PTH03060WAH

{
  "schema_version": 1,
  "type": "component",
  "slug": "pth03060wah",
  "title": "PTH03060WAH",
  "brief": "Texas Instruments DC-DC Power Modules, DIP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power modules",
    "pth03060wah",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "PTH03060WAH",
    "manufacturer": "Texas Instruments",
    "package": "DIP-10",
    "pin_count": 10,
    "category": "Power Modules",
    "subcategory": "DC-DC Power Modules",
    "datasheet": "https://www.ti.com/cn/lit/gpn/pth03060w",
    "parts": {
      "symbol": "pth03060wah.kicad_sym",
      "footprint": "pth03060wah.kicad_mod",
      "model_3d": "pth03060wah-hero.glb",
      "model_3d_plain": "pth03060wah.glb",
      "model_3d_step": "pth03060wah-etched.step",
      "model_3d_step_plain": "pth03060wah.step",
      "lbr": "pth03060wah.lbr"
    },
    "distributor_links": {
      "lcsc": "C2863411",
      "digikey": "2156-PTH03060WAH-ND",
      "mouser": "595-PTH03060WAH"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T17:10:02Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2156-PTH03060WAH-ND",
        "status": "found",
        "lifecycle": "Last Time Buy"
      },
      "mouser": {
        "pn": "595-PTH03060WAH",
        "status": "found",
        "lifecycle": "End of Life"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Common ground connection for the Vin and Vout power connections and the 0 VDC reference for the control inputs; GND pins 1 and 7 are internally common."
      },
      {
        "number": "2",
        "name": "Vin",
        "type": "power_in",
        "description": "Positive input voltage to the module, referenced to common GND; the input voltage range is 2.95 V minimum to 3.65 V maximum over the Io range."
      },
      {
        "number": "3",
        "name": "Inhibit",
        "type": "input",
        "description": "Open-collector/open-drain negative-logic input referenced to GND; a ground signal disables the output, VIL is 0.6 V maximum, and leaving it open lets the module run whenever a valid input is applied (internal pull-up to Vin)."
      },
      {
        "number": "4",
        "name": "Vo Adjust",
        "type": "passive",
        "description": "A 0.1 W, 1 % resistor (100 ppm/°C or better) must connect directly between this pin and GND pin 7 to set Vout above 0.8 V, with a set-point range of 0.8 V to 3.6 V; open circuit defaults the output to its lowest value."
      },
      {
        "number": "5",
        "name": "Vo Sense",
        "type": "input",
        "description": "Remote sense input that compensates for voltage drop between the module and load; it should be connected to Vout for optimal accuracy, may be left disconnected, and the measured IR drop should be limited to a maximum of 0.3 V."
      },
      {
        "number": "6",
        "name": "Vout",
        "type": "power_out",
        "description": "Regulated positive power output with respect to GND, adjustable from 0.8 V to 2.5 V with the Vo Adjust resistor and rated for up to 10 A."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Second common ground connection for the Vin and Vout power connections and the 0 VDC reference for the control inputs; it is also the ground reference for the Vo Adjust resistor."
      },
      {
        "number": "8",
        "name": "Track",
        "type": "input",
        "description": "Analog input that lets Vout follow an external voltage volt-for-volt from 0 V up to the set-point, with a Track input voltage range of -0.3 V to Vin + 0.3 V and a maximum input current of -130 µA; connect to Vin if unused."
      },
      {
        "number": "9",
        "name": "Margin Down",
        "type": "input",
        "description": "Negative-logic open-drain input that decreases Vout by 5 % from nominal when asserted to GND; it is not TTL compatible, sources about 8 µA when grounded, and may be left unconnected if unused."
      },
      {
        "number": "10",
        "name": "Margin Up",
        "type": "input",
        "description": "Negative-logic open-drain input that increases Vout by 5 % when asserted to GND; it is not TTL compatible, sources about 8 µA when grounded, and may be left unconnected if unused."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The package hint is DIP-10, but the datasheet and the package addendum list PTH03060WAH as a 10-pin ; The Vo Adjust pin type was set to passive because it is a resistor-set node; the datasheet does not ; Pin descriptions are taken from pages 2-3 of the provided text; pages 4-9 were not included in the e"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0594,
        "at": "2026-10-11T17:09:47"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/pth03060w",
        "pages": 19,
        "sha256": "ca51600cb5a2ec30",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pth03060wah.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.62,
          12.7,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.127,
        "footprint_binding": "identity",
        "sha256": "d55cf1368e362bcb87f165c0a42ca34c9cdc0e591dae011d929545c8f6b7e91f",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pth03060wah-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.62,
          12.7,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.127,
        "footprint_binding": "identity",
        "sha256": "0025d3706d52382543678828869c91e6b393c9a317be22c4edb6f74de9ca384c",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "DIP-10",
      "Category": "Power Modules",
      "Pins": "10"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "pth03060wah"
  ],
  "discovery_pitch": "PTH03060WAH (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pth03060wah.kicad_sym",
    "pth03060wah.kicad_mod",
    "pth03060wah.glb",
    "pth03060wah.step",
    "pth03060wah.lbr",
    "docs/hero.png",
    "docs/pth03060wah-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pth03060wah-hero.glb",
    "pth03060wah-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}