Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

R5F2123AKFP#U0

RENESAS · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)

R5F2123AKFP#U0 from RENESAS, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P3_5/SCL/SSCK bidirectional CMOS I/O port P3_5 with alternate functions SCL (I2C clock I/O) and SSCK (clock synchronous serial clock I/O).
2 P3_3/SSI bidirectional CMOS I/O port P3_3 with alternate function SSI, the clock synchronous serial I/O data pin.
3 P3_4/SDA/SCS bidirectional CMOS I/O port P3_4 with alternate functions SDA (I2C data I/O) and SCS (chip-select I/O).
4 MODE input Connect this pin to VCC via a resistor.
5 P4_3 bidirectional CMOS I/O port P4_3 with per-pin direction register and program-selectable pull-up when used as input.
6 P4_4 bidirectional CMOS I/O port P4_4 with per-pin direction register and program-selectable pull-up when used as input.
7 RESET input An input of L on this pin resets the MCU.
8 P4_7/XOUT input Input-only port P4_7; the XOUT pin is the XIN clock output, connected to a ceramic resonator or crystal oscillator with XIN.
9 VSS/AVSS power_in Apply 0 V to the VSS pin; AVSS is the analog ground for the A/D converter, with a capacitor connected between AVCC and AVSS.
10 P4_6/XIN input Input-only port P4_6; the XIN pin is the clock input for the ceramic resonator or crystal oscillator, or an externally derived clock may be input here.
11 VCC/AVCC power_in Apply 2.7 V to 5.5 V to the VCC pin; AVCC supplies the A/D converter.
12 P2_7/TRDIOD1 bidirectional CMOS I/O port P2_7 with alternate function TRDIOD1, the Timer RD I/O port.
13 P2_6/TRDIOC1 bidirectional CMOS I/O port P2_6 with alternate function TRDIOC1, the Timer RD I/O port.
14 P2_5/TRDIOB1 bidirectional CMOS I/O port P2_5 with alternate function TRDIOB1, the Timer RD I/O port.
15 P2_4/TRDIOA1 bidirectional CMOS I/O port P2_4 with alternate function TRDIOA1, the Timer RD I/O port.
16 P2_3/TRDIOD0 bidirectional CMOS I/O port P2_3 with alternate function TRDIOD0, the Timer RD I/O port.
17 P2_2/TRDIOC0 bidirectional CMOS I/O port P2_2 with alternate function TRDIOC0, the Timer RD I/O port.
18 P2_1/TRDIOB0 bidirectional CMOS I/O port P2_1 with alternate function TRDIOB0, the Timer RD I/O port.
19 P2_0/TRDIOA0/TRDCLK bidirectional CMOS I/O port P2_0 with alternate functions TRDIOA0 (Timer RD I/O) and TRDCLK (Timer RD external clock input).
20 P1_7/TRAIO/INT1 bidirectional CMOS I/O port P1_7 with alternate functions TRAIO (Timer RA I/O) and INT1 (interrupt input).
21 P1_6/CLK0 bidirectional CMOS I/O port P1_6 with alternate function CLK0, the serial transfer clock I/O pin.
22 P1_5/RXD0/(TRAIO)/(INT1) bidirectional CMOS I/O port P1_5 with alternate function RXD0 (serial data input); TRAIO and INT1 can be assigned to this pin by a program.
23 P1_4/TXD0 bidirectional CMOS I/O port P1_4 with alternate function TXD0, the serial data output pin.
24 P1_3/KI3/AN11 bidirectional CMOS I/O port P1_3 with alternate functions KI3 (key input interrupt) and AN11 (A/D analog input).
25 P4_5/INT0 bidirectional CMOS I/O port P4_5 with alternate function INT0, the interrupt input and Timer RD input pin.
26 P6_6/INT2/TXD1 bidirectional CMOS I/O port P6_6 with alternate functions INT2 (interrupt input) and TXD1 (serial data output).
27 P6_7/INT3/RXD1 bidirectional CMOS I/O port P6_7 with alternate functions INT3 (interrupt input) and RXD1 (serial data input).
28 P1_2/KI2/AN10 bidirectional CMOS I/O port P1_2 with alternate functions KI2 (key input interrupt) and AN10 (A/D analog input).
29 P1_1/KI1/AN9 bidirectional CMOS I/O port P1_1 with alternate functions KI1 (key input interrupt) and AN9 (A/D analog input).
30 P1_0/KI0/AN8 bidirectional CMOS I/O port P1_0 with alternate functions KI0 (key input interrupt) and AN8 (A/D analog input).
31 P3_1/TRBO bidirectional CMOS I/O port P3_1 with alternate function TRBO, the Timer RB output pin.
32 P3_0/TRAO bidirectional CMOS I/O port P3_0 with alternate function TRAO, the Timer RA output pin.
33 P6_5 bidirectional CMOS I/O port P6_5, direction set per bit with program-selectable pull-up when used as input.
34 P6_4 bidirectional CMOS I/O port P6_4, direction set per bit with program-selectable pull-up when used as input.
35 P6_3 bidirectional CMOS I/O port P6_3, direction set per bit with program-selectable pull-up when used as input.
36 P0_7/AN0 bidirectional CMOS I/O port P0_7 with alternate function AN0, an analog input to the A/D converter.
37 P0_6/AN1 bidirectional CMOS I/O port P0_6 with alternate function AN1, an analog input to the A/D converter.
38 P0_5/AN2 bidirectional CMOS I/O port P0_5 with alternate function AN2, an analog input to the A/D converter.
39 P0_4/AN3 bidirectional CMOS I/O port P0_4 with alternate function AN3, an analog input to the A/D converter.
40 P4_2/VREF input Input-only port P4_2; the VREF pin is the reference voltage input to the A/D converter.
41 P6_0/TREO bidirectional CMOS I/O port P6_0 with alternate function TREO, the Timer RE divided clock output pin.
42 P6_2/CRX0 bidirectional CMOS I/O port P6_2 with alternate function CRX0, the CAN data input pin.
43 P6_1/CTX0 bidirectional CMOS I/O port P6_1 with alternate function CTX0, the CAN data output pin.
44 P0_3/AN4 bidirectional CMOS I/O port P0_3 with alternate function AN4, an analog input to the A/D converter.
45 P0_2/AN5 bidirectional CMOS I/O port P0_2 with alternate function AN5, an analog input to the A/D converter.
46 P0_1/AN6 bidirectional CMOS I/O port P0_1 with alternate function AN6, an analog input to the A/D converter.
47 P0_0/AN7 bidirectional CMOS I/O port P0_0 with alternate function AN7, an analog input to the A/D converter.
48 P3_7/SSO bidirectional CMOS I/O port P3_7 with alternate function SSO, the clock synchronous serial I/O data pin.

Key specifications

Parameter Value
Manufacturer RENESAS
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC/AVCC -0.3 6.5 V 30
Input voltage VI -0.3 V upper limit printed as VCC+0.3 30
Power dissipation Pd 300 mW -40°C ≤ Topr ≤ 85°C 30
Power dissipation Pd 125 mW 85°C < Topr ≤ 125°C 30
Operating ambient temperature Topr -40 125 °C K version 30
Storage temperature Tstg -65 150 °C 30
Supply voltage VCC/AVCC 2.7 5.5 V 30
Peak sum output H current IOH(sum) -60 mA Sum of all pins IOH (peak) 30
Peak output H current IOH(peak) -10 mA 30
Average output H current IOH(avg) -5 mA 30
Peak sum output L currents IOL(sum) 60 mA Sum of all pins IOL (peak) 30
Peak output L currents IOL(peak) 10 mA 30
Average output L current IOL(avg) 5 mA 30
XIN clock input oscillation frequency f(XIN) 0 16 MHz 3.0 V ≤ VCC ≤ 5.5 V, -40°C ≤ Topr ≤ 125°C 30
XIN clock input oscillation frequency f(XIN) 0 10 MHz 2.7 V ≤ VCC < 3.0 V 30
Hysteresis VT+-VT- 0.1 0.5 V INT0, INT1, INT2, INT3, KI0, KI1, KI2, KI3, TRAIO, RXD0, RXD1, CLK0, SSI, SCL, SDA, SSO 42
Hysteresis VT+-VT- 0.1 1 V RESET 42
Input H current IIH 5 µA VI = 5 V, Vcc = 5 V 42
Input L current IIL -5 µA VI = 0 V, Vcc = 5 V 42
Pull-Up Resistance RPULLUP 30 50 167 kΩ VI = 0 V, Vcc = 5 V 42
RAM Hold Voltage VRAM 2 V During stop mode 42
Output L voltage VOL 2 V IOL = 5 mA, except XOUT 42
Output L voltage VOL 0.45 V IOL = 200 µA, except XOUT 42
Power supply current ICC 12.5 25 mA High-clock mode, XIN = 20 MHz (square wave), no division 43
Power supply current ICC 10 20 mA High-clock mode, XIN = 16 MHz (square wave), no division 43
Power supply current ICC 6.5 13 mA High-speed on-chip oscillator mode, fOCO = 10 MHz, no division 43
Power supply current ICC 150 300 µA Low-speed on-chip oscillator mode, FMR47 = 1 43
Power supply current ICC 60 120 µA Wait mode, peripheral clock operation, VCA20 = 0, VCA26 = VCA27 = 0 43
Power supply current ICC 38 76 µA Wait mode, peripheral clock off, VCA20 = 0, VCA26 = VCA27 = 0 43
Power supply current ICC 0.8 3 µA Stop mode, Topr = 25°C, CM10 = 1 43
XIN input cycle time tc(XIN) 50 ns VCC = 5 V 44
XIN input H width tWH(XIN) 25 ns VCC = 5 V 44
XIN input L width tWL(XIN) 25 ns VCC = 5 V 44
TRAIO input cycle time tc(TRAIO) 100 ns VCC = 5 V 44
TRAIO input H width tWH(TRAIO) 40 ns VCC = 5 V 44
TRAIO input L width tWL(TRAIO) 40 ns VCC = 5 V 44
High-speed on-chip oscillator frequency fOCO40M 38 40 42 MHz VCC = 3.0 V to 5.5 V, -40°C ≤ Topr ≤ 125°C 36
High-speed on-chip oscillator frequency fOCO40M 37.6 40 42.4 MHz VCC = 2.7 V to 5.5 V, -40°C ≤ Topr ≤ 125°C 36
Low-speed on-chip oscillator frequency fOCO-S 40 125 250 kHz 36
Time for internal power supply stabilization during power-on td(P-R) 1 2000 µs 36
STOP exit time td(R-S) 150 µs 36
Power-on reset valid voltage Vpor1 0.1 V 35
External power VCC rise gradient trth 20 mV/msec VCC ≤ 3.6 V 35
External power VCC rise gradient trth 20 2000 mV/msec VCC > 3.6 V 35
Voltage detection level Vdet1 2.7 2.85 3 V 34
Voltage detection level Vdet2 3.3 3.6 3.9 V 34
MCU operating voltage minimum value Vccmin 2.7 V 34
Absolute accuracy -3 3 LSB 10-bit mode, φAD = 10 MHz, Vref = AVCC = 5.0 V 31
Resistor ladder Rladder 10 40 kΩ Vref = AVCC 31
Program/erase endurance 1000 times R8C/23 Group 32
Byte program time 50 400 µs 32
Block erase time 0.4 9 s 32
Data hold time 20 year Ambient temperature = 55°C 32
Program/erase endurance 10000 times Data flash block A, block B 33
Byte program time 50 400 µs Program/erase endurance ≤ 1,000 times 33
Program, erase temperature -40 85 °C Note 8: 125°C for K version 33

CAD (KiCad official)

  • Symbol: R5F2123AKFP#U0
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: r5f2123akfp-u0-etched.step / r5f2123akfp-u0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r5f2123akfp-u0.step / r5f2123akfp-u0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (54 pp, sha256 b79f4d256615f067, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF