCC1 is falling | 60 |
| Internal power supply stability time when power is on | td(P-R) | 5 | ms | 61 | |||
| STOP release time | td(R-S) | 150 | μs | 61 | |||
| Low power mode wait mode release time | td(W-S) | 150 | μs | 61 | |||
| 40 MHz on-chip oscillator frequency | fOCO40M | 36 | 40 | 44 | MHz | Average frequency in a 10 ms period | 62 |
| Wait time until 40 MHz on-chip oscillator stabilizes | tsu(fOCO40M) | 2 | ms | 62 | |||
| 125 kHz on-chip oscillator frequency | fOCO-S | 100 | 125 | 150 | kHz | Average frequency in a 10 ms period | 62 |
| Wait time until 125 kHz on-chip oscillator stabilizes | tsu(fOCO-S) | 20 | μs | 62 | |||
| RESET input low pulse width | tw(RSTL) | 10 | μs | VCC1 = VCC2 = 5 V | 68 | ||
| External clock input cycle time | tc | 50 | ns | XIN input, VCC1 = VCC2 = 5 V | 68 | ||
| External clock input high pulse width | tw(H) | 20 | ns | XIN input, VCC1 = VCC2 = 5 V | 68 | ||
| External clock input low pulse width | tw(L) | 20 | ns | XIN input, VCC1 = VCC2 = 5 V | 68 | ||
| CPU rewrite mode CPU clock | f(BCLK) | 10 | MHz | CPU rewrite mode, VCC1 = 2.7 to 5.5 V | 57 | ||
| Data flash read CPU clock | f(BCLK) | 20 | MHz | Data flash read, 3.0 V < VCC1 ≤ 5.5 V | 57 | ||
| Program, erase voltage (program ROM) | 2.7 | 5.5 | V | Flash program ROM 1, 2 | 57 | ||
| Read voltage (program ROM) | 2.7 | 5.5 | V | Topr = -20°C to 85°C/-40°C to 85°C | 57 | ||
| Program, erase temperature (program ROM) | 0 | 60 | °C | Flash program ROM 1, 2 (option -40 to 85 °C) | 57 | ||
| Program, erase temperature (data flash) | -40 | 85 | °C | Data flash; -40 to 85 version | 58 | ||
| Read voltage (data flash) | 2.7 | 5.5 | V | Data flash | 58 | ||
| Low output voltage | VOL | 2 | V | IOL = 5 mA; P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7, P9_0 to P9_7, P10_0 to P10_7, P11_0 to P11_7, P14_0, P14_1 | 63 | ||
| Low output voltage | VOL | 0.45 | V | IOL = 200 μA; P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7, P9_0 to P9_7, P10_0 to P10_7, P11_0 to P11_7, P14_0, P14_1 | 63 | ||
| Hysteresis RESET | VT+ - VT- | 0.5 | 2.5 | V | RESET | 64 | |
| High input current | IIH | 5 | μA | VI = 5 V; P0 to P14, XIN, RESET, CNVSS, BYTE | 64 | ||
| Low input current | IIL | -5 | μA | VI = 0 V; P0 to P14, XIN, RESET, CNVSS, BYTE | 64 | ||
| Pull-up resistance | RPULLUP | 30 | 50 | 100 | kΩ | VI = 0 V | 64 |
| RAM retention voltage | VRAM | 1.8 | V | In stop mode | 64 | ||
| Power supply current, high-speed mode (32 MHz) | ICC | 26 | mA | f(BCLK)=32 MHz, XIN=4 MHz square wave, PLL x8, 125 kHz OCO stopped | 66 | ||
| Power supply current, 40 MHz on-chip oscillator mode | ICC | 18 | mA | Main clock stopped, 40 MHz OCO on, divide-by-4 (f(BCLK)=10 MHz) | 66 | ||
| Power supply current, stop mode | ICC | 1.7 | μA | Main clock stopped, 40 MHz OCO stopped, 125 kHz OCO stopped, peripheral clock stopped, Topr = 25°C | 66 | ||
| Power supply current, flash memory program | ICC | 20 | mA | f(BCLK)=10 MHz, PM17=1 (one wait), VCC1 = 5.0 V | 66 | ||
| Power supply current, flash memory erase | ICC | 30 | mA | f(BCLK)=10 MHz, PM17=1 (one wait), VCC1 = 5.0 V | 66 | ||
| Power supply current, high-speed mode (32 MHz, 3 V) | ICC | 26 | mA | VCC1=VCC2=2.7 to 3.3 V; f(BCLK)=32 MHz, XIN=4 MHz square wave, PLL x8, 125 kHz OCO stopped | 89 | ||
| Power supply current, flash memory erase (3 V) | ICC | 30 | mA | f(BCLK)=10 MHz, PM17=1 (one wait), VCC1 = 3.0 V | 89 | ||
| Low output voltage (3 V) | VOL | 0.5 | V | IOL = 1 mA; P0 to P14 ports | 87 | ||
| Hysteresis (3 V) | VT+ - VT- | 0.2 | 1 | V | Listed digital inputs (HOLD, RDY, TA0IN to TA4IN, INT0 to INT7, etc.) | 87 | |
| Hysteresis RESET (3 V) | VT+ - VT- | 0.2 | 1.8 | V | RESET | 87 | |
| Pull-up resistance (3 V) | RPULLUP | 50 | 80 | 150 | kΩ | VI = 0 V | 87 |
| High input current (3 V) | IIH | 4 | μA | VI = 3 V | 87 | ||
| Low input current (3 V) | IIL | -4 | μA | VI = 0 V | 87 |
CAD (KiCad official)
- Symbol:
R5F3650MDFB#30 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
r5f3650mdfb-30-etched.step/r5f3650mdfb-30-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f3650mdfb-30.step/r5f3650mdfb-30.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (115 pp, sha256
eef8d1f6e63f4dcf, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).