3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPT7M3808G30TAEX
Diodes Incorporated · Monitors & Reset Circuits · SOT-23-6
PT7M3808G30TAEX from Diodes Incorporated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Open-drain output driven to a low impedance state when RESET is asserted, remaining low for the reset period after SENSE is above VIT and MR is high; a pull-up resistor from 10kΩ to 1MΩ should be used so it can reach voltages higher than VDD. |
| 2 | GND | power_in | Ground. |
| 3 | MR | input | Driving manual reset (MR) low asserts RESET; MR is internally pulled up to VDD by a 90kΩ resistor, with VIH of 0.7VDD to VDD and VIL of 0 to 0.3VDD. |
| 4 | CT | passive | Reset period programming pin: connecting it to VDD through a 40kΩ to 200kΩ resistor gives a 300ms delay, leaving it open gives a fixed 20ms delay, and a capacitor of ≥100pF to ground gives a user-programmable delay. |
| 5 | SENSE | input | Voltage monitor input connected to the voltage to be supervised; RESET is asserted if the voltage at this pin drops below the threshold voltage VIT. |
| 6 | VDD | power_in | Supply voltage, specified from 1.7V to 6.5V; place a 0.1uF ceramic capacitor close to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 1.7 | 6.5 | V | 4 | ||
| Input High Voltage for Open-drain RESET, SENSE | VIH | 0 | 6.5 | V | 4 | ||
| Operating Temperature | TA | -40 | 125 | ºC | 4 | ||
| Storage Temperature | -65 | 150 | oC | 4 | |||
| Operating Junction Temperature | TJ | -40 | 125 | oC | 4 | ||
| Input Voltage Range | VDD | -0.3 | 7 | V | 4 | ||
| Voltage Range | VCT | -0.3 | V | VDD +0.5V upper limit as printed | 4 | ||
| Other Voltage Range | VRESET, VMR, VSENSE | -0.3 | 7 | V | 4 | ||
| RESET pin Current | 5 | mA | 4 | ||||
| ESD rating, HBM | 2 | kV | 4 | ||||
| ESD rating, CDM | 500 | V | 4 | ||||
| Supply voltage | VDD | 1.7 | 6.5 | V | 4 | ||
| Supply current | IDD | 2.8 | 5 | µA | VDD=3.3V, RESET not asserted, MR, RESET, CT open. | 4 | |
| Supply current | IDD | 3 | 6 | uA | VDD=6.5V, RESET not asserted, MR, RESET, CT open. | 4 | |
| Low level output voltage | VOL | 0.3 | V | 1.3V≤VDD<1.8V, IOL=0.4mA | 4 | ||
| Low level output voltage | VOL | 0.4 | V | 1.8V≤VDD≤6.5V, IOL=1.0mA | 4 | ||
| Negative-going input threshold PT7M3808G30 | VIT | 2.77 | 2.79 | 2.804 | V | PT7M3808G30 | 4 |
| Hysteresis on VIT pin (fixed versions) | VHYS | 1 | 2.5 | %VIT | Fixed versions | 5 | |
| MR Internal pull-up resistance | RMR | 70 | 90 | k | 5 | ||
| Input current at SENSE pin (fixed versions) | ISENSE | 1.8 | µA | VSENSE=6.5V | 5 | ||
| RESET Leakage Current | IOH | 300 | nA | VRESET=6.5V, RESET not asserted | 5 | ||
| RESET delay time | tD | 12 | 20 | 28 | ms | CT=open | 5 |
| RESET delay time | tD | 180 | 300 | 420 | ms | CT=VDD | 5 |
| RESET delay time | tD | 0.75 | 1.25 | 1.75 | ms | CT=100pF | 5 |
| RESET delay time | tD | 0.7 | 1.2 | 1.7 | s | CT=180nF | 5 |
CAD (KiCad official)
- Symbol:
PT7M3808G30TAEX - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
pt7m3808g30taex-etched.step/pt7m3808g30taex-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pt7m3808g30taex.step/pt7m3808g30taex.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (13 pp, sha256
56de409e252a0b54, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).