main
Ray
Publish 0.1.0
15e30d8
QPL9503TR7
Qorvo · RF Amplifiers · DFN-8-EP(2x2)
QPL9503TR7 from Qorvo, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vbias | input | Sets the Icq bias point for the device through an external bias resistor. |
| 2 | RF In | input | RF input pin that requires an external DC block. |
| 3 | NC | unconnected | No electrical connection; provide grounded land pads for PCB mounting integrity. |
| 4 | GND | power_in | RF/DC ground; use the recommended via pattern to minimize inductance and thermal resistance. |
| 5 | Shut Down | input | A voltage above 1.17 V turns the device off, while ground or a voltage below 0.63 V keeps the LNA in the ON state. |
| 6 | GND | power_in | RF/DC ground; use the recommended via pattern to minimize inductance and thermal resistance. |
| 7 | RF Out / DCBias | output | RF output pin; DC bias must also be injected through an RF bias choke/inductor for operation. |
| 8 | NC | unconnected | No electrical connection; provide grounded land pads for PCB mounting integrity. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Qorvo |
| Package | DFN-8-EP(2x2) |
| Category | RF & Radio |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TSTORE | -65 | 150 | °C | 2 | ||
| Supply Voltage (VDD) | VDD | 7 | V | 2 | |||
| RF Input Power, CW, 50Ω, T=25°C | 30 | dBm | CW, 50Ω, T=25°C | 2 | |||
| RF Input Power, WCDMA, 10dB PAR | 27 | dBm | WCDMA, 10dB PAR | 2 | |||
| RF Input Power, CW, OFF State | 30 | dBm | CW, OFF State | 2 | |||
| Supply Voltage (VDD) | VDD | 3.3 | 5 | 5.25 | V | 2 | |
| TCASE | TCASE | -40 | 105 | °C | 2 | ||
| Tj for >10^6 hours MTTF | Tj | 190 | °C | for >10^6 hours MTTF | 2 | ||
| Operational Frequency Range | 600 | 6000 | MHz | 2 | |||
| Gain | 18.5 | 21.6 | 22.5 | dB | 2 | ||
| Input Return Loss | 10 | dB | 2 | ||||
| Output Return Loss | 9 | dB | 2 | ||||
| Noise Figure | NF | 0.9 | 1.3 | dB | Note 1: input trace loss de-embedded | 2 | |
| Output P1dB | P1dB | 19 | dBm | 2 | |||
| Output IP3 | OIP3 | 30 | 35.5 | dBm | Pout=+5 dBm/tone, Δf=1 MHz | 2 | |
| Shut Down control voltage, On state | VPD | 0 | 0.63 | V | On state, pin 5 | 2 | |
| Shut Down control voltage, Off state (Power down) | VPD | 1.17 | V | Off state (Power down), pin 5; upper limit printed as VDD | 2 | ||
| Current, IDD On state | IDD | 35 | 56 | 90 | mA | On state | 2 |
| Current, IDD Off state (Power down) | IDD | 3 | mA | Off state (Power down) | 2 | ||
| Shutdown pin current | ISD | 140 | µA | VPD ≥ 1.17 V | 2 | ||
| Switching Speed LNA ON to OFF | 20 | ns | LNA ON to OFF | 2 | |||
| Switching Speed LNA OFF to ON | 400 | ns | LNA OFF to ON | 2 | |||
| Thermal Resistance, θjc | θjc | 48 | °C/W | channel to case | 2 |
CAD (KiCad official)
- Symbol:
QPL9503TR7 - Footprint:
Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm - 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
qpl9503tr7-etched.step/qpl9503tr7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);qpl9503tr7.step/qpl9503tr7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Qorvo datasheet, copy hosted by LCSC (7 pp, sha256
d0a846a77c716e9b, retrieved 2026-11-22) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# QPL9503TR7
**Qorvo** · RF Amplifiers · DFN-8-EP(2x2)
QPL9503TR7 from Qorvo, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vbias | input | Sets the Icq bias point for the device through an external bias resistor. |
| 2 | RF In | input | RF input pin that requires an external DC block. |
| 3 | NC | unconnected | No electrical connection; provide grounded land pads for PCB mounting integrity. |
| 4 | GND | power_in | RF/DC ground; use the recommended via pattern to minimize inductance and thermal resistance. |
| 5 | Shut Down | input | A voltage above 1.17 V turns the device off, while ground or a voltage below 0.63 V keeps the LNA in the ON state. |
| 6 | GND | power_in | RF/DC ground; use the recommended via pattern to minimize inductance and thermal resistance. |
| 7 | RF Out / DCBias | output | RF output pin; DC bias must also be injected through an RF bias choke/inductor for operation. |
| 8 | NC | unconnected | No electrical connection; provide grounded land pads for PCB mounting integrity. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Qorvo |
| Package | DFN-8-EP(2x2) |
| Category | RF & Radio |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TSTORE | -65 | | 150 | °C | | 2 |
| Supply Voltage (VDD) | VDD | | | 7 | V | | 2 |
| RF Input Power, CW, 50Ω, T=25°C | | | | 30 | dBm | CW, 50Ω, T=25°C | 2 |
| RF Input Power, WCDMA, 10dB PAR | | | | 27 | dBm | WCDMA, 10dB PAR | 2 |
| RF Input Power, CW, OFF State | | | | 30 | dBm | CW, OFF State | 2 |
| Supply Voltage (VDD) | VDD | 3.3 | 5 | 5.25 | V | | 2 |
| TCASE | TCASE | -40 | | 105 | °C | | 2 |
| Tj for >10^6 hours MTTF | Tj | | | 190 | °C | for >10^6 hours MTTF | 2 |
| Operational Frequency Range | | 600 | | 6000 | MHz | | 2 |
| Gain | | 18.5 | 21.6 | 22.5 | dB | | 2 |
| Input Return Loss | | 10 | | | dB | | 2 |
| Output Return Loss | | 9 | | | dB | | 2 |
| Noise Figure | NF | 0.9 | | 1.3 | dB | Note 1: input trace loss de-embedded | 2 |
| Output P1dB | P1dB | 19 | | | dBm | | 2 |
| Output IP3 | OIP3 | 30 | 35.5 | | dBm | Pout=+5 dBm/tone, Δf=1 MHz | 2 |
| Shut Down control voltage, On state | VPD | 0 | | 0.63 | V | On state, pin 5 | 2 |
| Shut Down control voltage, Off state (Power down) | VPD | 1.17 | | | V | Off state (Power down), pin 5; upper limit printed as VDD | 2 |
| Current, IDD On state | IDD | 35 | 56 | 90 | mA | On state | 2 |
| Current, IDD Off state (Power down) | IDD | | | 3 | mA | Off state (Power down) | 2 |
| Shutdown pin current | ISD | | | 140 | µA | VPD ≥ 1.17 V | 2 |
| Switching Speed LNA ON to OFF | | | | 20 | ns | LNA ON to OFF | 2 |
| Switching Speed LNA OFF to ON | | | | 400 | ns | LNA OFF to ON | 2 |
| Thermal Resistance, θjc | θjc | | 48 | | °C/W | channel to case | 2 |
## CAD (KiCad official)
- Symbol: `QPL9503TR7`
- Footprint: `Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm`
- 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files: `qpl9503tr7-etched.step` / `qpl9503tr7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `qpl9503tr7.step` / `qpl9503tr7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Qorvo datasheet, copy hosted by LCSC](docs/qpl9503tr7-datasheet.pdf) (7 pp, sha256 `d0a846a77c716e9b`, retrieved 2026-11-22)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/qpl9503tr7-datasheet.pdf)