main
Ray
Publish 0.1.0
afbcf87
PT8A2648WEX
Diodes Incorporated · Biometric Sensors · SOIC-16
PT8A2648WEX from Diodes Incorporated, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the device. |
| 2 | RELAY | output | RELAY drive output through an external NPN transistor, active high. |
| 3 | OSCD | bidirectional | Output timing oscillator I/O connected to an external RC to adjust output duration; TD = 23552/FOSCD. |
| 4 | OSCS | bidirectional | System oscillator I/O connected to an external RC to set the system frequency, which is 16KHz for normal application. |
| 5 | ZC | input | Schmitt input for AC zero crossing detection. |
| 6 | CDS | input | Connected to a CDS voltage divider for day/night detection; a low input disables the PIR input, and it is a Schmitt trigger input with 5-second debounce time. |
| 7 | MODE | tri_state | Tri-state operating mode selection input: VCC keeps the output always ON, GND keeps it always OFF, and open selects AUTO mode. |
| 8 | Vcc | power_in | Positive power supply with an operating voltage of 4.75 V to 6.0 V (5.0 V typical). |
| 9 | VEE | power_out | Regulated voltage output of about 3.6 V (3.24 V to 3.96 V) with respect to GND. |
| 10 | COMPO | output | Output of the comparator, active high; the active output width is inversely proportional to the system frequency. |
| 11 | OP1P | input | Noninverting input of OP1. |
| 12 | OP1N | input | Inverting input of OP1. |
| 13 | OP1O | output | Output of OP1. |
| 14 | OP2P | input | Noninverting input of OP2, with an internal 1.8 V default. |
| 15 | OP2N | input | Inverting input of OP2. |
| 16 | OP2O | output | Output of OP2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOIC-16 |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VCC | 4.75 | 5 | 6 | V | 4 | |
| H Input Voltage | VIH | 0.8 | VCC | 4 | |||
| L Input Voltage | VIL | 0.2 | VCC | 4 | |||
| System Oscillator Frequency | FSYS | 12.8 | 16 | 19.2 | KHz | 5V ROSCS=430K COSCS=180P | 4 |
| Operating temperature | TA | -20 | 25 | 70 | °C | 4 | |
| Storage temperature | TSTORE | -40 | 125 | °C | 4 | ||
| Supply Voltage to Ground Potential (Input and VCC only) | -0.5 | V | Upper limit printed as Vcc+0.5V | 4 | |||
| Supply Voltage to Ground Potential (output and D/O only) | -0.5 | V | Upper limit printed as Vcc+0.5V | 4 | |||
| DC Input Voltage | -0.5 | 6 | V | 4 | |||
| DC Output Current | 20 | mA | 4 | ||||
| Power Dissipation | 500 | mW | 4 | ||||
| CDS H Transfer Voltage | VTH1 | 3 | 3.3 | 3.6 | V | VCC=5V | 4 |
| CDS L Transfer Voltage | VTL1 | 0.9 | 1.2 | 1.5 | V | VCC=5V | 4 |
| ZC H Transfer Voltage | VTH2 | 2.6 | 2.9 | 3.2 | V | VCC=5V | 4 |
| ZC L Transfer Voltage | VTL2 | 1.1 | 1.4 | 1.7 | V | VCC=5V | 4 |
| OSCS H Transfer Voltage | VTH3 | 2.7 | 3 | 3.3 | V | VCC=5V | 4 |
| OSCS L Transfer Voltage | VTL3 | 0.8 | 1 | 1.2 | V | VCC=5V | 4 |
| OSCD H Transfer Voltage | VTH4 | 2.7 | 3 | 3.3 | V | VCC=5V | 4 |
| OSCD L Transfer Voltage | VTL4 | 0.8 | 1 | 1.2 | V | VCC=5V | 4 |
| High level leakage current | I IH | -1 | 1 | A | (ZC,CDS) 5V VIH=4.5V | 4 | |
| Low level leakage current | I IL | -1 | 1 | A | (ZC,CDS) 5V VIL=0.5V | 4 | |
| RSTB Input high level current | I IHRSTB | -1 | -5 | A | 5V VIH=4.5V | 4 | |
| Output source current (RELAY, TRIAC) | IOH | -6 | mA | 5V VOH=4.5V | 4 | ||
| Output sink current (RELAY, TRIAC) | IOL | 15 | mA | 5V VOL=0.5V | 4 | ||
| Output source current (CDSO, COMPO) | IOH | -5 | mA | 5V VOH=4.5V | 4 | ||
| Output sink current (CDSO, COMPO) | IOL | 5 | mA | 5V VOL=0.5V | 4 | ||
| Regulator Output Voltage | VEE | 3.24 | 3.6 | 3.96 | V | 5V No load | 5 |
| Noninverting input of OP2 | OP2P | 1.62 | 1.8 | 1.98 | V | 5V No load | 5 |
| Line regulation | VO | 30 | 50 | mV | 4.5VCC5.5V, IL =1mA | 5 | |
| Load regulation | VLDR | 60 | 100 | mV | 5V 0.5mA IL2mA | 5 | |
| 3dB band width | BW | 10 | KHz | 5 | |||
| Threshold of windows comparator (high) | VH | 1.8 | 2 | 2.2 | V | VCC=5V | 5 |
| Threshold of windows comparator (low) | VL | 1.35 | 1.5 | 1.65 | V | VCC=5V | 5 |
| Oscillator frequency/512 | FMODE | 25 | 31.25 | 37.5 | Hz | VCC=5V, RS=430K, CS=180P (PT8A264X) | 5 |
| Delay time from ZC to TRIAC | TDZT | 1.16 | 1.45 | 1.74 | ms | 5 | |
| TRIAC Pulse Width | TTPW | 50 | 62.5 | 75 | s | 5 | |
| Delay time from ZC rising edge to Relay | TDZR | 125 | 200 | s | 5 | ||
| Power supply current | ICC | 120 | 200 | A | VCC=5V, RS=430K, CS=180P, RD=2M, CD=104, other Input Pins=GND, all outputs float. | 5 |
CAD (KiCad official)
- Symbol:
PT8A2648WEX - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
pt8a2648wex-etched.step/pt8a2648wex-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pt8a2648wex.step/pt8a2648wex.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (13 pp, sha256
b229837ef4415709, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PT8A2648WEX
**Diodes Incorporated** · Biometric Sensors · SOIC-16
PT8A2648WEX from Diodes Incorporated, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the device. |
| 2 | RELAY | output | RELAY drive output through an external NPN transistor, active high. |
| 3 | OSCD | bidirectional | Output timing oscillator I/O connected to an external RC to adjust output duration; TD = 23552/FOSCD. |
| 4 | OSCS | bidirectional | System oscillator I/O connected to an external RC to set the system frequency, which is 16KHz for normal application. |
| 5 | ZC | input | Schmitt input for AC zero crossing detection. |
| 6 | CDS | input | Connected to a CDS voltage divider for day/night detection; a low input disables the PIR input, and it is a Schmitt trigger input with 5-second debounce time. |
| 7 | MODE | tri_state | Tri-state operating mode selection input: VCC keeps the output always ON, GND keeps it always OFF, and open selects AUTO mode. |
| 8 | Vcc | power_in | Positive power supply with an operating voltage of 4.75 V to 6.0 V (5.0 V typical). |
| 9 | VEE | power_out | Regulated voltage output of about 3.6 V (3.24 V to 3.96 V) with respect to GND. |
| 10 | COMPO | output | Output of the comparator, active high; the active output width is inversely proportional to the system frequency. |
| 11 | OP1P | input | Noninverting input of OP1. |
| 12 | OP1N | input | Inverting input of OP1. |
| 13 | OP1O | output | Output of OP1. |
| 14 | OP2P | input | Noninverting input of OP2, with an internal 1.8 V default. |
| 15 | OP2N | input | Inverting input of OP2. |
| 16 | OP2O | output | Output of OP2. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOIC-16 |
| Category | Sensors |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VCC | 4.75 | 5 | 6 | V | | 4 |
| H Input Voltage | VIH | 0.8 | | | VCC | | 4 |
| L Input Voltage | VIL | | | 0.2 | VCC | | 4 |
| System Oscillator Frequency | FSYS | 12.8 | 16 | 19.2 | KHz | 5V ROSCS=430K COSCS=180P | 4 |
| Operating temperature | TA | -20 | 25 | 70 | °C | | 4 |
| Storage temperature | TSTORE | -40 | | 125 | °C | | 4 |
| Supply Voltage to Ground Potential (Input and VCC only) | | -0.5 | | | V | Upper limit printed as Vcc+0.5V | 4 |
| Supply Voltage to Ground Potential (output and D/O only) | | -0.5 | | | V | Upper limit printed as Vcc+0.5V | 4 |
| DC Input Voltage | | -0.5 | | 6 | V | | 4 |
| DC Output Current | | | | 20 | mA | | 4 |
| Power Dissipation | | | | 500 | mW | | 4 |
| CDS H Transfer Voltage | VTH1 | 3 | 3.3 | 3.6 | V | VCC=5V | 4 |
| CDS L Transfer Voltage | VTL1 | 0.9 | 1.2 | 1.5 | V | VCC=5V | 4 |
| ZC H Transfer Voltage | VTH2 | 2.6 | 2.9 | 3.2 | V | VCC=5V | 4 |
| ZC L Transfer Voltage | VTL2 | 1.1 | 1.4 | 1.7 | V | VCC=5V | 4 |
| OSCS H Transfer Voltage | VTH3 | 2.7 | 3 | 3.3 | V | VCC=5V | 4 |
| OSCS L Transfer Voltage | VTL3 | 0.8 | 1 | 1.2 | V | VCC=5V | 4 |
| OSCD H Transfer Voltage | VTH4 | 2.7 | 3 | 3.3 | V | VCC=5V | 4 |
| OSCD L Transfer Voltage | VTL4 | 0.8 | 1 | 1.2 | V | VCC=5V | 4 |
| High level leakage current | I IH | -1 | | 1 | A | (ZC,CDS) 5V VIH=4.5V | 4 |
| Low level leakage current | I IL | -1 | | 1 | A | (ZC,CDS) 5V VIL=0.5V | 4 |
| RSTB Input high level current | I IHRSTB | -1 | | -5 | A | 5V VIH=4.5V | 4 |
| Output source current (RELAY, TRIAC) | IOH | -6 | | | mA | 5V VOH=4.5V | 4 |
| Output sink current (RELAY, TRIAC) | IOL | 15 | | | mA | 5V VOL=0.5V | 4 |
| Output source current (CDSO, COMPO) | IOH | -5 | | | mA | 5V VOH=4.5V | 4 |
| Output sink current (CDSO, COMPO) | IOL | 5 | | | mA | 5V VOL=0.5V | 4 |
| Regulator Output Voltage | VEE | 3.24 | 3.6 | 3.96 | V | 5V No load | 5 |
| Noninverting input of OP2 | OP2P | 1.62 | 1.8 | 1.98 | V | 5V No load | 5 |
| Line regulation | VO | | 30 | 50 | mV | 4.5VCC5.5V, IL =1mA | 5 |
| Load regulation | VLDR | | 60 | 100 | mV | 5V 0.5mA IL2mA | 5 |
| 3dB band width | BW | 10 | | | KHz | | 5 |
| Threshold of windows comparator (high) | VH | 1.8 | 2 | 2.2 | V | VCC=5V | 5 |
| Threshold of windows comparator (low) | VL | 1.35 | 1.5 | 1.65 | V | VCC=5V | 5 |
| Oscillator frequency/512 | FMODE | 25 | 31.25 | 37.5 | Hz | VCC=5V, RS=430K, CS=180P (PT8A264X) | 5 |
| Delay time from ZC to TRIAC | TDZT | 1.16 | 1.45 | 1.74 | ms | | 5 |
| TRIAC Pulse Width | TTPW | 50 | 62.5 | 75 | s | | 5 |
| Delay time from ZC rising edge to Relay | TDZR | | 125 | 200 | s | | 5 |
| Power supply current | ICC | | 120 | 200 | A | VCC=5V, RS=430K, CS=180P, RD=2M, CD=104, other Input Pins=GND, all outputs float. | 5 |
## CAD (KiCad official)
- Symbol: `PT8A2648WEX`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `pt8a2648wex-etched.step` / `pt8a2648wex-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pt8a2648wex.step` / `pt8a2648wex.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/PT8A2641-26422645-2648.pdf) (13 pp, sha256 `b229837ef4415709`, retrieved 2026-11-21)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pt8a2648wex-datasheet.pdf)