component
PY32F030K28T6
Public Made by Adomby adom
PUYA Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPY32F030K28T6
PUYA · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)
PY32F030K28T6 from PUYA, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Digital power supply pin; the datasheet gives a standard operating voltage of 1.7 V to 5.5 V. |
| 2 | PF0-OSC_IN | bidirectional | COM-type I/O (PF0) that also serves as the HSE oscillator input OSC_IN; alternate functions include SPI2_SCK, USART2_RX, TIM14_CH1, USART1_RX, USART2_TX and I2C_SDA. |
| 3 | PF1-OSC_OUT | bidirectional | COM-type I/O (PF1) that also serves as the HSE oscillator output OSC_OUT; alternate functions include SPI2_MISO, USART2_TX, USART1_TX, USART2_RX and I2C_SCL. |
| 4 | PF2-NRST | bidirectional | RST-type reset port that functions as the NRST input, with an internal weak pull-up of 30 to 70 kΩ (typical 50 kΩ) and no analog I/O capability. |
| 5 | PF3 | bidirectional | COM-type I/O (PF3); alternate functions include USART1_TX, COMP2_INP, USART2_TX, SPI2_MISO, SPI1_NSS, TIM3_CH3 and RTC_OUT. |
| 6 | PA0 | bidirectional | COM-type I/O with analog capability; alternate functions include SPI2_SCK, ADC_IN0, COMP1_INM, USART1_CTS, TIM1_CH3 and COMP1_OUT. |
| 7 | PA1 | bidirectional | COM-type I/O with analog capability; alternate functions include SPI1_SCK, COMP1_INP, ADC_IN1, USART1_RTS, USART2_RTS and LED_DATA_C. |
| 8 | PA2 | bidirectional | COM-type I/O with analog capability; alternate functions include SPI1_MOSI, COMP2_INM, ADC_IN2, USART1_TX, USART2_TX and LED_DATA_D. |
| 9 | PA3 | bidirectional | COM-type I/O with analog capability; alternate functions include SPI2_MISO, COMP2_INP, ADC_IN3, USART1_RX, USART2_RX and LED_DATA_E. |
| 10 | PA4 | bidirectional | COM-type I/O with analog capability; alternate functions include SPI1_NSS, ADC_IN4, USART1_CK, SPI2_MOSI, LED_DATA_F and TIM14_CH1. |
| 11 | PA5 | bidirectional | COM-type I/O with analog capability; alternate functions include SPI1_SCK, ADC_IN5, LED_DATA_G, LPTIM_ETR, TIM3_CH2 and USART2_RX. |
| 12 | PA6 | bidirectional | COM-type I/O with analog capability; alternate functions include SPI1_MISO, ADC_IN6, TIM3_CH1, TIM1_BKIN, LED_DATA_DP and TIM16_CH1. |
| 13 | PA7 | bidirectional | COM-type I/O (PA7) per the Pinout 2 figure; its alternate-function list is on pages 23-24, which are not in the provided text. |
| 14 | PB0 | bidirectional | COM-type I/O (PB0) per the Pinout 2 figure; its alternate-function list is on pages 23-24, which are not in the provided text. |
| 15 | PB1 | bidirectional | COM-type I/O (PB1) per the Pinout 2 figure; its alternate-function list is on pages 23-24, which are not in the provided text. |
| 16 | VSS | power_in | Ground pin, shown at this position in the Pinout figure; the pin table does not confirm it for this variant. |
| 17 | PB2 | bidirectional | COM-type I/O (PB2) per the Pinout 2 figure and QFN32 Pinout2; its alternate-function list is not in the provided text. |
| 18 | PA8 | bidirectional | COM-type I/O (PA8) per the Pinout 2 figure; its alternate-function list is not in the provided text. |
| 19 | PA9-OSC32OUT | bidirectional | COM-type I/O (PA9) that the pinout labels as the LSE oscillator output OSC32_OUT; its alternate-function list is not in the provided text. |
| 20 | PA10-OSC32IN | bidirectional | COM-type I/O (PA10) that the pinout labels as the LSE oscillator input OSC32_IN; its alternate-function list is not in the provided text. |
| 21 | PA11 | bidirectional | COM-type I/O (PA11) per the Pinout 2 figure; its alternate-function list is not in the provided text. |
| 22 | PA12 | bidirectional | COM-type I/O (PA12) per the Pinout 2 figure; its alternate-function list is not in the provided text. |
| 23 | PA13 | bidirectional | COM-type I/O (PA13) per the Pinout 2 figure; its alternate-function list is not in the provided text. |
| 24 | PA14 | bidirectional | COM-type I/O (PA14) per the Pinout 2 figure; its alternate-function list is not in the provided text. |
| 25 | PA15 | bidirectional | COM-type I/O (PA15); only the tail of its alternate-function list (USART1_RX, USART2_RX, LED_COM0, EVENTOUT) is printed in the provided text. |
| 26 | PB3 | bidirectional | COM_L LED-type I/O whose sink current is software-selectable at 80/60/40/20 mA; alternate functions include SPI1_SCK, COMP2_INM, TIM1_CH2, USART1_RTS, USART2_RTS, LED_COM1 and EVENTOUT. |
| 27 | PB4 | bidirectional | COM_L LED-type I/O whose sink current is software-selectable at 80/60/40/20 mA; alternate functions include SPI1_MISO, COMP2_INP, TIM3_CH1, USART2_CTS, USART1_CTS, TIM17_BKIN, LED_COM2 and EVENTOUT. |
| 28 | PB5 | bidirectional | COM_L LED-type I/O whose sink current is software-selectable at 80/60/40/20 mA; alternate functions include SPI1_MOSI, TIM3_CH2, TIM16_BKIN, USART2_CK, USART1_CK, LPTIM_IN1, LED_COM3 and COMP1_OUT. |
| 29 | PB6 | bidirectional | COM-type I/O; alternate functions include USART1_TX, COMP2_INP, TIM1_CH3, TIM16_CH1N, USART2_TX, SPI2_MISO, I2C_SCL, LPTIM_ETR and EVENTOUT. |
| 30 | PB7 | bidirectional | COM-type I/O; alternate functions include USART1_RX, COMP2_INM, PVD_IN (PVD input), SPI2_MOSI, TIM17_CH1N, USART2_RX, I2C_SDA and EVENTOUT. |
| 31 | PF4-BOOT0 | bidirectional | COM-type I/O (PF4) that also serves as the BOOT0 boot-mode selection pin. |
| 32 | PB8 | bidirectional | COM-type I/O on the K2 variant; alternate functions include SPI2_SCK, COMP1_INP, TIM16_CH1, I2C1_SCL, USART2_TX and EVENTOUT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PUYA |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
CAD (KiCad official)
- Symbol:
PY32F030K28T6 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
py32f030k28t6-etched.step/py32f030k28t6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);py32f030k28t6.step/py32f030k28t6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PUYA datasheet (59 pp, sha256
38262b8a2c832056, retrieved 2026-10-09, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).