Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

R5F2123CJFP#U0

RENESAS · Pre-ordered MCUs · LQFP-48(7x7)

R5F2123CJFP#U0 from RENESAS, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P3_5/SCL/SSCK bidirectional CMOS I/O port P3_5 that also serves as the I2C bus clock I/O (SCL) and clock synchronous serial I/O clock (SSCK) pin.
2 P3_3/SSI bidirectional CMOS I/O port P3_3 that also serves as the clock synchronous serial I/O with chip select data I/O (SSI) pin.
3 P3_4/SDA/SCS bidirectional CMOS I/O port P3_4 that also serves as the I2C bus data I/O (SDA) and chip-select signal I/O (SCS) pin.
4 MODE input Connect this pin to VCC via a resistor.
5 P4_3 bidirectional CMOS I/O port P4_3 whose direction can be set individually and whose pull-up resistor can be enabled by a program when set to input.
6 P4_4 bidirectional CMOS I/O port P4_4 whose direction can be set individually and whose pull-up resistor can be enabled by a program when set to input.
7 RESET input Input "L" on this pin resets the MCU.
8 P4_7/XOUT output XIN clock output pin for the crystal or ceramic resonator circuit; P4_7 is an input-only port.
9 VSS/AVSS power_in Apply 0 V to the VSS pin; AVSS is the analog ground for the A/D converter.
10 P4_6/XIN input XIN clock input pin; connect a ceramic resonator or crystal oscillator between XIN and XOUT, or input an external clock here with XOUT left open. P4_6 is an input-only port.
11 VCC/AVCC power_in Apply 2.7 V to 5.5 V to the VCC pin; AVCC supplies the A/D converter, with a capacitor connected between AVCC and AVSS.
12 P2_7/TRDIOD1 bidirectional CMOS I/O port P2_7 that also serves as the Timer RD I/O pin TRDIOD1.
13 P2_6/TRDIOC1 bidirectional CMOS I/O port P2_6 that also serves as the Timer RD I/O pin TRDIOC1.
14 P2_5/TRDIOB1 bidirectional CMOS I/O port P2_5 that also serves as the Timer RD I/O pin TRDIOB1.
15 P2_4/TRDIOA1 bidirectional CMOS I/O port P2_4 that also serves as the Timer RD I/O pin TRDIOA1.
16 P2_3/TRDIOD0 bidirectional CMOS I/O port P2_3 that also serves as the Timer RD I/O pin TRDIOD0.
17 P2_2/TRDIOC0 bidirectional CMOS I/O port P2_2 that also serves as the Timer RD I/O pin TRDIOC0.
18 P2_1/TRDIOB0 bidirectional CMOS I/O port P2_1 that also serves as the Timer RD I/O pin TRDIOB0.
19 P2_0/TRDIOA0/TRDCLK bidirectional CMOS I/O port P2_0 that also serves as the Timer RD I/O pin TRDIOA0 and external clock input pin TRDCLK.
20 P1_7/TRAIO/INT1 bidirectional CMOS I/O port P1_7 that also serves as the Timer RA I/O pin TRAIO and the INT1 interrupt input.
21 P1_6/CLK0 bidirectional CMOS I/O port P1_6 that also serves as the serial interface transfer clock I/O pin CLK0.
22 P1_5/RXD0/(TRAIO)/(INT1) bidirectional CMOS I/O port P1_5 that serves as the serial data input RXD0; TRAIO and INT1 can be assigned to this pin by a program.
23 P1_4/TXD0 bidirectional CMOS I/O port P1_4 that also serves as the serial data output pin TXD0.
24 P1_3/KI3/AN11 bidirectional CMOS I/O port P1_3 that also serves as key input interrupt pin KI3 and A/D analog input AN11.
25 P4_5/INT0 bidirectional CMOS I/O port P4_5 that also serves as the INT0 interrupt input pin.
26 P6_6/INT2/TXD1 bidirectional CMOS I/O port P6_6 that also serves as the INT2 interrupt input and serial data output TXD1.
27 P6_7/INT3/RXD1 bidirectional CMOS I/O port P6_7 that also serves as the INT3 interrupt input and serial data input RXD1.
28 P1_2/KI2/AN10 bidirectional CMOS I/O port P1_2 that also serves as key input interrupt pin KI2 and A/D analog input AN10.
29 P1_1/KI1/AN9 bidirectional CMOS I/O port P1_1 that also serves as key input interrupt pin KI1 and A/D analog input AN9.
30 P1_0/KI0/AN8 bidirectional CMOS I/O port P1_0 that also serves as key input interrupt pin KI0 and A/D analog input AN8.
31 P3_1/TRBO bidirectional CMOS I/O port P3_1 that also serves as the Timer RB output pin TRBO.
32 P3_0/TRAO bidirectional CMOS I/O port P3_0 that also serves as the Timer RA output pin TRAO.
33 P6_5 bidirectional CMOS I/O port P6_5 whose direction can be set individually and whose pull-up resistor can be enabled by a program when set to input.
34 P6_4 bidirectional CMOS I/O port P6_4 whose direction can be set individually and whose pull-up resistor can be enabled by a program when set to input.
35 P6_3 bidirectional CMOS I/O port P6_3 whose direction can be set individually and whose pull-up resistor can be enabled by a program when set to input.
36 P0_7/AN0 bidirectional CMOS I/O port P0_7 that also serves as A/D analog input AN0.
37 P0_6/AN1 bidirectional CMOS I/O port P0_6 that also serves as A/D analog input AN1.
38 P0_5/AN2 bidirectional CMOS I/O port P0_5 that also serves as A/D analog input AN2.
39 P0_4/AN3 bidirectional CMOS I/O port P0_4 that also serves as A/D analog input AN3.
40 P4_2/VREF power_in Reference voltage input pin to the A/D converter; P4_2 is an input-only port.
41 P6_0/TREO bidirectional CMOS I/O port P6_0 that also serves as the Timer RE divided clock output pin TREO.
42 P6_2/CRX0 bidirectional CMOS I/O port P6_2 that also serves as the CAN data input pin CRX0.
43 P6_1/CTX0 bidirectional CMOS I/O port P6_1 that also serves as the CAN data output pin CTX0.
44 P0_3/AN4 bidirectional CMOS I/O port P0_3 that also serves as A/D analog input AN4.
45 P0_2/AN5 bidirectional CMOS I/O port P0_2 that also serves as A/D analog input AN5.
46 P0_1/AN6 bidirectional CMOS I/O port P0_1 that also serves as A/D analog input AN6.
47 P0_0/AN7 bidirectional CMOS I/O port P0_0 that also serves as A/D analog input AN7.
48 P3_7/SSO bidirectional CMOS I/O port P3_7 that also serves as the clock synchronous serial I/O data I/O pin SSO.

Key specifications

Parameter Value
Manufacturer RENESAS
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC/AVCC -0.3 6.5 V 30
Input voltage VI -0.3 V upper limit printed as VCC+0.3 30
Output voltage VO -0.3 V upper limit printed as VCC+0.3 30
Power dissipation Pd 300 mW -40°C ≤ Topr ≤ 85°C 30
Operating ambient temperature Topr -40 85 °C D, J version 30
Storage temperature Tstg -65 150 °C 30
Supply voltage VCC/AVCC 2.7 5.5 V 30
Peak sum output H current IOH(sum) -60 mA Sum of all Pins IOH (peak) 30
Peak output H current IOH(peak) -10 mA 30
Average output H current IOH(avg) -5 mA 30
Peak sum output L currents IOL(sum) 60 mA Sum of all Pins IOL (peak) 30
Peak output L currents IOL(peak) 10 mA 30
Average output L current IOL(avg) 5 mA 30
XIN clock input oscillation frequency f(XIN) 0 20 MHz 3.0 V ≤ VCC ≤ 5.5 V, -40°C ≤ Topr ≤ 85°C 30
XIN clock input oscillation frequency f(XIN) 0 10 MHz 2.7 V ≤ VCC < 3.0 V 30
High-speed on-chip oscillator clock frequency f(OCO) 20 MHz FRA01 = 1, 3.0 V ≤ VCC ≤ 5.5 V, -40°C ≤ Topr ≤ 85°C 30
High-speed on-chip oscillator clock frequency f(OCO) 10 MHz FRA01 = 1 30
Resolution 10 Bits Vref = AVCC 31
Absolute accuracy 10-bit mode -3 3 LSB φAD = 10 MHz, Vref = AVCC = 5.0 V 31
Absolute accuracy 8-bit mode -2 2 LSB φAD = 10 MHz, Vref = AVCC = 5.0 V 31
Absolute accuracy 10-bit mode -5 5 LSB φAD = 10 MHz, Vref = AVCC = 3.3 V 31
Resistor ladder Rladder 10 40 kΩ Vref = AVCC 31
Conversion time 10-bit mode tconv 3.3 µs φAD = 10 MHz, Vref = AVCC = 5.0 V 31
Program/erase endurance (R8C/23 Group) 1000 times Program ROM, R8C/23 Group 32
Byte program time 50 400 µs Program ROM 32
Program, erase voltage 2.7 5.5 V Program ROM 32
Program, erase temperature 0 60 °C Program ROM 32
Data hold time 20 year Ambient temperature = 55°C 32
Program/erase endurance (data flash) 10000 times Data flash block A, block B 33
Program, erase temperature (data flash) -40 85 °C Data flash block A, block B 33
Voltage detection 1 level Vdet1 2.7 2.85 3 V 34
Voltage monitor 1 reset generation time td(Vdet1-A) 40 200 µs 34
Waiting time until voltage detection 1 circuit operation starts td(E-A) 100 µs 34
MCU operating voltage minimum value Vccmin 2.7 V 34
Voltage detection 2 level Vdet2 3.3 3.6 3.9 V 34
Voltage monitor 2 reset/interrupt request generation time td(Vdet2-A) 40 200 µs 34
Waiting time until voltage detection 2 circuit operation starts td(E-A) 100 µs 34
Power-on reset valid voltage Vpor1 0.1 V 35
External power VCC rise gradient trth 20 mV/msec VCC ≤ 3.6 V 35
External power VCC rise gradient trth 20 2000 mV/msec VCC > 3.6 V 35
High-speed on-chip oscillator frequency fOCO40M 39.2 40 40.8 MHz VCC = 4.75 V to 5.25 V, 0°C ≤ Topr ≤ 60°C 36
High-speed on-chip oscillator frequency fOCO40M 38.8 40 41.2 MHz VCC = 3.0 V to 5.25 V, -20°C ≤ Topr ≤ 85°C 36
High-speed on-chip oscillator frequency fOCO40M 38.4 40 41.6 MHz VCC = 3.0 V to 5.5 V, -40°C ≤ Topr ≤ 85°C 36
Low-speed on-chip oscillator frequency fOCO-S 40 125 250 kHz 36
Oscillation stability time (on-chip oscillator) 10 100 µs 36
Time for internal power supply stabilization during power-on td(P-R) 1 2000 µs 36
STOP exit time td(R-S) 150 µs 36
Output H voltage (IOL row) max L voltage VOL 2 V VCC = 5 V, IOL = 5 mA (except XOUT) 42
Output L voltage VOL 0.45 V VCC = 5 V, IOL = 200 µA (except XOUT) 42
Input H current IIH 5 µA VI = 5 V, Vcc = 5 V 42
Input L current IIL -5 µA VI = 0 V, Vcc = 5 V 42
Pull-up resistance RPULLUP 30 50 167 kΩ VI = 0 V, Vcc = 5 V 42
Power supply current, high-clock mode ICC 12.5 25 mA VCC 3.3-5.5 V; XIN = 20 MHz (square wave), high-speed on-chip oscillator off, low-speed on-chip oscillator on = 125 kHz, no division 43
Power supply current, high-clock mode ICC 10 20 mA VCC 3.3-5.5 V; XIN = 16 MHz (square wave), high-speed on-chip oscillator off, low-speed on-chip oscillator on = 125 kHz, no division 43
Input cycle time XIN tc(XIN) 50 ns Topr = 25°C, VCC = 5 V 44
XIN input H width tWH(XIN) 25 ns Topr = 25°C, VCC = 5 V 44
XIN input L width tWL(XIN) 25 ns Topr = 25°C, VCC = 5 V 44
Hysteresis (INT0, INT1, INT2, INT3, KI0-KI3, TRAIO, RXD0, RXD1, CLK0, SSI, SCL, SDA, SSO) VT+-VT- 0.1 0.5 V VCC = 5 V 42
Output H voltage / Pull-up current limits (3 V) IIH IIH 4 µA VI = 3 V, Vcc = 3 V 46
Input L current 3 V IIL -4 µA VI = 0 V, Vcc = 3 V 46
Power supply current, high-clock mode 3 V ICC 11.5 23 mA VCC 2.7-3.3 V; XIN = 20 MHz (square wave), high-speed on-chip oscillator off, low-speed on-chip oscillator on = 125 kHz, no division 47
Input cycle time XIN 3 V tc(XIN) 100 ns Topr = 25°C, VCC = 3 V 48

CAD (KiCad official)

  • Symbol: R5F2123CJFP#U0
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: r5f2123cjfp-u0-etched.step / r5f2123cjfp-u0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r5f2123cjfp-u0.step / r5f2123cjfp-u0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (54 pp, sha256 b79f4d256615f067, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF