3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownR05CT05S-CT
RECOM POWER · Global Sourcing Parts · SOP-16-300mil
R05CT05S-CT from RECOM POWER, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CTRL | input | ON/OFF control input: DC-DC is ON at 2.2VDC to 5.5VDC and OFF at 0VDC to 0.8VDC, with an input current of 5µA to 10µA at 5VDC. |
| 2 | -VIN | power_in | Negative input supply connection; the absolute maximum rating from +VIN to -VIN is -0.3VDC to 6VDC. |
| 3 | +VIN | power_in | Positive input supply with a nominal 5VDC input range of 4.5VDC to 5.5VDC and under-voltage lockout turning the DC-DC on at 4.2VDC and off at 3.7VDC. |
| 4 | SYNC | input | Synchronous clock input; connect to -VIN for standalone operation on the internal oscillator, with an input current of 1µA maximum at 5VDC. |
| 5 | SYNC OK | output | Active-low open-drain diagnostic output that is asserted LOW when no valid external SYNC clock is detected, with an output voltage of 150mV maximum at -2mA. |
| 6 | NC | unconnected | No connection. |
| 7 | NC | unconnected | No connection. |
| 8 | NC | unconnected | No connection. |
| 9 | -VOUT | power_in | Negative output connection and reference for the output voltage setting; the absolute maximum rating from +VOUT to -VOUT is -0.3VDC to 6VDC. |
| 10 | NC | unconnected | No connection. |
| 11 | NC | unconnected | No connection. |
| 12 | NC | unconnected | No connection. |
| 13 | TRIM | input | Output voltage selection pin: shorted to +VOUT sets 5.0VDC and shorted to -VOUT sets 3.3VDC, as given in the output voltage table. |
| 14 | +VOUT | power_out | Regulated post-regulated output, user-selectable at 3.3VDC or 5VDC. |
| 15 | -VOUT | power_in | Negative output connection, the same net as pin 9. |
| 16 | -VOUT | power_in | Negative output connection, the same net as pin 9. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RECOM POWER |
| Package | SOP-16-300mil |
| Category | Global Sourcing Parts |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| +VIN to -VIN | -0.3 | 6 | VDC | Absolute Maximum Voltage | 1 | ||
| +VOUT to -VOUT | -0.3 | 6 | VDC | Absolute Maximum Voltage | 1 | ||
| CTRL, SYNC, SYNC_OK to -VIN | -0.3 | VDC | max +VIN + 0.3VDC | 1 | |||
| SEL to -VOUT | -0.3 | VDC | max VOUT + 0.3VDC | 1 | |||
| Operating IC Junction Temperature | TJ | -40 | 150 | °C | 1 | ||
| Operating Ambient Temperature | TAMB | -40 | 150 | °C | 1 | ||
| Storage Temperature | TSTO | -65 | 150 | °C | 1 | ||
| Input Voltage Range | 4.5 | 5 | 5.5 | VDC | nom. +VIN=5VDC | 2 | |
| Input Current Range | 0 | 200 | mA | 2 | |||
| ON/OFF CTRL DC-DC ON | 2.2 | 5.5 | VDC | DC-DC ON | 2 | ||
| ON/OFF CTRL DC-DC OFF | 0 | 0.8 | VDC | DC-DC OFF | 2 | ||
| Minimum Load | 0 | % | 2 | ||||
| Output Voltage Accuracy | VOUT | 4.7 | 5 | 5.3 | VDC | VOUT set to 5VDC; load= 0mA to 75mA, VIN= 4.5VDC | 3 |
| Output Voltage Accuracy | VOUT | 3.1 | 3.3 | 3.5 | VDC | VOUT set to 3.3VDC; load= 0mA to 110mA, VIN= 4.5VDC | 3 |
| SYNC OK Output Voltage | 150 | mV | I SYNC_OK= -2mA | 3 | |||
| Line Regulation | 1 | % | low line to high line | 3 | |||
| Load Regulation | 1.5 | % | 0% to 100% load | 3 | |||
| Common mode transient immunity | -100 | 100 | V/ns | 4 | |||
| External Creepage | 8 | mm | greater than 8 mm | 4 | |||
| Internal Clearance (solid insulation) | 0.12 | mm | greater than 0.12 mm | 4 | |||
| Distance through the insulation (minimum internal gap) | 120 | µm | greater than 120 µm | 4 | |||
| Comparative tracking index | 600 | V | DIN EN 60112 (VDE 0303-11); IEC 60112; greater than 600V | 4 | |||
| Operating Temperature Range with derating | TAMB | -40 | 140 | °C | natural convection 0.1m/s; refer to Thermal Derating with derating | 4 | |
| Operating Temperature Range without derating | TAMB | -40 | 55 | °C | without derating | 4 | |
| ESD human-body model (HBM) | -3 | 3 | kV | ANSI/ESDA/JEDEC JS-001 | 4 | ||
| ESD charged-device model (CDM) | -0.5 | 0.5 | kV | JEDEC JESD22-C101 | 4 | ||
| Operating Altitude | 5000 | m | 4 | ||||
| Operating Humidity | 95 | % RH | max. | 4 | |||
| Under Voltage Lockout (UVLO) DC-DC ON | 4.2 | VDC | DC-DC ON | 2 | |||
| Under Voltage Lockout (UVLO) DC-DC OFF | 3.7 | VDC | DC-DC OFF | 2 | |||
| Under Voltage Lockout Hysteresis | 0.5 | VDC | 2 | ||||
| Quiescent Current | IQ | 45 | mA | SEL pin shorted to VISO (VOUT= 5VDC) | 2 | ||
| Quiescent Current | IQ | 40 | mA | SEL pin with 100kW connected to VISO (VOUT= 5.4VDC) | 2 | ||
| Quiescent Current | IQ | 80 | mA | SEL pin shorted to -VOUT (VOUT= 3.3VDC) | 2 | ||
| Quiescent Current | IQ | 75 | mA | SEL pin with 100kW connected to -VIN (VOUT= 3.7VDC) | 2 | ||
| Start-up Time | 1.5 | ms | power up | 2 | |||
| Start-up Time | 1.2 | ms | using CTRL function | 2 | |||
| Rise time | 750 | µs | 2 | ||||
| Input Current of CTRL Pin | 5 | 10 | µA | CTRL voltage= 5VDC | 2 | ||
| Standby Current | 100 | µA | DC-DC OFF | 2 | |||
| Internal Operating Frequency | 7.2 | 8 | 8.8 | MHz | 2 | ||
| SYNC Pin Input Current | 0.02 | 1 | µA | SYNC Voltage= 5VDC | 3 | ||
| SYNC OK pin leakage current | 1 | µA | V SYNC_OK= 5VDC | 3 | |||
| Short Circuit Input Current | 215 | mA | VIN= 4.5VDC | 3 | |||
| Short Circuit Input Current | 240 | mA | VIN= 5VDC | 3 | |||
| Short Circuit Input Current | 260 | mA | VIN= 5.5VDC | 3 | |||
| Isolation Voltage | 5 | kVAC | 1 minute | 3 | |||
| Maximum repetitive peak isolation voltage | 1.414 | kV peak | 4 | ||||
| Maximum working isolation voltage | 1 | kVAC | 4 | ||||
| Maximum working isolation voltage | 1.414 | kVDC | 4 | ||||
| Maximum transient isolation voltage | 7.071 | kV peak | 1 minute | 4 | |||
| Maximum surge isolation voltage | 6.25 | kV peak | according IEC62368-1= 1.2/50us | 4 | |||
| Isolation Resistance | 1012 | W | VISO= 500VDC, 25°C; printed as 1012W typ. | 4 | |||
| Isolation Capacitance | 3.5 | pF | 4 | ||||
| Temperature Coefficient | 50 | ppm/K | 4 | ||||
| Thermal Impedance junction to TAMB | 63.8 | K/W | 4 | ||||
| Thermal Impedance junction to case (top) | 21.4 | K/W | 4 | ||||
| Thermal Impedance junction to case (bottom) | 37.2 | K/W | 4 | ||||
| Thermal Impedance junction to board | 38.5 | K/W | 4 | ||||
| MTBF | 2500 | x 106 hours | TR-332, 50% stress G.B. +55°C | 4 |
CAD (KiCad official)
- Symbol:
R05CT05S-CT - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files:
r05ct05s-ct-etched.step/r05ct05s-ct-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r05ct05s-ct.step/r05ct05s-ct.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RECOM POWER datasheet, copy hosted by LCSC (6 pp, sha256
c8d8621ee3c11f58, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).