PT7M3808G01TAEX

{
 "schema": "adom.pads/1",
 "slug": "pt7m3808g01taex",
 "footprint": "SOT-23-6",
 "generated_from": {
  "footprint": "SOT-23-6@sha256:f341c73aac9dcb55",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -1.1375,
   -0.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-23-6@sha256:f341c73aac9dcb55"
 },
 "pad_count": 6,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.1375,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "RESET",
   "type": "output",
   "description": "Active-low, open-drain RESET output. Driven to a low-impedance state when reset is asserted and remains asserted for the programmed delay after both SENSE rises above VIT and MR returns high. Requires an external pull-up (10kΩ to 1MΩ); the pull-up may be tied to a rail higher than VDD (up to 6.5V). Guaranteed VOL 0.3V @ IOL=0.4mA (1.3V<=VDD<1.8V) or 0.4V @ IOL=1.0mA (1.8V<=VDD<=6.5V); leakage <=300nA when not asserted.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.1375,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "GND",
   "type": "power_in",
   "description": "Device ground reference (0 V).",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.1375,
    0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "MR",
   "type": "input",
   "description": "Active-low manual reset input. Driving MR below 0.3*VDD asserts RESET; MR must return above 0.7*VDD to clear. Internally pulled up to VDD by a ~90kΩ (70k min) resistor, so the pin can be left floating if unused. Do not apply voltage above VDD.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.1375,
    0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "CT",
   "type": "passive",
   "description": "Reset-delay programming pin. Three modes: (a) leave open -> fixed 20ms delay; (b) tie to VDD through 40k-200kΩ -> fixed 300ms delay; (c) tie an external capacitor (>=100pF) from CT to GND -> user-programmable delay 1.25ms-10s per CT(nF)=[tD(s)-0.5e-3]x175. Charged by an internal 220nA source to 1.23V. Absolute range -0.3V to VDD+0.5V; use low-leakage (ceramic) capacitors.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.1375,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "SENSE",
   "type": "input",
   "description": "Voltage-monitor input. RESET asserts when SENSE drops below the negative-going threshold VIT (0.405V typ on the G01 adjustable variant); the comparator has ~1.5% VIT hysteresis. Input current ±25nA max on G01. Recommended to add a 1nF-10nF bypass capacitor for noise immunity. Absolute range -0.3V to +7V.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.1375,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "VDD",
   "type": "power_in",
   "description": "Supply voltage, 1.7V to 6.5V (absolute max 7.0V). Typical quiescent current ~2.8µA at 3.3V. Place a 0.1µF ceramic decoupling capacitor close to this pin.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}