component
R5F21276SNFP#X6
Public Made by Adomby adom
RENESAS RENESAS, LQFP-32(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownR5F21276SNFP#X6
RENESAS · RENESAS · LQFP-32(7x7)
R5F21276SNFP#X6 from RENESAS, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P3_5 | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as TRCIOD, SSCK, or SCL (I2C clock I/O). |
| 2 | P3_7 | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as TRAO, RXD1, (TXD1), or SSO. |
| 3 | RESET | input | An input 'L' on this pin resets the MCU. |
| 4 | XOUT/XCOUT/P4_7 | output | XIN clock output (XOUT); for the N version it is the XCIN clock output (XCOUT), and it may alternatively be used as input-only port P4_7; leave XOUT open when an external clock is applied to XIN. |
| 5 | VSS/AVSS | power_in | Ground pin: apply 0 V to VSS; AVSS is the analog ground for the A/D converter, with a capacitor connected between AVCC and AVSS. |
| 6 | XIN/XCIN/P4_6 | input | XIN clock input (connect a ceramic resonator or crystal between XIN and XOUT, or drive an external clock into XIN); for the N version XCIN is also available, and P4_6 is an input-only port. |
| 7 | VCC/AVCC | power_in | Power supply: apply 2.2 to 5.5 V to VCC for the N version (J and K versions are 2.7 to 5.5 V); AVCC supplies the A/D converter. |
| 8 | MODE | input | Connect this pin to VCC via a resistor. |
| 9 | P4_5/INT0/(RXD1) | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as INT0 interrupt input or RXD1. |
| 10 | P1_7/TRAIO/INT1 | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as INT1 interrupt input or TRAIO (Timer RA I/O); P1_x pins also serve as LED drive ports in the N version. |
| 11 | P3_6/(TXD1)/(RXD1)/(INT1) | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that can alternatively be assigned to INT1, TXD1, or RXD1 by program. |
| 12 | P3_1/TRBO | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as the Timer RB output TRBO. |
| 13 | P5_4/TRCIOD | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as Timer RC I/O TRCIOD. |
| 14 | P5_3/TRCIOC | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as Timer RC I/O TRCIOC. |
| 15 | P1_6/CLK0/(SSI) | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as serial clock I/O CLK0 or, by program, SSI. |
| 16 | P1_5/RXD0/(TRAIO)/(INT1) | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as serial receive data input RXD0, or by program TRAIO or INT1. |
| 17 | P1_4/TXD0 | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as serial transmit data output TXD0. |
| 18 | P1_3/KI3/AN11/(TRBO) | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as key input interrupt KI3, A/D analog input AN11, or by program TRBO. |
| 19 | P1_2/KI2/AN10/TRCIOB | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as key input interrupt KI2, Timer RC I/O TRCIOB, or A/D analog input AN10. |
| 20 | VREF/P4_2 | power_in | Reference voltage input to the A/D converter; P4_2 is an input-only port on this pin. |
| 21 | P1_1/KI1/AN9/TRCIOA/TRCTRG | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as key input interrupt KI1, Timer RC I/O TRCIOA, Timer RC external trigger TRCTRG, or A/D analog input AN9. |
| 22 | P1_0/KI0/AN8 | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as key input interrupt KI0 or A/D analog input AN8. |
| 23 | P3_3/INT3/SSI/TRCCLK | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as INT3 interrupt input, Timer RC external clock input TRCCLK, or SSI data I/O. |
| 24 | P3_4/SDA/SCS/(TRCIOC) | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as SCS chip-select I/O, SDA (I2C data I/O), or by program TRCIOC. |
| 25 | P0_7/AN0 | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as A/D analog input AN0. |
| 26 | P0_6/AN1 | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as A/D analog input AN1. |
| 27 | P0_5/AN2/CLK1 | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as serial clock I/O CLK1 or A/D analog input AN2. |
| 28 | P0_4/AN3/TREO | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as Timer RE output TREO or A/D analog input AN3. |
| 29 | P0_3/AN4 | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as A/D analog input AN4. |
| 30 | P0_2/AN5 | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as A/D analog input AN5. |
| 31 | P0_1/AN6 | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as A/D analog input AN6. |
| 32 | P0_0/AN7/(TXD1) | bidirectional | CMOS I/O port pin (direction set per pin by a register, optional pull-up when input) that alternately serves as A/D analog input AN7 or, by program, TXD1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC/AVCC | -0.3 | 6.5 | V | 26 | ||
| Input voltage | VI | -0.3 | V | 26 | |||
| Output voltage | VO | -0.3 | V | 26 | |||
| Power dissipation | Pd | 500 | mW | Topr = 25°C | 26 | ||
| Operating ambient temperature | Topr | -20 | 85 | °C | N version | 26 | |
| Storage temperature | Tstg | -65 | 150 | °C | 26 | ||
| Supply voltage | VCC/AVCC | 2.2 | 5.5 | V | 26 | ||
| Input 'L' voltage | VIL | 0 | V | 26 | |||
| Peak sum output 'H' current | IOH(sum) | -160 | mA | Sum of all pins IOH(peak) | 26 | ||
| Average sum output 'H' current | IOH(sum) | -80 | mA | Sum of all pins IOH(avg) | 26 | ||
| Peak output 'H' current | IOH(peak) | -10 | mA | Except P1_0 to P1_7 | 26 | ||
| Peak output 'H' current | IOH(peak) | -40 | mA | P1_0 to P1_7 | 26 | ||
| Average output 'H' current | IOH(avg) | -5 | mA | Except P1_0 to P1_7 | 26 | ||
| Average output 'H' current | IOH(avg) | -20 | mA | P1_0 to P1_7 | 26 | ||
| Peak sum output 'L' currents | IOL(sum) | 160 | mA | Sum of all pins IOL(peak) | 26 | ||
| Average sum output 'L' currents | IOL(sum) | 80 | mA | Sum of all pins IOL(avg) | 26 | ||
| Peak output 'L' current | IOL(peak) | 10 | mA | Except P1_0 to P1_7 | 26 | ||
| Peak output 'L' current | IOL(peak) | 40 | mA | P1_0 to P1_7 | 26 | ||
| Average output 'L' current | IOL(avg) | 5 | mA | Except P1_0 to P1_7 | 26 | ||
| Average output 'L' current | IOL(avg) | 20 | mA | P1_0 to P1_7 | 26 | ||
| XIN clock input oscillation frequency | f(XIN) | 0 | 20 | MHz | 3.0 V ≤ VCC ≤ 5.5 V | 26 | |
| XIN clock input oscillation frequency | f(XIN) | 0 | 10 | MHz | 2.7 V ≤ VCC < 3.0 V | 26 | |
| XIN clock input oscillation frequency | f(XIN) | 0 | 5 | MHz | 2.2 V ≤ VCC < 2.7 V | 26 | |
| XCIN clock input oscillation frequency | f(XCIN) | 0 | 70 | kHz | 2.2 V ≤ VCC ≤ 5.5 V | 26 | |
| High-speed on-chip oscillator clock frequency | 20 | MHz | OCD2 = 1, FRA01 = 1, 3.0 V ≤ VCC ≤ 5.5 V | 26 | |||
| High-speed on-chip oscillator clock frequency | 10 | MHz | OCD2 = 1, FRA01 = 1, 2.7 V ≤ VCC ≤ 5.5 V | 26 | |||
| High-speed on-chip oscillator clock frequency | 5 | MHz | OCD2 = 1, FRA01 = 1, 2.2 V ≤ VCC ≤ 5.5 V | 26 | |||
| Output 'L' voltage | VOL | 2 | V | Except P1_0 to P1_7, XOUT; IOL = 5 mA; VCC = 5 V | 38 | ||
| Output 'L' voltage | VOL | 0.45 | V | Except P1_0 to P1_7, XOUT; IOL = 200 µA; VCC = 5 V | 38 | ||
| Output 'L' voltage (drive capacity HIGH) | VOL | 2 | V | P1_0 to P1_7; IOL = 20 mA; VCC = 5 V | 38 | ||
| Output 'L' voltage (drive capacity LOW) | VOL | 2 | V | P1_0 to P1_7; IOL = 5 mA; VCC = 5 V | 38 | ||
| Output 'L' voltage (XOUT drive capacity HIGH) | VOL | 2 | V | XOUT; IOL = 1 mA; VCC = 5 V | 38 | ||
| Output 'L' voltage (XOUT drive capacity LOW) | VOL | 2 | V | XOUT; IOL = 500 µA; VCC = 5 V | 38 | ||
| Hysteresis | VT+-VT- | 0.1 | 0.5 | V | INT0, INT1, INT3, KI0, KI1, KI2, KI3, TRAIO, RXD0, RXD1, CLK0, CLK1, SSI, SCL, SDA, SSO; VCC = 5 V | 38 | |
| Hysteresis | VT+-VT- | 0.1 | 1 | V | RESET; VCC = 5 V | 38 | |
| Input 'H' current | IIH | 5 | µA | VI = 5 V, VCC = 5 V | 38 | ||
| Input 'L' current | IIL | -5 | µA | VI = 0 V, VCC = 5 V | 38 | ||
| Pull-up resistance | RPULLUP | 30 | 50 | 167 | kΩ | VI = 0 V, VCC = 5 V | 38 |
| RAM hold voltage | VRAM | 1.8 | V | During stop mode | 38 | ||
| Power supply current, high-speed clock mode, XIN = 20 MHz, no division | ICC | 10 | 17 | mA | VCC = 3.3 to 5.5 V; single-chip mode; XIN square wave; HS OCO off; LS OCO on = 125 kHz | 39 | |
| Power supply current, high-speed clock mode, XIN = 16 MHz, no division | ICC | 9 | 15 | mA | VCC = 3.3 to 5.5 V; single-chip mode; XIN square wave; HS OCO off; LS OCO on = 125 kHz | 39 | |
| Power supply current, high-speed on-chip oscillator mode, fOCO = 20 MHz, no division | ICC | 10 | 15 | mA | VCC = 3.3 to 5.5 V; XIN clock off; fOCO = 20 MHz (J version); LS OCO on = 125 kHz | 39 | |
| Power supply current, low-speed on-chip oscillator mode, divide-by-8 | ICC | 130 | 300 | µA | VCC = 3.3 to 5.5 V; XIN clock off; HS OCO off; LS OCO on = 125 kHz; FMR47 = 1 | 39 | |
| Power supply current, low-speed clock mode, XCIN = 32 kHz | ICC | 130 | 300 | µA | VCC = 3.3 to 5.5 V; XIN clock off; HS OCO off; LS OCO off; FMR47 = 1 | 39 | |
| Power supply current, wait mode, peripheral clock operation | ICC | 25 | 75 | µA | VCC = 3.3 to 5.5 V; WAIT executed; VCA27 = VCA26 = VCA25 = 0; VCA20 = 1 | 40 | |
| Power supply current, wait mode, peripheral clock off | ICC | 23 | 60 | µA | VCC = 3.3 to 5.5 V; WAIT executed; VCA27 = VCA26 = VCA25 = 0; VCA20 = 1 | 40 | |
| Power supply current, stop mode | ICC | 0.8 | 3 | µA | VCC = 3.3 to 5.5 V; Topr = 25°C; XIN clock off; peripheral clock off; CM10 = 1 | 40 | |
| Voltage detection level (Vdet0) | Vdet0 | 2.2 | 2.3 | 2.4 | V | 30 | |
| Voltage detection level (Vdet1) | Vdet1 | 2.7 | 2.85 | 3 | V | 30 | |
| Voltage detection level (Vdet2) | Vdet2 | 3.3 | 3.6 | 3.9 | V | 30 | |
| Power-on reset valid voltage | Vpor1 | 0.1 | V | 31 | |||
| External power VCC rise gradient | trth | 20 | mV/msec | External power VCC rise gradient | 31 | ||
| Program/erase endurance (program ROM) | 1000 | times | R8C/27 Group | 28 | |||
| Byte program time | 50 | 400 | µs | 28 | |||
| Block erase time | 0.4 | 9 | s | 28 | |||
| High-speed on-chip oscillator frequency | fOCO40M | 39.2 | 40 | 40.8 | MHz | VCC = 4.75 to 5.25 V, 0°C ≤ Topr ≤ 60°C | 32 |
| High-speed on-chip oscillator frequency | fOCO40M | 38.8 | 40 | 41.2 | MHz | VCC = 3.0 to 5.5 V, -20°C ≤ Topr ≤ 85°C | 32 |
| Low-speed on-chip oscillator frequency | fOCO-S | 30 | 125 | 250 | kHz | 32 | |
| Resistor ladder | Rladder | 10 | 40 | kΩ | Vref = AVCC | 27 | |
| XIN input cycle time | tc(XIN) | 50 | ns | VCC = 5 V | 41 |
CAD (KiCad official)
- Symbol:
R5F21276SNFP#X6 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
r5f21276snfp-x6-etched.step/r5f21276snfp-x6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f21276snfp-x6.step/r5f21276snfp-x6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (75 pp, sha256
056b994dab86c87a, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).