main
Ray Publish 0.1.0 15e30d8
{
  "slug": "qpl9503tr7",
  "version": "0.1.0",
  "type": "component",
  "description": "Qorvo RF Amplifiers, DFN-8-EP(2x2). Pinout read twice from the datasheet and the two reads agreed, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "rf & radio",
    "qpl9503tr7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "qpl9503tr7.kicad_sym",
    "qpl9503tr7.kicad_mod",
    "qpl9503tr7.glb",
    "qpl9503tr7.step",
    "qpl9503tr7.lbr",
    "docs/hero.png",
    "docs/qpl9503tr7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "qpl9503tr7-hero.glb",
    "qpl9503tr7-hero.overlay.json"
  ],
  "component": {
    "mpn": "QPL9503TR7",
    "manufacturer": "Qorvo",
    "package": "DFN-8-EP(2x2)",
    "pin_count": 9,
    "category": "RF & Radio",
    "subcategory": "RF Amplifiers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/896d5220f75aff15f820640afd7ec9c5.pdf",
    "parts": {
      "symbol": "qpl9503tr7.kicad_sym",
      "footprint": "qpl9503tr7.kicad_mod",
      "model_3d": "qpl9503tr7-hero.glb",
      "model_3d_plain": "qpl9503tr7.glb",
      "model_3d_step": "qpl9503tr7-etched.step",
      "model_3d_step_plain": "qpl9503tr7.step",
      "lbr": "qpl9503tr7.lbr"
    },
    "distributor_links": {
      "lcsc": "C470924",
      "digikey": "2312-QPL9503TR7TR-ND",
      "mouser": "772-QPL9503T"
    },
    "distributor_check": {
      "checked_at": "2026-11-22T00:19:20Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2312-QPL9503TR7TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "772-QPL9503T",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Vbias",
        "type": "input",
        "description": "Sets the Icq bias point for the device through an external bias resistor."
      },
      {
        "number": "2",
        "name": "RF In",
        "type": "input",
        "description": "RF input pin that requires an external DC block."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No electrical connection; provide grounded land pads for PCB mounting integrity."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "RF/DC ground; use the recommended via pattern to minimize inductance and thermal resistance."
      },
      {
        "number": "5",
        "name": "Shut Down",
        "type": "input",
        "description": "A voltage above 1.17 V turns the device off, while ground or a voltage below 0.63 V keeps the LNA in the ON state."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "RF/DC ground; use the recommended via pattern to minimize inductance and thermal resistance."
      },
      {
        "number": "7",
        "name": "RF Out / DCBias",
        "type": "output",
        "description": "RF output pin; DC bias must also be injected through an RF bias choke/inductor for operation."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No electrical connection; provide grounded land pads for PCB mounting integrity."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet does not number the backside paddle. I assigned it pin 9 as a convention for the expos; The datasheet shows a single 8-pin 2x2 mm DFN package. The part number QPL9503TR7 is the 2500-piece ; Pin 1 Vbias is typed as input, but the datasheet describes it as a bias-setting resistor connection."
        ],
        "pages_sent": 7,
        "cost_usd": 0.0499,
        "at": "2026-11-22T00:19:12"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/896d5220f75aff15f820640afd7ec9c5.pdf",
        "pages": 7,
        "sha256": "d0a846a77c716e9b",
        "source_tier": "lcsc",
        "citation": "Qorvo datasheet, copy hosted by LCSC"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "qpl9503tr7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.92
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "914cd301aa2efff54a7c18fe40fe21c25b277d6109b6cb10afb266387128ddd0",
        "checked": "2026-11-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "qpl9503tr7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.92
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cb25a84e549b5ac22d53377ac851b5fb92e24f286aba47caf117b4dd165388fb",
        "checked": "2026-11-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}