main
Ray Publish 0.1.1 a28f9c3

R5F21246SNFP#V2

RENESAS · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-52(10x10)

R5F21246SNFP#V2 from RENESAS, in a LQFP-52(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC no_connect Non-connection (Figure 1.4: 'NC: Non-Connection').
2 P3_5/SCL/SSCK bidirectional I/O port P3_5, also the I2C SCL and clock synchronous serial SSCK pin; set-up per Table 1.5 with direction register and optional program-selected pull-up.
3 P3_3/SSI bidirectional I/O port P3_3, also the clock synchronous serial I/O with chip select data I/O pin SSI.
4 P3_4/SDA/SCS bidirectional I/O port P3_4, also the I2C SDA data I/O pin and the chip-select signal SCS.
5 MODE input Mode pin; connect this pin to VCC via a resistor.
6 P4_3/XCIN input XCIN clock input for the 32 kHz crystal oscillator (connect crystal between XCIN and XCOUT; with an external clock input here and XCOUT left open); the pin also serves as I/O port P4_3.
7 P4_4/XCOUT output XCIN clock output for the 32 kHz crystal oscillator; the pin also serves as I/O port P4_4 when the sub clock is not used.
8 RESET input Reset input; a 'L' level on this pin resets the MCU.
9 XOUT/P4_7 output XIN clock output for the main oscillator (leave open when an external clock is input to XIN); P4_7 is an input-only port when XOUT is not used.
10 VSS/AVSS power_in Ground: apply 0 V to the VSS pin (also the analog ground for the A/D converter).
11 P4_6/XIN input XIN clock input for the on-chip oscillator circuit (ceramic resonator or crystal between XIN and XOUT, or external clock into XIN); P4_6 is an input-only port.
12 VCC/AVCC power_in Power supply: apply 2.2 V to 5.5 V to the VCC pin; it also supplies the A/D converter (AVCC).
13 P2_7/TRDIOD1 bidirectional I/O port P2_7 with LED drive capability and Timer RD I/O function TRDIOD1.
14 P2_6/TRDIOC1 bidirectional I/O port P2_6 with LED drive capability and Timer RD I/O function TRDIOC1.
15 P2_5/TRDIOB1 bidirectional I/O port P2_5 with LED drive capability and Timer RD I/O function TRDIOB1.
16 P2_4/TRDIOA1 bidirectional I/O port P2_4 with LED drive capability and Timer RD I/O function TRDIOA1.
17 P2_3/TRDIOD0 bidirectional I/O port P2_3 with LED drive capability and Timer RD I/O function TRDIOD0.
18 P2_2/TRDIOC0 bidirectional I/O port P2_2 with LED drive capability and Timer RD I/O function TRDIOC0.
19 P2_1/TRDIOB0 bidirectional I/O port P2_1 with LED drive capability and Timer RD I/O function TRDIOB0.
20 P2_0/TRDIOA0/TRDCLK bidirectional I/O port P2_0 with LED drive capability; alternate functions are Timer RD I/O TRDIOA0 and external clock input TRDCLK.
21 P1_7/TRAIO/INT1 bidirectional I/O port P1_7, also Timer RA I/O TRAIO and external interrupt INT1.
22 P1_6/CLK0 bidirectional I/O port P1_6, also the UART0 transfer clock I/O pin CLK0.
23 P1_5/RXD0/(TRAIO)/(INT1) bidirectional I/O port P1_5, UART0 serial data input RXD0; TRAIO and INT1 may be assigned to this pin by a program (alternate assignment in parentheses).
24 P1_4/TXD0 bidirectional I/O port P1_4, also the UART0 serial data output TXD0.
25 P1_3/KI3/AN11 bidirectional I/O port P1_3, also key input interrupt KI3 and A/D analog input AN11.
26 NC no_connect Non-connection (Figure 1.4: 'NC: Non-Connection').
27 P4_5/INT0 bidirectional I/O port P4_5, also external interrupt INT0 (INT0 is the Timer RD input pin).
28 P6_6/INT2/TXD1 bidirectional I/O port P6_6, also external interrupt INT2 and UART1 serial data output TXD1.
29 P6_7/INT3/RXD1 bidirectional I/O port P6_7, also external interrupt INT3 and UART1 serial data input RXD1.
30 P1_2/KI2/AN10 bidirectional I/O port P1_2, also key input interrupt KI2 and A/D analog input AN10.
31 P1_1/KI1/AN9 bidirectional I/O port P1_1, also key input interrupt KI1 and A/D analog input AN9.
32 P1_0/KI0/AN8 bidirectional I/O port P1_0, also key input interrupt KI0 and A/D analog input AN8.
33 P3_1/TRBO bidirectional I/O port P3_1, also Timer RB output TRBO.
34 P3_0/TRAO bidirectional I/O port P3_0, also Timer RA output TRAO.
35 P6_5/CLK1 bidirectional I/O port P6_5, also the UART1 transfer clock I/O pin CLK1.
36 P6_4 bidirectional I/O port P6_4 (general-purpose I/O, direction set per pin by the direction register).
37 P6_3 bidirectional I/O port P6_3 (general-purpose I/O, direction set per pin by the direction register).
38 P0_7/AN0 bidirectional I/O port P0_7, also A/D analog input AN0.
39 NC no_connect Non-connection (Figure 1.4: 'NC: Non-Connection').
40 NC no_connect Non-connection (Figure 1.4: 'NC: Non-Connection').
41 P0_6/AN1 bidirectional I/O port P0_6, also A/D analog input AN1.
42 P0_5/AN2 bidirectional I/O port P0_5, also A/D analog input AN2.
43 P0_4/AN3 bidirectional I/O port P0_4, also A/D analog input AN3.
44 P4_2/VREF input Reference voltage input to the A/D converter; the pin is also the input-only port P4_2.
45 P6_0/TREO bidirectional I/O port P6_0, also Timer RE divided clock output TREO.
46 P6_2 bidirectional I/O port P6_2 (general-purpose I/O, direction set per pin by the direction register).
47 P6_1 bidirectional I/O port P6_1 (general-purpose I/O, direction set per pin by the direction register).
48 P0_3/AN4 bidirectional I/O port P0_3, also A/D analog input AN4.
49 P0_2/AN5 bidirectional I/O port P0_2, also A/D analog input AN5.
50 P0_1/AN6 bidirectional I/O port P0_1, also A/D analog input AN6.
51 P0_0/AN7 bidirectional I/O port P0_0, also A/D analog input AN7.
52 P3_7/SSO bidirectional I/O port P3_7, also clock synchronous serial I/O with chip select data I/O pin SSO.

Key specifications

Parameter Value
Manufacturer RENESAS
Package LQFP-52(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 52

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC/AVCC -0.3 6.5 V 27
Input voltage VI -0.3 V max printed as VCC + 0.3 V 27
Output voltage VO -0.3 V max printed as VCC + 0.3 V 27
Power dissipation Pd 500 mW Topr = 25°C 27
Operating ambient temperature Topr -20 85 °C N version 27
Storage temperature Tstg -65 150 °C 27
Supply voltage VCC/AVCC 2.2 5.5 V 28
Input L voltage VIL 0 V max printed as 0.2 VCC 28
Peak sum output H current IOH(sum) -160 mA Sum of all pins IOH(peak) 28
Average sum output H current IOH(sum) -80 mA Sum of all pins IOH(avg) 28
Peak output H current IOH(peak) -10 mA Except P2_0 to P2_7 28
Peak output H current IOH(peak) -40 mA P2_0 to P2_7 28
Average output H current IOH(avg) -5 mA Except P2_0 to P2_7 28
Average output H current IOH(avg) -20 mA P2_0 to P2_7 28
Peak sum output L current IOL(sum) 160 mA Sum of all pins IOL(peak) 28
Average sum output L current IOL(sum) 80 mA Sum of all pins IOL(avg) 28
Peak output L current IOL(peak) 10 mA Except P2_0 to P2_7 28
Peak output L current IOL(peak) 40 mA P2_0 to P2_7 28
Average output L current IOL(avg) 5 mA Except P2_0 to P2_7 28
Average output L current IOL(avg) 20 mA P2_0 to P2_7 28
XIN clock input oscillation frequency f(XIN) 0 20 MHz 3.0 V ≤ VCC ≤ 5.5 V 28
XIN clock input oscillation frequency f(XIN) 0 10 MHz 2.7 V ≤ VCC < 3.0 V 28
XIN clock input oscillation frequency f(XIN) 0 5 MHz 2.2 V ≤ VCC < 2.7 V 28
XCIN clock input oscillation frequency f(XCIN) 0 70 kHz 2.2 V ≤ VCC ≤ 5.5 V 28
Voltage detection level (voltage detection 0) Vdet0 2.2 2.3 2.4 V 32
MCU operating voltage minimum value Vccmin 2.2 V 32
Voltage detection level (voltage detection 1) Vdet1 2.7 2.85 3 V 32
Voltage detection level (voltage detection 2) Vdet2 3.3 3.6 3.9 V 32
Power-on reset valid voltage Vpor1 0.1 V 33
Power-on reset or voltage monitor 0 reset valid voltage Vpor2 0 V max printed as Vdet0 33
External power VCC rise gradient trth 20 mV/msec 33
High-speed on-chip oscillator frequency fOCO40M 39.2 40 40.8 MHz VCC = 4.75 to 5.25 V, 0°C ≤ Topr ≤ 60°C 34
High-speed on-chip oscillator frequency fOCO40M 38.8 40 41.2 MHz VCC = 3.0 to 5.5 V, -20°C ≤ Topr ≤ 85°C 34
High-speed on-chip oscillator frequency fOCO40M 34 40 46 MHz VCC = 2.2 to 5.5 V, -40°C ≤ Topr ≤ 85°C 34
Low-speed on-chip oscillator frequency fOCO-S 30 125 250 kHz 34
Program/erase endurance 100 times R8C/24 Group 30
Byte program time 50 400 µs 30
Block erase time 0.4 9 s 30
Program, erase voltage 2.7 5.5 V 30
Read voltage 2.2 5.5 V 30
Program, erase temperature 0 60 °C 30
Data hold time 20 year Ambient temperature = 55°C 30
Resolution 10 Bit Vref = AVCC 29
Absolute accuracy -3 3 LSB 10-bit mode, φAD = 10 MHz, Vref = AVCC = 5.0 V 29
Resistor ladder Rladder 10 40 kΩ Vref = AVCC 29
Reference voltage Vref 2.2 V max printed as AVCC 29
Power supply current (high-speed clock mode, 20 MHz) ICC 10 17 mA VCC = 3.3 to 5.5 V; XIN = 20 MHz square wave, no division, HS on-chip oscillator off, LOCO on = 125 kHz 41
Power supply current (high-speed clock mode, 16 MHz) ICC 9 15 mA VCC = 3.3 to 5.5 V; XIN = 16 MHz square wave, no division 41
Power supply current (high-speed on-chip oscillator mode, 20 MHz) ICC 10 15 mA VCC = 3.3 to 5.5 V; XIN clock off, fOCO = 20 MHz, no division 41
Power supply current (low-speed on-chip oscillator mode) ICC 130 300 µA VCC = 3.3 to 5.5 V; LOCO on = 125 kHz, divide-by-8, FMR47 = 1 41
Power supply current (stop mode) ICC 0.8 3 µA XIN clock off, Topr = 25°C, CM10 = 1, peripheral clock off 42
Output L voltage VOL 2 V IOL = 5 mA (except P2_0 to P2_7, XOUT) 40
Output L voltage VOL 0.45 V IOL = 200 µA (except P2_0 to P2_7, XOUT) 40
Input H current IIH 5 µA VI = 5 V, VCC = 5 V 40
Input L current IIL -5 µA VI = 0 V, VCC = 5 V 40
Pull-up resistance RPULLUP 30 50 167 kΩ VI = 0 V, VCC = 5 V 40
Hysteresis (INT0-INT3, KI0-KI3, TRAIO, RXD0, RXD1, CLK0, CLK1, SSI, SCL, SDA, SSO) VT+-VT- 0.1 0.5 V 40
Hysteresis (RESET) VT+-VT- 0.1 1 V 40
RAM hold voltage VRAM 1.8 V During stop mode 40

CAD (KiCad official)

  • Symbol: R5F21246SNFP#V2
  • Footprint: Package_QFP:LQFP-52_10x10mm_P0.65mm
  • 3D model: LQFP-52(10x10) (KiCad packages3D, STEP)
  • 3D model files: r5f21246snfp-v2-etched.step / r5f21246snfp-v2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r5f21246snfp-v2.step / r5f21246snfp-v2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet, copy hosted by LCSC (61 pp, sha256 0e67561c4ef08d1f, retrieved 2026-11-20)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF