component
PY32F002BW15S6TU
Public Made by Adomby adom
PUYA Microcontrollers (MCU/MPU/SOC), SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPY32F002BW15S6TU
PUYA · Microcontrollers (MCU/MPU/SOC) · SOP-16
PY32F002BW15S6TU from PUYA, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Digital power supply, operating range 1.7 V to 5.5 V (VCC is the main supply pin and also feeds VCCA and VCCIO). |
| 2 | PB4 | bidirectional | Standard COM I/O on a normal 5 V port that supports analog input/output; listed functions are USART_TX, I2C_SDA and TIM1_BKIN. |
| 3 | PB3 | bidirectional | Standard COM I/O on a normal 5 V port that supports analog input/output; listed functions are USART_CK, I2C_SCL, TIM1_ETR and CMP1_OUT. |
| 4 | PB2 | bidirectional | Standard COM I/O on a normal 5 V port that supports analog input/output; listed functions are SPI_SCK, USART_CTS, TIM1_CH1N and TIM1_CH3. |
| 5 | PB1 | bidirectional | Standard COM I/O on a normal 5 V port that supports analog input/output; listed functions are USART_RTS, ADC_IN0, TIM1_CH2N, CMP1_INP, TIM1_CH4, CMP1_INM and MCO. |
| 6 | PB0 | bidirectional | Standard COM I/O on a normal 5 V port that supports analog input/output; listed functions are SPI_SCK, ADC_IN7, USART_CK, CMP1_INM, TIM1_CH2 and TIM1_CH3N. |
| 7 | PA0 | bidirectional | Standard COM I/O on a normal 5 V port that supports analog input/output; listed functions are SPI_MOSI and TIM1_CH1. |
| 8 | PA1 | bidirectional | Standard COM I/O on a normal 5 V port that supports analog input/output; listed functions are SPI_MISO and TIM1_CH2. |
| 9 | PA4 | bidirectional | Standard COM I/O on a normal 5 V port that supports analog input/output; listed functions are USART_RX, ADC_IN2, TIM1_CH3, CMP2_INM and TIM14_CH1. |
| 10 | PB6(SWDIO) | bidirectional | Standard COM I/O on a normal 5 V port; listed functions are SPI_MISO, ADC_IN6, USART_TX, I2C_SDA and SWDIO (serial wire debug data). |
| 11 | PA2(SWCLK) | bidirectional | Standard COM I/O on a normal 5 V port; listed functions are USART_RX, I2C_SCL, SWCLK (serial wire debug clock), TIM1_CH4 and CMP2_OUT. |
| 12 | PA6 | bidirectional | Standard COM I/O on a normal 5 V port that supports analog input/output; listed functions are SPI_NSS, ADC_IN3, USART_TX, External_clock_in and EVENTOUT. |
| 13 | PA7/PC0-NRST | bidirectional | Pin 13 is listed for both PA7 (SPI_MOSI, ADC_IN4, USART_TX, USART_RX, TIM1_CH4, MCO) and PC0-NRST, a reset-capable RST port with internal weak pull-up that does not support analog I/O, with NRST, SWDIO, TIM1_CH1N, ADC_IN5 and EVENTOUT listed; see review_required. |
| 14 | PC1 | bidirectional | Standard COM I/O on a normal 5 V port that supports analog input/output; listed functions are SPI_MISO and OSCIN (LSE oscillator input). |
| 15 | PB7 | bidirectional | Standard COM I/O on a normal 5 V port that supports analog input/output; listed functions are SPI_MOSI, OSCOUT (LSE oscillator output) and TIM14_CH1. |
| 16 | VSS | power_in | Ground pin; VSS is the reference for all voltages and must be connected to the supply system. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PUYA |
| Package | SOP-16 |
| Category | Embedded Processors & Controllers |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC (external main supply) | VCC | -0.3 | 6.25 | V | 29 | ||
| Input voltage on other pins | VIN | -0.3 | V | 29 | |||
| Total current into VCC pin (supply current) | IVCC | 80 | mA | 29 | |||
| Total current out of VSS pin (sink current) | IVSS | 80 | mA | 29 | |||
| Output sink current, all I/O | IIO(PIN) | 20 | mA | 29 | |||
| Output source current, all I/O | IIO(PIN) | -20 | mA | 29 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 30 | ||
| Operating temperature range | TO | -40 | 85 | °C | 30 | ||
| Power consumption | IDD | 300 | uA | @1MSPS | 38 | ||
| Internal sampling and hold capacitance | CIN | 5 | pF | 38 | |||
| ADC conversion clock frequency | FADC | 1 | 4 | 8 | MHz | VCC = 1.7V ~ 2.0V | 38 |
| ADC conversion clock frequency | FADC | 1 | 8 | 16 | MHz | VCC = 2.0V ~ 5.5V | 38 |
| ADC sampling time | Tsamp | 0.438 | 29.94 | μs | FADC=8MHz, VCC = 1.7V ~ 2.0V | 38 | |
| ADC sampling time | Tsamp | 3.5 | 239.5 | 1/FADC | FADC=8MHz, VCC = 1.7V ~ 2.0V | 38 | |
| ADC sampling time | Tsamp | 0.219 | 14.97 | μs | FADC=16MHz, VCC = 2.0V ~ 5.5V | 38 | |
| ADC differential nonlinearity | DNL | -2 | 2 | LSB | 38 | ||
| ADC integral nonlinearity | INL | -3 | 3 | LSB | 38 | ||
| ADC offset error | Offset | -2 | 2 | LSB | 38 | ||
| Comparator input voltage range | VIN | 0 | V | 38 | |||
| Comparator startup time to reach propagation delay specification | tSTART | 5 | μs | 38 | |||
| Comparator propagation delay, low to high | tD | 200 | ns | Output low to high | 38 | ||
| Comparator propagation delay, high to low | tD | 150 | ns | Output high to low | 38 | ||
| Comparator offset error | Voffset | -5 | 5 | mV | 38 | ||
| Comparator consumption current | IDD | 70 | μA | 38 | |||
| VTS linearity with temperature | TL | -2 | 2 | °C | 38 | ||
| Temperature sensor average slope | Avg_Slope | 2.3 | 2.5 | 2.7 | mV/°C | 38 | |
| Temperature sensor voltage at 30°C | V30 | 0.74 | 0.76 | 0.78 | V | 30°C (±5°C) | 38 |
| Temperature sensor start-up time entering continuous mode | tSTART | 70 | 120 | μs | entering continuous mode | 38 | |
| ADC sampling time when reading the temperature | tS_temp | 9 | μs | 38 | |||
| Internal reference voltage | VREFINT | 1.17 | 1.2 | 1.23 | V | 39 | |
| Start time of internal reference voltage | Tstart_vrefint | 10 | 15 | μs | 39 | ||
| Internal reference voltage temperature coefficient | Tcoeff | 100 | ppm/°C | 39 | |||
| Current consumption from VCC (internal reference) | Ivcc | 12 | 20 | μA | 39 | ||
| ADC internal 1.5V reference voltage | VREF15 | 1.485 | 1.5 | 1.515 | V | TA = 25°C, VCC = 3.3V | 39 |
| ADC internal 1.5V reference temperature coefficient | Tcoeff | 120 | ppm/°C | TA = -40°C ~ 85°C | 39 | ||
| Start time of internal reference voltage (VREFBUF) | Tstart_VREFBUF | 10 | 15 | μs | 39 | ||
| COMP internal reference (4bit DAC) absolute variation | ΔVabs | -0.5 | 0.5 | LSB | 39 | ||
| Start time of internal reference voltage (COMP) | Tstart_VREFCMP | 10 | 15 | μs | 39 | ||
| Timer resolution time | tres(TIM) | 1 | tTIMxCLK | 39 | |||
| Timer resolution time | tres(TIM) | 41.667 | ns | fTIMxCLK = 24MHz | 39 | ||
| Timer external clock frequency on CH1 to CH4 | fEXT | 12 | MHz | fTIMxCLK = 24MHz | 40 | ||
| Timer resolution (TIM1/14) | ResTIM | 16 | bit | TIM1/14 | 40 | ||
| 16-bit counter clock period | tCOUNTER | 1 | 65536 | tTIMxCLK | 40 | ||
| 16-bit counter clock period | tCOUNTER | 0.041667 | 2730 | μs | fTIMxCLK = 24MHz | 40 | |
| LPTIM overflow time, prescaler /1 | 0.0305 | 1998.85 | ms | Clock LSI, PRESC[2:0] = 0 | 40 | ||
| LPTIM overflow time, prescaler /2 | 0.061 | 3997.7 | ms | Clock LSI, PRESC[2:0] = 1 | 40 | ||
| LPTIM overflow time, prescaler /4 | 0.1221 | 8001.95 | ms | Clock LSI, PRESC[2:0] = 2 | 40 | ||
| LPTIM overflow time, prescaler /8 | 0.2441 | 15997.3 | ms | Clock LSI, PRESC[2:0] = 3 | 40 | ||
| LPTIM overflow time, prescaler /16 | 0.4883 | 32001.2 | ms | Clock LSI, PRESC[2:0] = 4 | 40 | ||
| LPTIM overflow time, prescaler /32 | 0.9766 | 64002.5 | ms | Clock LSI, PRESC[2:0] = 5 | 40 | ||
| LPTIM overflow time, prescaler /64 | 1.9531 | 127998 | ms | Clock LSI, PRESC[2:0] = 6 | 40 | ||
| LPTIM overflow time, prescaler /128 | 3.9063 | 256003 | ms | Clock LSI, PRESC[2:0] = 7 | 40 | ||
| I2C minimum I2CCLK frequency | fI2CCLK(min) | 2 | MHz | Standard-mode | 40 | ||
| I2C minimum I2CCLK frequency | fI2CCLK(min) | 9 | MHz | Fast-mode | 40 |
CAD (KiCad official)
- Symbol:
PY32F002BW15S6TU - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
py32f002bw15s6tu-etched.step/py32f002bw15s6tu-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);py32f002bw15s6tu.step/py32f002bw15s6tu.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PUYA datasheet (50 pp, sha256
fbb3d3b7645a5643, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).